Note: high-pressure generation using nano-polycrystalline diamonds as anvil materials

Nano-polycrystalline diamonds (NPDs) consist of nanosized diamond grains oriented in random directions. They have high toughness and isotropic mechanical properties. A NPD has neither the cleavage feature nor the anisotropy of hardness peculiar to single-crystal diamonds. Therefore, it is thought to be useful as a diamond anvil. We previously reported the usefulness of a NPD as an anvil for high-pressure development. In this study, some additional high-pressure generating tests using diamond anvils of various shapes prepared from NPDs were conducted to investigate the advantage of using NPDs for anvil applications. The results revealed that the achievable pressure value of a NPD anvil with a culet size of more than 300 μm is about 1.5 to 2 times higher than that of single-crystal diamond anvils, indicating that NPD anvils have considerable potential for large-volume diamond anvils with large culet sizes.     

A versatile planar QCM-based sensor design for nonlabeling biomolecule detection

Despite high theoretical sensitivity, low-cost manufacture, and compactness potentially amenable to lab-on-a-chip use, practical hurdles have stymied the application of the quartz crystal microbalance (QCM) for aqueous applications such as detection of biomolecular interactions. The chief difficulty lies in achieving a sufficiently stable resonance signal in the presence of even minute fluctuations in hydrostatic pressure. In this work, we present a novel versatile planar sensor chip design (QCM chip) for a microliter-scale on-line biosensor. By sealing the quartz resonator along its edges to a flat, solid support, we provide uniform support for the crystal face not exposed to solvent, greatly decreasing deformation of the crystal resonator under hydrostatic pressure. Furthermore, this cassette design obviates the need for direct handling when exchanging the delicate quartz crystal in the flow cell. A prototype 27-MHz sensor signal exhibited very low noise over a range of flow rates up to 100 microL/min. In contrast, signals obtained from a conventional QCM sensor employing an O-ring-based holder were less stable and deteriorated even further with increasing flow rate. Additional control designs with intermediate amounts of unsupported undersurface yielded intermediate levels of stability, consistent with the interpretation that deformation of the crystal resonator under fluctuating hydraulic pressure is the chief source of noise. As a practical demonstration of the design's high effective sensitivity, we readily detected interaction between myoglobin and surface-bound antibody.     

Relationship between transition of fracture mode of carbon fiber-reinforced plastic and glass transition temperature of its resin

In this study, the correlation between the stress–strain behavior of a carbon fiber-reinforced plastic (CFRP) and the temperature at which the heat-affected zone (HAZ) is generated is investigated. First, CFRP ([?45/45]_2s laminate) specimens were heated at several temperatures to induce thermal damage, i.e. a HAZ. Subsequently, tensile tests were conducted on the specimens with thermal damage. Then, microscopy and X-ray measurements were carried out to discuss the stress–strain responses from a microscopic viewpoint. The results of strain measurement during thermal treatment indicated that the strain increases with increasing temperature. The tensile tests showed that the CFRP specimens subjected to thermal damage during heating at a high temperature fractured in the ductile mode, whereas the fracture mode of the CFRP specimens with low-temperature thermal damage was discontinuous. Microstructure observation using X-ray tomography showed that the debonding between the carbon fibers and the resin matrix induced by heating to above the glass transition temperature was responsible for the continuous fracture mode.     

New type motor for tough hard disk drive

A new type fluid dynamic bearing spindle motor has been developed for use in a small hard disk drive for mobile applications. Classified as an untied type motor in its basic construction, the new motor is constructed so that it prevents oil leakage and enhances the rigidity of the hard disk drive chassis. The characteristic structural feature of the motor is a hollow rotary spindle through which a stationary shaft is installed. The stationary shaft does not interfere with spindle rotation. Since the stationary shaft is secured between the top cover and base chassis, the motor enhances hard disk drive chassis rigidity, which is an advantage that cannot be achieved by the conventional untied type motor. Although measuring small and thin, the motor has excellent rotational accuracy and shock resistance.     

