Production and properties of phytase and acid phosphatase from a sake koji mold, Aspergillus oryzae

We identified three types of acid phosphatase (ACP-I, ACP-II, and ACP-III) produced by Aspergillus oryzae in a submerged culture using only phytic acid as the phosphorous substrate. The optimum pH for the activities of the three enzymes was in the range of 4.5 to 5.5. Analysis of the substrate specificities of these enzymes revealed that ACP-I and ACP-III were acid phosphatases, and ACP-II was a phytase. These enzymes were produced during different periods of mycelial growth: ACP-II was produced during the early phase of cultivation (around 24 h), and ACP-I was produced between 24 to 72 h. ACP-III was detected after the production of ACP-I and ACP-II had ceased. The release of phosphate from phytic acid was expected to be due to the cooperative hydrolysis of these enzymes.     

Triple‐junction effect and its electric field relaxation in three dielectrics

This paper analyzes the electric field distribution near a wedge‐like edge in arrangements consisting of three dielectrics using analytical and numerical methods. The electric potential behaves exponentially as rⁿ (r is the distance from the edge) near the edge, leading to an infinitely high field with decreasing r for all cases. The value of the analytically derived exponent n agreed well with that obtained from the numerical field calculations. It has also been demonstrated that rounded contact of the spacer with a zero contact angle can make the electric field constant without showing an exponential rise near the edge. © 2009 Wiley Periodicals, Inc. Electr Eng Jpn, 167(1): 1– 8, 2009; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20670     

Optimal growth procedure of GaInP/GaAs heterostructure for high-efficiency solar cells

We have developed an optimal growth procedure for gas-source MBE production of a GaInP/GaAs heterointerface. The interface quality is crucial to obtaining high-performance GaAs solar cells with a GaInP barrier layer because minority carrier lifetime depends strongly on the interface structure. In situ Reflective High-Energy Electron Diffraction (RHEED) observation during the growth across the GaInP/GaAs heterointerface revealed that the phosphorus atoms are replaced by arsenic atoms in the near-interface region of the GaInP layer, and a transient layer acting as a carrier trap is formed. Introduction of a GaP layer into the interface was found to be effective in suppressing carrier loss. From Composition Analysis by Thickness Fringe-Transmission Electron Microscopy (CAT-TEM) images, it was also found that the optimum thickness of inserted GaP to avoid the generation of misfit dislocations is 1 nm.     

Preparation of a Translucent, Conductive, Porous Nanocomposite

A translucent, conductive, porous nanocomposite was designed and prepared by depositing SnO₂ on the inner surfaces of the pores of a porous glass plate and on its outer surface using a chemical vapor deposition method. The porous nanocomposite almost maintained its large surface area and pore volume because the pores remained open after they were deposited with SnO₂. Conductivity between the two outer surfaces of the nanocomposite plate was confirmed for the first time.     

Binding of antibiotics to glycoproteins of the vitelline and fertilization envelopes of cherry salmon eggs

The binding of antibiotics (gentamicin, oleandomycin and chloramphenicol) to vitelline and fertilization envelopes and their extracts was investigated by immunohistochemical and immunocytochemical techniques and immunoblot analysis using mature and artificially activated eggs of the fish Oncorhynchus masou. Binding of antibiotics was detected in the vitelline and fertilization envelope outermost layers, the fertilization envelope inner surface and cortical alveolus exudates, with differences in immunoreactive intensity and deposition. The fertilization envelope outermost layer had the capacity to bind much greater amounts of the antibiotics than the vitelline envelope outermost layer. The greater capacity was caused by the deposition of cortical alveolus exudates, which were known to be responsible for functional roles of protection against bacteria, fungi and noxious materials. Treatment of the vitelline and fertilization envelopes with neuraminidase markedly reduced the binding of gentamicin and chloramphenicol but slightly increased that of oleandomycin; binding of the latter to the vitelline and fertilization envelope outermost layers was considerably reduced after treatment with alpha-fucosidase. Treatment of the two envelopes with alpha-mannosidase, beta-galactosidase or beta-D-glucosaminidase did not cause any alteration in immunoreactive intensity or number of immunoreactive deposits. Immunoblot analysis of the vitelline or fertilization envelope extracts indicated that many of the antibiotic-binding substances were glycoproteins, and several major bands were bound by all three antibiotics. These results suggest that the vitelline or fertilization envelopes may have the ability to protect the egg itself, or the embryo, respectively, by trapping antibiotics, and the trapping may be related to the presence of carbohydrate moieties, such as sialyl or fucosyl residues.     

