Effects of 17 beta-estradiol on nitric oxide and ventricular myocardium metabolism

BACKGROUND: Arrhythmias are frequent pathology in patients with chronic hemodialysis. We evaluated whether a relatively new technique, signal averaging, could be useful in predicting the development of complex arrhythmias in these patients. METHODS: Thirty-three patients, 18 male and 15 female, subjected to thrice weekly chronic hemodialytic treatment with various dialysis techniques, were studied. Exclusion criteria were the presence of antiarrhythmic and inotropic treatment. The following examinations were carried out in all patients: a Holter dynamic electrocardiography for a duration of 24 hours, begun on the day of dialysis, high resolution ECG pre- and post-dialysis to find out if there were any ventricular late potential (VLP). Four hundred beats were examined in order to obtain a background noise of less than 0.7 microV and a better definition of the signal. The following parameters were considered significant for the presence of VLP: a) filtered QRS duration > 120 msec; b) the root mean square of the signal expressed in the terminal portion of QRS (RMS) < 25 microV) high frequency low amplitude signals duration (HFLA) > 40 msec. A positive value in two of these parameters was considered indicative of the presence of VLP. In addition various pre and post-dialysis indices of dialytic efficiency and a mono and two-dimensional echocardiogram with pulsed and color Doppler were carried out. Of the 33 patients studied, ten were excluded because they presented too high a background noise at the high resolution ECG. Of the remaining 23 patients, 13 (56%) presented VLP and nine of these (69%) presented complex arrhythmias. Of the ten patients without VLP, 5 (50%) presented complex arrhythmias. The incidence of arrhythmias was highest during the last two hours of dialysis and in the two hours following it. The patients were then divided into two groups (A and B) according to the ejection fraction (EF) found at the echocardiogram. Group A was composed of 17 patients of whom 8 (47%) presented complex arrhythmias; group B (EF < 45%) was composed of the remaining six patients, who all presented complex arrhythmias. In group A nine patients (53%) out of 17 had LVP, in group B four out of six (66%) had it. All the patients except one presented an increase in the thickness of the ventricular wall and alterations of Doppler transmitral filling rate. Left ventricular hypertrophy was diagnosed in 22 out of the 23 patients. Four patients also had chronic ischaemic heart disease; of these three had LVP. There was no correlation between the presence of LVP and the hemodialytic indices and between the latter and complex arrhythmias. CONCLUSIONS: Our study showed that arrhythmias are more frequent in patients with LVP before dialysis than in those without. The difference was statistically significant (p < 0.006); the incidence of arrhythmias was higher in patients with FE < 45% (p < 0.001). The majority of patients (95%) had left ventricular hypertrophy; only four (17%) had ischaemic heart disease too. It is highly probable that the presence of LVP in our patients can be attributed to hypertension and subsequent left ventricular hypertrophy. As patients with LVP at the end of dialysis had a greater incidence of arrhythmias than those without LVP, we suggest that this method could be useful as a first screening in dialysed patients.     

液闪效率示踪法校正效果的评价

本文评价了Aloka商品液闪仪效率示踪法dpm校正的效果。轻,中度猝灭校正效果理想,具有简便、实用和适用性广泛的特点。严重化学和颜色猝灭样品的校正结果分别随猝灭增加而向增大和减小的方向偏离,形成喇叭状曲线,文中对这一现象给出初步解释。     

OTDM transmitter using WDM-TDM conversion with an electroabsorptionwavelength converter

An all-optical multiplexing technique using wavelength division multiplexing (WDM)-time division multiplexing (TDM) conversion with an electroabsorption wavelength converter has been proposed and demonstrated. The effectiveness of this WDM-TDM conversion technique for various pulsewidth settings was experimentally investigated. The fluctuation of the signal performance, which was inevitably caused by the coherent crosstalk between adjacent pulses in the conventional optical time division multiplexing (OTDM) technique, were successfully suppressed, even in the case of wide pulse duration. High Q-factor performance has been maintained for a wide range of duty ration from 36% to 74%. By introducing this technique to the optical time division multiplexer, a highly stable and high-quality 40-Gb/s optical signal can be effectively produced without generating the short pulse or setting two tributaries at orthogonal polarization states, and without introducing high-speed electronics for signal multiplexing. The WDM-TDM conversion with an electroabsorption wavelength converter was extended to 60-Gb/s operation by using three 20-Gb/s tributaries. A clear eye opening was confirmed for a waveform after the WDM-TDM conversion of the 60-Gb/s signal     