浸没式光刻的优势和可行性

浸没式光刻通过高折射率的液体充入透镜底部和片子之间的空间使光学系统的数值孔径具有显著的优势。在193nm曝光系统中,水(折射率为1.44)被选作最佳的浸入液体。通过成像模拟,现已证明ArF穴193nm雪浸没式光刻(NA=1.05～1.23)与F2穴157nm雪干法穴NA=0.85～0.93雪光刻具有几乎相同的成像性能。结合流体力学和热模拟结果,讨论了ArF浸没式曝光设备的优势和可行性。     

Sar1 Affects the Localization of Perilipin 2 to Lipid Droplets

Lipid droplets (LDs) are intracellular organelles that are ubiquitous in many types of cells. The LD core consists of triacylglycerols (TGs) surrounded by a phospholipid monolayer and surface proteins such as perilipin 2 (PLIN2). Although TGs accumulate in the phospholipid bilayer of the endoplasmic reticulum (ER) and subsequently nascent LDs buds from ER, the mechanism by which LD proteins are transported to LD particles is not fully understood. Sar1 is a GTPase known as a regulator of coat protein complex Ⅱ (COPⅡ) vesicle budding, and its role in LD formation was investigated in this study. HuH7 human hepatoma cells were infected with adenoviral particles containing genes coding GFP fused with wild-type Sar1 (Sar1 WT) or a GTPase mutant form (Sar1 H79G). When HuH7 cells were treated with oleic acid, Sar1 WT formed a ring-like structure around the LDs. The transient expression of Sar1 did not significantly alter the levels of TG and PLIN2 in the cells. However, the localization of PLIN2 to the LDs decreased in the cells expressing Sar1 H79G. Furthermore, the effects of Sar1 on PLIN2 localization to the LDs were verified by the suppression of endogenous Sar1 using the short hairpin RNA technique. In conclusion, it was found that Sar1 has some roles in the intracellular distribution of PLIN2 to LDs in liver cells.     

Numerical simulation of deflecting flow in a symmetric enlarged channel

Numerical results of three-dimensional separated flow and heat transfer in a rectangular channel with a suddenexpansion are presented in this paper.Numerical simulations of Navier-Stokes and energy equations are carriedout using the finite difference method.The results of three-dimensional calculations are compared with thetwo-dimensional ones,and effects of the aspect ratio of channel upon the flow are shown.The transition fromsymmetric to asymmetric flow appears at lower Reynolds number as increasing the aspect ratio.The details oflocal heat transfer characteristics in two different separated flow regions on two downstream walls are clarified.Two-dimensionality of the flow and heat transfer almost disappears for the aspect ratio considered.     

Hematopoietic–Mesenchymal Signals Regulate the Properties of Mesenchymal Stem Cells

It is well known that the properties of hematopoietic stem/progenitor cells (HSCs), such as their self-renewal ability and multipotency, are maintained through interactions with mesenchymal stem/stromal cells (MSCs). MSCs are rare cells that are present in the bone marrow and are useful for clinical applications due to their functional ability. To obtain the necessary number of cells, MSCs must be cultured to expand, but this causes a remarkable decrease in stem cell properties, such as multipotency and proliferation ability. In this study, we show that the c-Mpl signal, which is related to the maintenance of hematopoietic stem cells, has an important effect on the proliferation and differentiation ability of MSCs. Utilizing a co-culture system comprising MSCs and HSCs, it is suggested that signaling from hematopoietic cells to MSCs supports cell proliferation. Interestingly, the enhanced proliferation ability of the HSCs was decreased in c-Mpl knock-out HSCs (c-Mpl-KO). In addition, the MSCs co-cultured with c-Mpl-KO HSCs had reduced MSC marker expression (PDGFRa and Sca-1) compared to the MSCs co-cultured with c-Mpl-wild-type HSCs. These results suggest that a hematopoietic–mesenchymal signal exists, and that the state of the HSCs is important for the stability of MSC properties.     

Te concentration dependent photoemission and inverse-photoemission study of FeSe1?xTex

We have characterized the electronic structure of FeSe_1−xTe_x for various x values using soft x-ray photoemission spectroscopy (SXPES), high-resolution photoemission spectroscopy (HRPES) and inverse photoemission spectroscopy (IPES). The SXPES valence band spectral shape shows that the 2 eV feature in FeSe, which was ascribed to the lower Hubbard band in previous theoretical studies, becomes less prominent with increasing x. HRPES exhibits systematic x dependence of the structure near the Fermi level (E_F): its splitting near E_F and filling of the pseudogap in FeSe. IPES shows two features, near E_F and approximately 6 eV above E_F; the former may be related to the Fe 3d states hybridized with chalcogenide p states, while the latter may consist of plane-wave-like and Se d components. In the incident electron energy dependence of IPES, the density of states near E_F for FeSe and FeTe has the Fano lineshape characteristic of resonant behavior. These compounds exhibit different resonance profiles, which may reflect the differences in their electronic structures. By combining the PES and IPES data the on-site Coulomb energy was estimated at 3.5 eV for FeSe.