Effects of phenol on the properties of pitch produced thermally from the petroleum vacuum residue

A petroleum vacuum residue was thermally treated at 430 °C, with continuous addition of phenol to either the vapour phase or the liquid phase of the reacting system. Addition of phenol to the vapour phase increased the yield of the cracked oil and the fixed carbon of the residual pitch. When phenol was charged to the liquid phase, the yield of the oil remained unchanged, but the amount of the benzeneinsoluble matter in the pitch decreased, probably owing to the inhibition by phenol of the polymerization-condensation reactions of aromatic compounds. In both additions the cracked oil had a higher boiling point than that produced without phenol. Substitution of phenol with methyl groups increased the extent of cracking and coking properties (Roga Index) of the pitch. The effective order of phenol and its derivatives is: Phenol < m-Cresol < o-Cresol < p-Cresol < 2, 4-Dimethylphenol < 2, 6-Dimethylphenol < 2, 4, 6-Trimethylphenol Polyhydric phenol, e.g. catechol, and naphthol also enhanced the cracking reactivity of the residue.     

Secondary ion emission from beryllium surfaces by Ar and /or (Ar+D2) mixed ion bombardments

With respect to the impurity emission and erosion of a Be first wall, a secondary ion mass spectrometric investigation was carried out along with surface characterization with X-ray photoelectron spectroscopy. It was found that Be is emitted as distinct types of chemical forms from the surface owing to sputtering with Ar⁺ and an (Ar⁺+ D⁺₂) mixture: (i) Be and Be-cluster, (ii) oxide and hydroxide, and (iii) hydride and/or deuteride.     

Geometrical Characteristics and Surface Polarity of Inclined Crystallographic Planes of the Wurtzite and Zincblende Structures

Inclined crystallographic planes of the wurtzite structure were investigated in comparison with the zincblende structure in terms of surface geometry characteristics. The ball–stick model indicates that the semipolar surface possesses a surface polarity resembling the anion polarity, which agrees with the common experimental observations of epitaxial growth preference for the cation-polarity surface over the surface. The wurtzite surface was found to share geometrical similarities with the zincblende {100} surface uniquely among the possible semipolar planes. This finding encourages epitaxial growth on the plane of wurtzite semiconductors, e.g., GaN, with the potential of avoiding atomic step formations typically associated with off-axis crystallographic planes.     

<Emphasis Type="Italic">In Situ</Emphasis> Study of Reduction Process of CuO Paste and Its Effect on Bondability of Cu-to-Cu Joints

A bonding method utilizing redox reactions of metallic oxide microparticles achieves metal-to-metal bonding in air, which can be alternative to lead-rich high-melting point solder. However, it is known that the degree of the reduction of metallic oxide microparticles have an influence on the joint strength using this bonding method. In this paper, the reduction behavior of CuO paste and its effect on Cu-to-Cu joints were investigated through simultaneous microstructure-related x-ray diffraction and differential scanning calorimetry measurements. The CuO microparticles in the paste were gradually reduced to submicron Cu₂O particles at 210–250°C. Subsequently, Cu nanoparticles were generated instantaneously at 300–315°C. There was a marked difference in the strengths of the joints formed at 300°C and 350°C. Thus, the Cu nanoparticles play a critical role in sintering-based bonding using CuO paste. Furthermore, once the Cu nanoparticles have formed, the joint strength increases with higher bonding temperature (from 350°C to 500°C) and pressure (5–15 MPa), which can exceed the strength of Pb-5Sn solder at higher temperature and pressure.     

Evaluation of the impact of bioaugmentation and biostimulation by in situ hybridization and microelectrode

Three rotating disk biofilm reactors were operated to evaluate whether bioaugmentation and biostimulation can be used to improve the start-up of microbial nitrification. The first reactor was bioaugmented during start-up period with an enrichment culture of nitrifying bacteria, the second reactor received a synthetic medium containing NH(4)(+) and NO(2)(-) to facilitate concomitant proliferation of ammonia- and nitrite-oxidizing bacteria, and the third reactor was used as a control. To evaluate the effectiveness of bioaugmentation and biostimulation approaches, time-dependent developments of nitrifying bacterial community and in situ nitrifying activity in biofilms were monitored by fluorescence in situ hybridization (FISH) technique and microelectrode measurements of NH(4)(+), NO(2)(-), NO(3)(-), and O(2). In situ hybridization results revealed that addition of the enrichment culture of nitrifying bacteria significantly facilitated development of dense nitrifying bacterial populations in the biofilm shortly after, which led to a rapid start-up and enhancement of in situ nitrification activity. The inoculated bacteria could proliferate and/or survive in the biofilm. In addition, the addition of nitrifying bacteria increased the abundance of nitrifying bacteria in the surface of the biofilm, resulting in the higher nitrification rate. On the other hand, the addition of 2.1mM NO(2)(-) did not stimulate the growth of nitrite-oxidizing bacteria and did inhibit the proliferation of ammonia-oxidizing bacteria instead. Thus, the start-up of NO(2)(-) oxidation was unchanged, and the start-up of NH(4)(+) oxidation was delayed. In all the three biofilm reactors, data sets of time series analyses on population dynamics of nitrifying bacteria determined by FISH, in situ nitrifying activities determined by microelectrode measurements, and the reactor performances revealed an approximate agreement between the appearance of nitrifying bacteria and the initiation of nitrification activity, suggesting that the combination of these techniques was a very powerful monitoring tool to evaluate the effectiveness of bioaugmentation and biostimulation strategies.     

