Dirac Cone Spin Polarization of Graphene by Magnetic Insulator Proximity Effect Probed with Outermost Surface Spin Spectroscopy

The effects of the proximity contact with magnetic insulator on the spin‐dependent electronic structure of graphene are explored for the heterostructure of single‐layer graphene (SLG) and yttrium iron garnet Y₃Fe₅O₁₂ (YIG) by means of outermost surface spin spectroscopy using a spin‐polarized metastable He atom beam. In the SLG/YIG heterostructure, the Dirac cone electrons of graphene are found to be negatively spin polarized in parallel to the minority spins of YIG with a large polarization degree, without giving rise to significant changes in the π band structure. Theoretical calculations reveal the electrostatic interfacial interactions providing a strong physical adhesion and the indirect exchange interaction causing the spin polarization of SLG at the interface with YIG. The Hall device of the SLG/YIG heterostructure exhibits a nonlinear Hall resistance attributable to the anomalous Hall effect, implying the extrinsic spin–orbit interactions as another manifestation of the proximity effect.     

Annealing effects of a high-quality ZnTe substrate

The sharp photoluminescence (PL) and optical-reflection spectra in the bandedge region of the high-quality nondoped ZnTe substrate (100) were observed at 4.2 K. Free exciton, associated with lower and upper polaritons (EX^L and EX^U) at 2.382 eV and 2.381 eV, respectively, were clearly observed. This meant that this substrate was high quality. The intensity of a bound exciton peak (2.375 eV), which is caused by a Zn vacancy, of a neutral acceptor decreased with an increase of the Zn vapor pressures.     

Microfluidic Spinning of Cell‐Responsive Grooved Microfibers

Engineering living tissues that simulate their natural counterparts is a dynamic area of research. Among the various models of biological tissues being developed, fiber‐shaped cellular architectures, which can be used as artificial blood vessels or muscle fibers, have drawn particular attention. However, the fabrication of continuous microfiber substrates for culturing cells is still limited to a restricted number of polymers (e.g., alginate) having easy processability but poor cell–material interaction properties. Moreover, the typical smooth surface of a synthetic fiber does not replicate the micro‐ and nanofeatures observed in vivo, which guide and regulate cell behavior. In this study, a method to fabricate photocrosslinkable cell‐responsive methacrylamide‐modified gelatin (GelMA) fibers with exquisite microstructured surfaces by using a microfluidic device is developed. These hydrogel fibers with microgrooved surfaces efficiently promote cell encapsulation and adhesion. GelMA fibers significantly promote the viability of cells encapsulated in/or grown on the fibers compared with similar grooved alginate fibers used as controls. Importantly, the grooves engraved on the GelMA fibers induce cell alignment. Furthermore, the GelMA fibers exhibit excellent processability and could be wound into various shapes. These microstructured GelMA fibers have great potential as templates for the creation of fiber‐shaped tissues or tissue microstructures.     

Strong Surface‐Termination Effect on Electroresistance in Ferroelectric Tunnel Junctions

Tunnel electroresistance in ferroelectric tunnel junctions (FTJs) has attracted considerable interest, because of a promising application to nonvolatile memories. Development of ferroelectric thin‐film devices requires atomic‐scale band‐structure engineering based on depolarization‐field effects at interfaces. By using FTJs consisting of ultrathin layers of the prototypical ferroelectric BaTiO₃, it is demonstrated that the surface termination of the ferroelectric in contact with a simple‐metal electrode critically affects properties of electroresistance. BaTiO₃ barrier‐layers with TiO₂ or BaO terminations show opposing relationships between the polarization direction and the resistance state. The resistance‐switching ratio in the junctions can be remarkably enhanced up to 10⁵% at room temperature, by artificially controlling the fraction of BaO termination. These results are explained in terms of the termination dependence of the depolarization field that is generated by a dead layer and imperfect charge screening. The findings on the mechanism of tunnel electroresistance should lead to performance improvements in the devices based on nanoscale ferroelectrics.     

