Thermal Expansion of Solid Solutions in the ZrTiO4—In2O3—M2O5 (M = Sb, Ta) System

Axial and dilatometric thermal expansions and phase transformations were studied for solid solutions having the α-PbO₂ structure in the ZrTiO₄—In₂O₃—M₂O₅ (M = Sb, Ta) system with nominal formulas of Zr _x Ti _y In _z Sb _z O₄ and Zr _x Ti _y In _z Ta _z O₄ where x + y + 2 z = 2. With increased substitution of z , the cell volume increased, the difference in the b parameters at room temperature between those quenched from 1400° and 1000°C decreased, and the thermal expansion decreased. The axial thermal expansion of ZrTi _y In _z · Ta _z O₄ with z = 0.3 was almost identical with that of HfTiO₄, and those with z = 0.4 and z = 0.45 were smaller than that of HfTiO₄. Unit-cell volumes of these compound were compared with those of single oxides to make it clear that the unit-cell volume of ZrTiO₄ was small anomalously and to distinguish the normal and abnormal substitution systems. These results were explained by the working hypothesis proposed for these compounds.     

Development of a high‐resolution RGBW flexible display using a white organic light‐emitting diode with microcavity structure and that of a side‐roll touch panel

In this study, white organic electroluminescent devices with microcavity structures were developed. A flexible high‐resolution active‐matrix organic light‐emitting diode display with low power consumption using red, green, blue, and white sub‐pixels formed by a color‐filter method was fabricated. In addition, a side‐roll touch display was developed in combination with a capacitive flexible touch screen.     

Aging and availability of binocular disparity and pictorial depth cues in 3D graphics contents

Some stereoblind observers do not perceive depth of 3D stimuli that depends on binocular disparity. These individuals, who have no disabilities, comprise over 5% of the general population. In addition, 17–30% of nonstereoblind young and young–middle people do not use disparity information in certain 3D environments, a phenomenon known as pseudo‐stereoblindness. This study aimed to investigate the relationship between aging and the proportion of pseudo‐stereoblindness in the general population. In an experiment, 134 nonstereoblind participants, ranging in age from 17 to 83 years, judged subjective depth of 3D stimuli containing binocular disparity and pictorial depth cues. Results showed that the proportion of pseudo‐stereoblindness among young (17–24 years old) and young–middle aged observers (25–39 years old) was 29%, in both cases. However, the proportion of pseudo‐stereoblind observers increased in older populations: 65% and 82% in the middle (40–54 years old) and senior (55–83 years old) age groups, respectively. These results suggest that a number of people, especially in elderly populations, have trouble perceiving depth from binocular disparity in 3D graphic contents despite their essential ability to use disparity information.     

Phase Formation and Microstructure of Titanium Oxides and Composites Produced by Thermal Plasma Oxidation of Titanium Carbide

The phase formation and microstructure of titanium oxides and composites produced by Ar–O₂ thermal plasma oxidation of titanium carbide powders were investigated in detail by X-ray diffraction (XRD) and transmission electron microscopy (TEM). Relationships between the phase compositions and microstructures of the oxides were established by combined structural and phase analyses, in correlation with synthesis conditions and phase formation mechanisms. It is revealed that vapor condensation favored the formation of anatase, which existed as smaller particles, while liquid/solid oxidation favored the formation of rutile, which appeared as larger particles or composites. A higher oxygen input in the plasma gases (Ar + O₂) enhanced the formation of anatase due to impeded oxidation and evaporation. A small amount of Ti₄O₇ and Ti₃O₅ was detected in the larger particles coexisting with rutile or TiC. These suboxides were formed as intermediates in solid oxidation of TiC or precipitated from the Ti–C–O melt during cooling. Furthermore, extensive cracks, dislocations and stresses were observed in the monolithic rutile and composites, in association with the rapid quenching in this high-temperature in-flight oxidation process.     

Prediction model of surface residual stress within a machined surface by combining two orthogonal plane models

The variation of surface residual stress within a machined surface layer caused by face turning was studied. The size of the tool’s corner radius and the feed rate affect residual stress. A process model using the finite element method is proposed and the mechanical effects of the corner radius and feed rate on a machined surface were discussed. When a tool with a small corner radius is used, surface residual stress perpendicular to the cutting direction becomes compression stress. As well, surface residual stress changes from tension to compression as the feed rate decreases. The process model consists of an orthogonal cutting simulation and an indentation-like simulation of a corner radius into a work piece surface. The simulated results show quantitative agreement with the residual stress measured experimentally. The integrity of the machined surface will be controlled more efficiently if the cutting conditions during finishing are determined with the proper consideration of the surface generating process.     