Pervaporation separation of water/ethanol mixtures through polysaccharide membranes. II. The permselectivity of chitosan membrane

The separation of water/alcohol mixtures through chitosan membrane was investigated. The degree of the deacetylation of chitosan did not affect the selectivity of the membrane in the separation of the water/ethanol mixture. The selectivity of the chitosan membrane was affected by the specific salts such as CoSO₄, ZnSO₄, and MnSO₄ and it increased when the salts were present in the feed mixture or the membrane was pretreated with the salt solution. This behavior would be explained by the contraction of the “holes” produced by the thermal motion of polymer chains and this contraction would be correlated with the conformation change of chitosan molecule due to the formation of complexes with metal ions.     

Preparation of fine polymer particles containing metallocene derivatives

This article deals with preparations of fine particles of metallocene copolymers by emulsifierfree emulsion polymerization of vinylferrocene (VFc), ferrocenylmethyl methacrylate (FMMA), 1-ferrocenylethyl methacrylate (1-FEMA), 2-ferrocenylethyl methacrylate (2-FEMA), and 1-ruthenocenylethyl methacrylate (1-REMA) with acrylonitrile (AN), styrene (St), and methyl methacrylate (MMA) in water/ethanol medium. As a result, spherical copolymer particles containing metallocene derivatives have been successfully synthesized in the particle size of ca. 120 to 600 nm. The contents of ferrocenyl or ruthenocenyl groups in copolymer particles increased with increasing concentration of charged metallocene derivatives, while the amounts of metallocene derivatives incorporated into particles are much lower than the charged ratio. © 1994 John Wiley & Sons, Inc.     

Development of bifacial PV cells for new applications of flat-plate modules

Bifacial cells have been developed for use in flat-plate static-concentrator modules and bifacial photovoltaic modules. All but one of the fabrication processes are conventional mass production processes, making it possible to produce these cells at low cost. By using 12.5×12.5 cm SOG wafers, bifacial cells with about 15% front- and 10.5% rear-illumination efficiencies have already been developed, and cells achieving higher efficiencies for both surfaces are being developed now. By applying these cells, a bifacial-cell-type flat-plate static-concentrator module showed 82% optical-collection efficiency for normal-incident light with a 2.0 concentration ratio. We have also applied bifacial cells for non-concentrating bifacial modules and developed a new application that reduces the limitations on PV module installation.     

Enhanced antiviral activity of soybean β-conglycinin-derived peptides by acylation with saturated fatty acids

Abstract: Peptide mixtures prepared from soybean β‐conglycinin (7S‐peptides) were acylated with saturated fatty acids of different chain length (6C‐18C) in order to improve their antiviral activity against Feline calicivirus (FCV) strain F9 which is a typical norovirus surrogate. Among the fatty acids varieties, it was revealed that 7S‐peptides acylated with myristic and palmitic acids potently inhibited FCV replication. Myristorylation and palmitoylation of 7S‐peptides kept host cells viability at 91.51% and 98.90%, respectively. The infectivity of FCV on Crandell–Reese feline kidney cells was further determined after exposure of initial titer of 10^6.47 TCID₅₀/mL. Myristoylated and palmitoylated 7S‐peptides significantly (P < 0.006) reduced FCV infectivity as compared to native 7S‐peptides. Native 7S‐peptides showed 25% FCV inhibitory activity while myristoylated and palmitoylated 7S‐peptides exhibited 98.59% and 99.98% reduction in FCV infectivity, respectively. Myristoylated and palmitoylated 7S‐peptides demonstrated higher anti‐FCV activity in a wide range of concentration with complete reduction at 25 μg/mL. Surface hydrophobicity was significantly (P < 0.05) increased after attachment of long hydrocarbon fatty acids to 7S‐peptides as supported by changes in fluorescence intensity. Enzymatic hydrolysis together with acylation will give an insight into surface and physiological functional lipopeptides derived from soy β‐conglycinin.