Sensitivity analysis of fuel pin failure performance under slow-ramp type transient overpower condition by using a fuel performance analysis code FEMAXI-FBR

The FEMAXI-FBR is a fuel performance analysis code and has been developed as one module of core disruptive evaluation system, the ASTERIA-FBR. The FEMAXI-FBR has reproduced the failure pin behavior during slow transient overpower. The axial location of pin failure affects the power and reactivity behavior during core disruptive accident, and failure model of which pin failure occurs at upper part of pin is used by reflecting the results of the CABRI-2 test. By using the FEMAXI-FBR, sensitivity analysis of uncertainty of design parameters such as irradiation conditions and fuel fabrication tolerances was performed to clarify the effect on axial location of pin failure during slow transient overpower. The sensitivity analysis showed that the uncertainty of design parameters does not affect the failure location. It suggests that the failure model with which locations of failure occur at upper part of pin can be adopted for core disruptive calculation by taking into consideration of design uncertainties.     

Evaluation of corrosion behaviors for reactor pressure vessels/primary containment vessels in Fukushima Daiichi units 1–3 nuclear power plant

Fukushima Daiichi nuclear power plants (1F) were damaged by unprecedented severe accident in the Great East Japan Earthquake on 11 March 2011, and seawater has been injected as an emergency countermeasure for the core cooling. Although, the RPV and PCV were not supposed to be exposed to diluted seawater, they have been exposed to diluted seawater environment or high-moisture environment. Therefore, seawater corrosion has become an important issue. Immersion corrosion tests were performed for low-alloy steel of RPV material and carbon steel of PCV material in 1F cooling-water-simulated environment. As a result, the mass loss by corrosion was reduced with the decreasing temperature and chloride ion concentration. Moreover, the effects of nitrogen deaeration and Na₂WO₄ addition on corrosion protection were remarkable among the selected corrosion countermeasures. In addition, the integrity assessments of RPV and PCV were performed considering the reduction of plate thickness based on corrosion test data and the load condition based on earthquake response analysis results. It had been confirmed that primary stresses for RPV and PCV equipment satisfied with the allowable values until at least 15 years after the accident.     

Effect of regeneration temperatures in the exergetic performances of the developed desiccant-evaporative air-conditioning system

The developed desiccant-evaporative air-conditioning system was evaluated using the exergetic method under controlled environmental conditions to determine the performances of the whole system and its components.Percentage contributions of exergy destruction of system components at different regeneration temperatures and reference temperatures were determined. Exergy destruction coefficient of different components at different regeneration and reference temperatures were presented. It was shown that exergetic performances varied with respect to the regeneration and reference temperatures. The exergetic performances based on thermal, electric, total exergy input, first definition and second definition efficiencies were shown.Based on the results, reference and regeneration temperatures affected the determination of the system performances and its components. It was shown that air-heating coil, air fans and desiccant wheel contributed to large percentage of exergy destruction. Hence, the mentioned components should be given attention for further improvement of the system performances.     

Prediction of high-cycle fatigue life reliability of aluminum cast alloy from statistical characteristics of defects at meso-scale

In this paper, a growth rate law of a small fatigue crack of an arbitrary metal and a method for predicting a size distribution of spheroidal defects cut by a specimen are proposed. And then, by combining the crack growth rate law and the prediction method for the surface defect size distribution, a method for predicting a high-cycle fatigue life reliability of a metal with defects is proposed. Rotating bending fatigue tests of plain specimens with/without a small blind hole (0.3 mm in diameter, 0.15 mm in depth) are carried out on an aluminum cast alloy JIS AC4B-T6 with eutectic Si, Fe compounds and porosities. By comparing analyzed results with experimental ones, the validity of the present method is examined.     

New Attractants for Males of the Solanaceous Fruit Fly <Emphasis Type="Italic">Bactrocera latifrons</Emphasis>

α-Ionone, α-ionol, and their mixtures with phenolic volatiles act as potential male lures for the solanaceous fruit fly Bactrocera latifrons (Hendel). However, the attractiveness of these compounds is not as strong as that of other well-known tephritid male lures, such as methyl eugenol for Bactrocera dorsalis. Isophorone and isophorol, which have a partial skeletal structure of α-ionone/α-ionol (i.e., trimethylcyclohexene), were attractive to B. latifrons males, and their mixtures with α-ionol exhibited stronger activity than any of the individual compounds. We also tested 3-oxo-α-ionone, 3-oxo-α-ionol, 3-hydroxy-α-ionone, and 3-hydroxy-α-ionol, hybrid compounds between isophorone/isophorol and α-ionone/α-ionol. 3-Oxo-α-ionone and 3-oxo-α-ionol were active both as attractants and phagostimulants for males. The results suggest that the introduction of an oxygen atom at the 3-position of the α-ionone/α-ionol molecule optimizes the specific chemosensory responses in B. latifrons males.     

