Secondary ion emission from beryllium surfaces by Ar and /or (Ar+D2) mixed ion bombardments

With respect to the impurity emission and erosion of a Be first wall, a secondary ion mass spectrometric investigation was carried out along with surface characterization with X-ray photoelectron spectroscopy. It was found that Be is emitted as distinct types of chemical forms from the surface owing to sputtering with Ar⁺ and an (Ar⁺+ D⁺₂) mixture: (i) Be and Be-cluster, (ii) oxide and hydroxide, and (iii) hydride and/or deuteride.     

Structure and mechanical properties of a thermal-sprayed nickle-20wt.%chromium alloy

Powder of a nickel-chromium alloy (about 20 wt.% chromium) was low pressure plasma sprayed onto substrates which were cooled to various extents. As the maximum temperature of the sprayed deposit was increased up to approximately 1148–1235 K during spraying, the strength of the deposit, measured on tensile test pieces machined from the deposit, increased owing to the combined effects of precipitation strengthening and enhancement of adhesion between the flattened particles composing the deposit. It is proposed that an adequate rise in temperature of the deposit during spraying improves its strength more effectively than annealing a deposit held at low temperatures during spraying, as long as the heating temperature and the heating time of these two deposits are similar to each other.     

A complex baseband platform for spatial-temporal mobile radio channel simulations

Joint spatial-temporal signal processing has been recognized as the key to reducing the effects of the intersymbol and cochannel interference seen in very high bit-rate mobile radio communications systems. Developing hardware simulators that can simulate mobile radio propagation scenarios in time and space domains is essential for evaluating the real-time performance of spatial-temporal signal processing schemes. This paper outlines a complex baseband platform developed for spatial-temporal mobile radio channel simulations. The platform consists of a complex baseband fading/array response simulator, a digital signal processor (DSP) board, and a general-purpose parameter estimator that uses systolic array implementation of the recursive least square (RLS) algorithm. Results of experiments conducted using the developed platform are presented to confirm the proper operation of the system.     

Magnetic properties of melt-spun Nd-Fe-Co-B-Cu-Nb system alloys and their bonded magnets

Melt-spun ribbons of Nd-Fe-Co-B-Cu-Nb system alloys were prepared by the single roller rapid-quenching method. The effects of composition, wheel velocity and heat-treatment on the magnetic properties were investigated. The magnetic properties of bonded magnets prepared by compression molding of optimally annealed ribbons were also measured. A maximum energy product of 152.1 kJ/m³ was obtained for the Nd₁₁Fe₇₂Co₈B_7.5Cu_0.5Nb_1.0 alloy ribbon prepared at a wheel velocity of 17.1 m/s. From the TEM observation on the above Nd₁₁Fe₇₂Co₈B_7.5Cu_0.5Nb_1.0 ribbon, the particle size of these ribbons was determined to be between 10 and 40 nm. It is conjectured that the high remanence is observed by the magnetic interaction of these fine particles, and it was found that these fine particles were achieved by Nd-Fe-Co-B compound in addition with Nb and Cu at the same time. The amorphous Nd₁₁Fe₇₂Co₈B_7.5Cu_0.5Nb_1.0 ribbons prepared at a wheel velocity of 20.7 m/s were crystallized by heat treatment, and the optimum annealing condition was found to be at 650°C for 15 min. Its corresponding value of (BH)_max is 144.5 kJ/m³. A maximum energy product of 88.1 kJ/m³ was achieved with Nd₁₁Fe₇₂Co₈B_7.5Cu_0.5Nb_1.0 bonded magnets made from the optimally prepared ribbons.     

Harmonic analysis of a single-phase rectifier with a DC filter capacitor

A single-phase diode bridge rectifier with a filter capacitor on the dc side is often employed to convert ac input into a dc voltage. The input current of the rectifier contains harmonic currents which cause undesirable power line effects. Recently, a method using the time domain analysis has been proposed to calculate the harmonic currents of rectifier considering noninfinite capacitance, i.e., non-zero dc side impedance. This method is very accurate, but it requires a long computing time and a complicated algorithm. This paper proposes a new method that makes it possible to easily calculate the harmonic currents taking into account the effects of the ac and dc side impedances of rectifier. The proposed method, which is based on the frequency domain method, can be executed only with the algebraic computation, and its accuracy is quite high. The validity of the proposed method is also demonstrated by comparison with the results of time simulation.     

Molecular cloning of a novel cytokine cDNA encoding the ninth member of the fibroblast growth factor family, which has a unique secretion property

Glia-activating factor (GAF) is a novel heparin-binding growth factor purified from the culture supernatant of a human glioma cell line. It shows a spectrum of activity slightly different from those of other known growth factors. We have isolated the cDNA which encodes human GAF. A homology search revealed that GAF would be the ninth member of the FGF family, and we therefore call it FGF-9. The human FGF-9 cDNA cloned by using oligonucleotide probes encoded a polypeptide consisting of 208 amino acids. Sequence similarity to other members of the FGF family was estimated to be around 30%. Two cysteine residues and other consensus sequences in family members were also well conserved in the FGF-9 sequence. FGF-9 was found to have no typical signal sequence in its N terminus like those in acidic FGF and basic FGF. Acidic FGF and basic FGF are known not to be secreted from cells in a conventional manner. However, FGF-9 was found to be secreted from cells after synthesis despite its lack of a typical signal sequence. It could be detected exclusively in the culture medium of cDNA-transfected COS cells. The amino acid sequence of proteins purified from culture supernatant of the CHO cell line, which was cDNA transfected and selected as a high producer of FGF-9, showed that no peptides were cleaved from the N terminus except the initiation methionine. The rat FGF-9 cDNA was also cloned, and the structural analysis indicated that the PGF-9 gene is highly conserved. Expression of the FGF-9 gene could be detected in the brain and kidney of the adult rat. Restricted gene expression in organs and the unique secretion nature of the protein suggest that FGF-9 plays a physiological role which differs from those of well-characterized acidic FGF and basic FGF.     

Raman scattering from He II near the two-roton threshold. I. A new formulation

A new formalism will be proposed for the Raman scattering from He II near the two-roton threshold. By showing that the processes including long wavelength photons in the intermediate states are enhanced it is found that the Raman intensity is proportional to the multi-phonon part of the structure factor. To study the structure factor the atomic density fluctuation is expanded in terms of the phonon-roton operators. Based on it the Hamiltonian for the elementary excitations is constructed. Then the structure factor is shown proportional to the generalized density of states of interacting rotons (GDOSIR): It contains the form-factor of a roton-pair creation from the atomic density at every vertex of ladder processes as well as at the places where the pair is created and annihilated by light quanta. Thanks to the commitment of long wave-length photons the proposed formalism is automatically free from the hard-core problem, with which the conventional ones should inevitably confront but were unable to cope.     

Development of peak load forecasting system using neural networks and fuzzy theory

This paper presents a peak load forecasting system using multilayer neural networks and fuzzy theory. Electric load forecasting in power systems is a very important task from the perspective of reliability and economic operation. Daily peak load forecasting is one of the basic operations of generation scheduling for the following day. Therefore, many statistical methods have been developed and used for such forecasting even though it has been difficult to construct a proper functional model. The developed system is applied by neural network and fuzzy theory to forecast for daily, weekly and monthly peak load. The system consists of an engineering workstation (EWS) and a personal computer (PC). The EWS is for learning and data-bases, and the PC is for man-machine interface such as forecasting operation. The system has been used since June 1993. The result evaluated with an absolute mean error is 1.63 percent for 10 months. From the results shown here, the system applied by neural network and fuzzy theory has high validity.