Synthesis, Characterization, and Formation Process of Na-X Zeolite from Coal Fly Ash

Using the SiO₂ and Al₂O₃ components of the amorphous phase in coal fly ash (Fa), Fa was converted to Na-X zeolites in NaOH-NaAlO₂ solutions by stirring at 35°C for 72 hr and then aging at 85°C for a given period. The molar ratio SiO₂/Al₂O₃ of the starting materials was controlled from 2.0 to 13.2. The resulting materials were characterized by various means. Increasing the SiO₂/Al₂O₃ ratio of the starting material increased the degree of crystallinity of faujasite, exhibiting a maximum at SiO₂/Al₂O₃ = 8.0. The faujasite formed was identified as Na-X zeolite with Si/Al = 1.20. The amorphous phase in Fa was dissolved during the stirring to form a precursor of zeolite, such as amorphous aluminosilicate. The Na-X zeolite was formed by aging for 24 hr, and the degree of crystallinity of this material was increased with the increasing aging period. The cation exchange capacity and specific surface area were increased with the increasing degree of crystallinity of the Na-X zeolites.     

A pseudoaneurysm after repair of thoraco-abdominal aortic aneurysm

We report a 63-year-old female patient developing a pseudoaneurysm three years after patch-plasty of an aneurysm located at the distal thoracic aorta. Redo-operation was performed including total replacement of the descending thoracic aorta with reimplantation of distal intercostal arteries using small-caliber interposition grafts. This case presentation underlines the ineffectiveness of patch repair for the treatment of aortic aneurysms. Furthermore, the surgical technique of reimplantation of intercostal arteries using a separate graft is discussed.     

Fracture toughness evaluation of adjacent flow weld line in polystyrene by the SENB method

Fracture toughness of adjacent flow weld lines, defined as weld lines that occur when two flow fronts meet and continue to flow together in the same direction (meld line or hot weld line), was evaluated by the single‐edge notched‐bend (SENB) method using three differently‐shaped obstructive pins. Although the fracture toughness varied depending upon the shapes of the pin, the values could be standardized as the distance from the meeting point of the two flow fronts flowing around the pin. The fracture toughness decreased drastically from the meeting point along the weld line and then slightly increased. These characteristic features could be explained by flow‐induced molecular orientation at the weld line interface. The molecules around the meeting point that were initially oriented parallel to the weld line due to fountain flow were able to relax, and then entanglement across the weld line interface developed because the flow stopped in the middle of the filling process, resulting in high fracture toughness. In contrast, the material at the downstream side of the weld line continued flowing during the filling process, being stretched along the flow direction. So, the molecular orientation at this area could not relax. In addition, the V‐notch shape, i.e., the depth and length at the surface of the weld line, which also varied depending on the shape of the obstacles, was considered to be identical when the meeting point was allowed to be a datum point. Thus, the meeting point was found to be a significant factor when the properties of weld lines are investigated. POLYM. ENG. SCI., 45:1059–1066, 2005. © 2005 Society of Plastics Engineers     

Wideband and compact folded loop antenna

A simple and successful design method that yields a wideband and compact antenna without a ground plane is proposed. The antenna, referred to as the folded loop antenna, can, with the right parameters, achieve wideband characteristics. Calculated and measured results agree well and more than 50% bandwidth (return loss /spl les/-10 dB) is obtained.     

Theoretical model for flash generation

Reduction of flash generated in a gas vent is of great concern for manufacturers of electronic parts. The present study proposes a theoretical model for flash generation through consideration of flow characteristics in a gas vent. The model predicts the factors controlling flash, i.e., material parameters such as zero‐shear viscosity, crystallization temperature, thermal conductivity, and heat capacity, and process parameters such as injection and mold wall temperatures, packing pressure, and the clearance of a gas vent. On the other hand, we measure the amount of flash generated in the molding of poly(phenylene sulfide) (PPS) composites containing glass fiber and spherical fillers (CaCO₃ or Al₂O₃). Flash reduces with decreasing size of spherical fillers. These experimental data are successfully interpreted using the flash model. Polym. Eng. Sci., 45:198–206, 2005. © 2005 Society of Plastics Engineers