3D Micromolding of Arrayed Waveguide Gratings on Upconversion Luminescent Layers for Flexible Transparent Displays without Mirrors,Electrodes, and Electric Circuits

A new technique for the fabrication of arrayed waveguide gratings on upconversion luminescent layers for flexible transparent displays is reported. Ho³⁺‐ and Yb³⁺‐codoped NaYF₄ nanoparticles are synthesized by hydrothermal techniques. Transparent films consisting of two transparent polymers on the NaYF₄ nanoparticle films exhibit mechanical flexibility and high transparence in visible region. Patterned NaYF₄ nanoparticle films are fabricated by calcination‐free micromolding in capillaries. Arrayed waveguide gratings consisting of the two transparent polymers are formed on the patterned NaYF₄ nanoparticle films by micromolding in capillaries. Green and red luminescence is observed from the upconversion luminescent layers of the NaYF₄ nanoparticle films in the arrayed waveguide gratings under excitation at 980 nm laser light. Arrayed waveguide gratings on the upconversion luminescent layers are fabricated with Er³⁺‐doped NaYF₄ nanoparticles which can convert two photons at 850 and 1500 nm into single photon at 550 nm. These results demonstrate that flexible transparent displays can be fabricated by constructing arrayed waveguide gratings on upconversion luminescent layers, which can operate in nonprojection mode without mirrors, transparent electrodes, and electric circuits.     

Effective passivation of defects in Ge-rich SiGe-on-insulator substrates by Al2O3 deposition and subsequent post-annealing

A method of Al₂O₃ deposition and subsequent post-deposition annealing (Al₂O₃-PDA) was proposed to passivate electrically active defects in Ge-rich SiGe-on-insulator (SGOI) substrates, which were fabricated using Ge condensation by dry oxidation. The effect of Al₂O₃-PDA on defect passivation was clarified by surface analysis and electrical evaluation. It was found that Al₂O₃-PDA could not only suppress the surface reaction during Al-PDA in our previous work [Yang H, Wang D, Nakashima H, Hirayama K, Kojima S, Ikeura S. Defect control by Al-deposition and the subsequent post-annealing for SiGe-on-insulator substrates with different Ge fractions. Thin Solid Films 2010; 518: 2342-5.], but could also effectively passivate p-type defects generated during Ge condensation. The concentration in the range of 10¹⁶-10¹⁸ cm⁻³ for defect-induced acceptors and holes in Ge-rich SGOI drastically decreased after Al₂O₃-PDA. As a result of defect passivation, the electrical characteristics of both back-gate p-channel and n-channel metal-oxide-semiconductor field-effect transistors fabricated on Ge-rich SGOI were greatly improved after Al₂O₃-PDA.     

A Low-Loss Built-In Current Sensor

This paper presents a novel built-in current sensor that uses two additional power supply voltages besides the system power supply voltage, and that is constructed by using a current mirror circuit to pick up an abnormal IDDQ. It is activated only by an abnormal quiescent power supply current and minimizes the voltage drop at the terminal of the circuit under test. Simulation results showed that it could detect 16-A IDDQ against 0.03-V voltage drop at 3.3-V VDD and that it reduced performance degradation in the circuit under test. It is therefore suitable for testing low-voltage integrated circuits. Moreover, we verified the behavior of the sensor circuit implemented on the board by using discrete devices. Experimental results showed that the real circuit of the sensor functioned properly.     

Highly Reproducible and Regulated Conductance Quantization in a Polymer‐Based Atomic Switch

A detailed understanding of the conductance quantization and resistive switching phenomena in redox‐based memories is crucial for realizing atomic‐scale memory devices and for finding the adequate design principles on which they can be based. Here, the emergence of quantized conductance states and their correlation with resistive switching characteristics in polymer‐based atomic switches are investigated using combinations of current–voltage measurements and first‐principles density functional theory (DFT) simulations. Various conductance states, including integer and half‐integer multiples of a single atomic point contact and fractional conductance variations, are observed in an Ag/polyethylene oxide/Pt device under sweeping of bias voltage. Moreover, highly controllable and reproducible quantized conductance behaviors by tuning the voltage sweep rate and the sweep voltage range, suggesting well‐controlled formation of the atomic point contact, are demonstrated. The device also exhibits longer retention times for higher conductance states. The DFT simulations reveal the transmission eigenstate of geometrically optimized atomic point contact structures and the impact of the atomic configurations and structural stability on the conductance state, which also explains their resistive switching behaviors. The well‐defined, multiple quantized conductance states observed in these polymer‐based atomic switches show promise for the development of new multilevel memory devices.