In situ bioremediation of a cis-dichloroethylene-contaminated aquifer utilizing methane-rich groundwater from an uncontaminated aquifer

At a trichloroethylene (TCE)-contaminated site in Chikura, Chiba, Japan, TCE had spread over to the first and second aquifers over years. After 8 years of pumping and treatment, finally derivative of TCE, cis-dichloroethylene (c-DCE) remained only in the second aquifer. In this study, feasibility of a low cost in situ bioremediation utilizing groundwater of the third aquifer, which contained natural dissolved methane possibly derived from natural gas field nearby, to stimulate methane-oxidizing bacteria was examined. In vitro experiment showed that a mixture of the groundwater from the second and third aquifers stimulated a growth of methane oxidizing bacteria and enhanced c-DCE degradation. The groundwater of the third aquifer was introduced into the second aquifer in situ. The population of methanotrophs with high V(max) and K(m) for methane uptake increased, resulting in successful degradation of c-DCE at a monitoring well 2m downgradient of the injection well.     

Changes in dietary bioaccumulation of tributyltin chloride (TBTCl) in red sea bream (Pagrus major) with the concentration in feed

The effect of the concentration of tributyltin (TBT) in feed on the dietary bioaccumulation of tributyltin chloride (TBTCl) was studied in an 8-week uptake experiment and a 4-week elimination experiment using red sea bream (Pagrus major). The biomagnification factor (BMF) and the assimilation efficiency (AE) decreased from 0.30 to 0.15 and from 13% to 5.9%, respectively, as the TBT concentration in feed increased from 1.3 to 20 microg/g. The elimination rate constant (k(2)) was independent of the TBT concentration in the fish. Laboratory measurements of the BMF and AE of TBTCl underestimate actual field values if highly contaminated feed is used. Judging from the BMF and AE, the risk of the bioaccumulation of TBTCl through the food chain might be smaller than that of polychlorinated biphenyls.     

Adaptive control of maximum thermal stress in a smart piezocomposite disk

In this paper, an adaptive control problem of the maximum thermal stress in a smart composite disk is analyzed. The disk consists of a transversely isotropic structural layer onto which piezoelectric sensor and actuator layers are bonded. It is considered that an unknown heating temperature distribution acts on the structural layer and a thermally induced voltage distribution is measured on the sensor layer. The unknown heating temperature distribution is inferred from the knowledge of the measured voltage distribution. Applied voltages to electrodes arranged on every actuator layer are determined by optimization so that the maximum thermal stress in the structural layer is minimized and stress constraints imposed on the piezoelectric layers are satisfied. Finally, the suppression ratio of the maximum thermal stress is discussed based on numerical results.     

Determination of potent antisense oligonucleotides in vitro by semiempirical rules

The selection of effective antisense target sites on a given mRNA molecule is a major problem in the detection of target mRNA in oligonucleotide arrays. In general, antisense oligodeoxynucleotides (asODNs) of about 10-20 nucleotides (nt) in length are used. However, the demand for predicting the sequence of potent asODNs much longer than those mentioned above has been increasing. Here, we prepared 40-nt asODNs directed against fluorescence-labeled green fluorescent protein (GFP) mRNA and quantified their hybridization efficiencies by fluorescence microscopy. We found that the hybridization efficiency depended on the TC content or the minimum free energy of the asODNs. On the basis of these findings, a semiempirical parameter called accessibility score was introduced to predict the potency of asODNs. The results of this study aided in the development of an effective two-step procedure for determining mRNA accessibility, namely, the computer-aided selection of asODN binding sites using an accessibility score followed by an experimental procedure for measuring the hybridization efficiencies between the selected asODNs and the target mRNA by fluorescence microscopy.