An Advanced Oscillation Mixing Method for Improving the Cooling Uniformity in Quenching

In quenching, the cooling uniformity is most important to diminish distortion occurring on work pieces. As a trial to accomplish uniform cooling, therefore, there exist various mixing methods of a quenchant and the quenchant circulation with an external pump has so far been the well accepted mixing method. However, this study proposes an advanced oscillation mixing method that can improve more the cooling uniformity in quenching. The proposed method includes a stirrer in oscillating motion, so that the simultaneous oscillating and mixing movements of the stirrer are considered to provide efecfively the uniform cooling characteristics for the quenchant. In comparison with the case of the circulation pump mixing, the investigation using the oscillation mixing method has demonstrated the following two experimental facts:(1) the short vapor blanket stage caused by the quick breakage of the oil vapor blanket and (2) the reduced variation of the quenching distortion.     

Measurement of self-diffusion coefficients in Li ionic conductors by using the short-lived radiotracer of 8Li

For the effective use of short-lived radioactive beams, soon to be available at the Tokai Radioactive Ion Accelerator Complex, the authors have developed a radiotracer method for diffusion studies in solids. The experimental test was performed by the measurement of the diffusion coefficients of Li in a sample of the compound βLiAl using an α-emitting radiotracer of ⁸Li (T_1/2=0.84 s). It was found that the time-dependent yields of the α particles from the diffusing ⁸Li that was initially implanted in the sample could be used as a measure of the diffusivity of the tracer in a nondestructive way. The method was applied to measure the self-diffusion coefficients of Li in βLiGa, and for investigating how the Li diffusion in the Li ionic conductors is affected by the concentration of atomic defects (i.e., the existence of the atomic vacancies of Li and the defects in Ga sites that are replaced by Li).     

Chain-reaction solution update in MOEA/D and its effects on multi- and many-objective optimization

MOEA/D is one of the promising evolutionary algorithms for multi- and many-objective optimization. To improve the search performance of MOEA/D, this work focuses on the solution update method in the conventional MOEA/D and proposes its alternative, the chain-reaction solution update. The proposed method is designed to maintain and improve the variable (genetic) diversity in the population by avoiding duplication of solutions in the population. In addition, the proposed method determines the order of existing solutions to be updated depending on the location of each offspring in the objective space. Furthermore, when an existing solution in the population is replaced by a new offspring, the proposed method tries to reutilize the existing solution for other search directions by recursively performing the proposed chain-reaction update procedure. This work uses discrete knapsack and continuous WFG4 problems with 2–8 objectives. Experimental results using knapsack problems show the proposed chain-reaction update contributes to improving the search performance of MOEA/D by enhancing the diversity of solutions in the objective space. In addition, experimental results using WFG4 problems show that the search performance of MOEA/D can be further improved using the proposed method.     

Variable space diversity, crossover and mutation in MOEA solving many-objective knapsack problems

In this work, we analyze variable space diversity of Pareto optimal solutions (POS) and study the effectiveness of crossover and mutation operators in evolutionary many-objective optimization. First we examine the diversity of variables in the true POS on many-objective 0/1 knapsack problems with up to 20 items (bits), showing that variables in POS become noticeably diverse as we increase the number of objectives. We also verify the effectiveness of conventional two-point and uniform crossovers, Local Recombination that selects mating parents based on proximity in objective space, and two-point and uniform crossover operators which Controls the maximum number of Crossed Genes (CCG). We use NSGA-II, SPEA2, IBEA _??+? and MSOPS, which adopt different selection methods, and many-objective 0/1 knapsack problems with $n=\{100,250,500,750,\mbox{1,000}\}$ items (bits) and m?=?{2,4,6,8,10} objectives to verify the search performance of each crossover operator. Simulation results reveal that Local Recombination and CCG operators significantly improve search performance especially for NSGA-II and MSOPS, which have high diversity of genes in the population. Also, results show that CCG operators achieve higher search performance than Local Recombination for m?≥?4 objectives and that their effectiveness becomes larger as the number of objectives m increases. In addition, the contribution of CCG and mutation operators for the solutions search is analyzed and discussed.