Polymerization of alpha-hydroxy acids by ribosomes

Over 30 years ago, Fahnestock and Rich reported intriguing data showing the capability of the ribosome to polymerize phenyllactic acid. Although the polymerization was initiated and terminated randomly on polyuridic acids, the given data convincingly suggested that the generated polymer was composed of an approximately 7:3 mixture of phenyllactic acid and phenylalanine. Despite the fact that Fahnestock's conclusion was very likely correct, there have been no reports to follow up the ribosome-catalyzed polymerization of alpha-hydroxy acids until very recently. At the end of 2007, we reported messenger RNA (mRNA)-directed polyester synthesis by using the new emerging method of genetic-code reprogramming in which alpha-hydroxy acids with various kinds of side-chains are assigned to arbitrarily chosen codons. In this work, we have achieved the ribosomal synthesis of polyesters with the sequence composition and length in a fully controlled manner according to the sequence of mRNA. This Concept article describes the background of the method development and its application to the synthesis of polyesters.     

Differences of drivers' reaction times according to age and mental workload

This study was designed to examine differences in reaction times of drivers of various age groups and to assess the influence of mental workload on reaction times. Experiments were performed on a simulated street and under other conditions to identify drivers with long reaction times and drivers whose reaction times are affected strongly by mental workloads while driving on a public road. Reaction times after hearing a buzzer were measured under five conditions: (1) sitting in a stationary vehicle, (2) executing mental calculations in a stationary vehicle, (3) driving on a simulated street, (4) executing mental calculations while driving on a simulated street, and (5) driving on a public road. Subjects were 10 drivers each of three age groups. Each experiment was performed by these subjects under the five conditions. Results showed that mental calculations increased the average reaction time for each age group. Mental calculations increased differences among age groups and individuals, and increased differences in respective drivers' individual performance. Mental calculations influenced elderly drivers' reaction times remarkably. Results also demonstrated that an experiment on a simulated street identified drivers who showed long reaction times on a public road.     

Layer-by-layer self-assembled mutilayer films of gold nanoparticles for surface-assisted laser desorption/ionization mass spectrometry

Layer-by-layer (LBL) self-assembled multilayer films of gold nanoparticles (AuNPs) on a silicon wafer were demonstrated to be promising substrates for surface-assisted laser desorption/ionization (SALDI) mass spectrometry (MS) of peptides and environmental pollutants for the first time. LBL multilayer films, (AuNPs/PAHC)n, consisting of alternating layers of ammonium citrate capped AuNPs and poly(allylamine hydrochloride) (PAHC) were prepared on a silicon surface. Silicon plates with aggregated AuNPs were more suitable than those with dispersed AuNPs for the SALDI-MS of peptides. The number of particle layers had a significant effect on the laser desorption/ionization of angiotensin I; the peak intensity of the peptide (molecular ion amount) increased with an increase in the number of layers of AuNPs. As a result, the (AuNPs/PAHC)5 multilayer films increased the sensitivity of the angiotensin I to subfemtomoles and raised the useful analyte mass range, thus making it possible to detect small proteins (a 12 kDa cytochrome c). The signal enhancement when using (AuNPs/PAHC)5 may be due to (i) the high absorption of the UV laser light at 337 nm by the AuNP layers, (ii) the low thermal conductivity due to the AuNPs being covered with a thin monolayer of PAHC, and (iii) the increase in the surface roughness (approximately 100 nm) with the number of AuNP layers. Thus, laser-induced rapid high heating of AuNPs for effective desorption/ionization of peptides is possible. In addition, it was found that (AuNPs/PAHC)5 could be used to extract environmental pollutants (pyrene and dimethyldistearylammonium chloride) from very dilute aqueous solutions with concentrations less than 10(-10) mg/mL, and the analytes trapped in the LBL film could be identified by introducing the film directly into the SALDI mass spectrometer without needing to elute the analytes out of the film.