Ultra-shallow p-junction formation in silicon by excimer laser doping: a heat and mass transfer perspective

Heat and mass transfer at the nanosecond time scale and the nanometer length scale in pulsed laser fabrication of ultra-shallow p⁺-junctions is studied in this work. A new technique is developed to fabricate the ultra-shallow p⁺-junctions with pulsed laser doping of crystalline silicon with a solid spin-on-glass (SOG) dopant, through the nanosecond pulsed laser heating, melting, and boron mass diffusion in the 100 nm thin silicon layer close to the surface. High boron concentration of 10²⁰ atoms cc⁻¹ and the ‘box-like’ junction profile are achieved. The key mechanism determining the ‘box-like’ junction shape is found to be the melt-solid interface limited diffusion. The ultra-shallow p⁺-junctions with the depth from 30 to 400 nm are successfully made by the excimer laser. The optimal laser fluence condition for SOG doping is found about 0.6–0.8 J cm⁻² by studying the ultra-shallow p⁺-junction boron profiles measured by the secondary ion mass spectroscopy (SIMS) vs the laser fluence and the pulse number. The one-dimensional numerical analysis agrees reasonably with the experiment, within the available physical picture. Possible mechanisms such as boron diffusivity dependence on the dopant concentration in the molten silicon are proposed.     

Exceptional convergent evolution in a virus

Replicate lineages of the bacteriophage phiX 174 adapted to growth at high temperature on either of two hosts exhibited high rates of identical, independent substitutions. Typically, a dozen or more substitutions accumulated in the 5.4-kilobase genome during propagation. Across the entire data set of nine lineages, 119 independent substitutions occurred at 68 nucleotide sites. Over half of these substitutions, accounting for one third of the sites, were identical with substitutions in other lineages. Some convergent substitutions were specific to the host used for phage propagation, but others occurred across both hosts. Continued adaptation of an evolved phage at high temperature, but on the other host, led to additional changes that included reversions of previous substitutions. Phylogenetic reconstruction using the complete genome sequence not only failed to recover the correct evolutionary history because of these convergent changes, but the true history was rejected as being a significantly inferior fit to the data. Replicate lineages subjected to similar environmental challenges showed similar rates of substitution and similar rates of fitness improvement across corresponding times of adaptation. Substitution rates and fitness improvements were higher during the initial period of adaptation than during a later period, except when the host was changed.     

A comprehensive approach to the solution of direct-coupledmultislice model of skewed rotor induction motors using time-steppingeddy-current finite element method

Normally a complicated three-dimensional (3-D) approach is needed to study the field pattern of induction machines with skewed rotor bars. In this paper, a time-stepping two-dimensional (2-D) eddy-current finite element method, based on multislice technique, is described to study the steady-state operation and the starting process of skewed rotor induction machines. The fields of the multislices are being solved en bloc simultaneously, and thus, the effects of the eddy current and saturation can be taken into account directly. New forms of the governing equations for the multislice model are derived, which allow the meshes of multislices to be taken as one 2-D mesh so that the algorithm is very similar to that of general 2-D problems. Special techniques required for the mesh generation in the multislice model and the salient structures of the software are also described. The results obtained by using the program being developed have very good correlation with test data     

Preparation of core–shell type nanoparticles of diblock copolymers of poly(L‐lactide)/poly(ethylene glycol) and their characterization in vitro

Core–shell type nanoparticles of poly(L ‐lactide)/poly(ethylene glycol) (LE) diblock copolymer were prepared by a dialysis technique. Their size was confirmed as 40–70 nm using photon correlation spectroscopy. The ¹H‐NMR analysis confirmed the formation of core–shell type nanoparticles and drug loading. The particle size, drug loading, and drug release rate of the LE nanoparticles were slightly changed by the initial solvents that were used. The drug release behavior of LE core–shell type nanoparticles showed an initial burst during the first 12 h and then a sustained release until 100 h. The degradation behavior of LE block copolymer nanoparticles was divided into three phases: the initial rapid degradation phase, the stationary phase, and the rapid degradation phase until complete degradation. It was suggested that lidocaine release kinetics were predominantly governed by the diffusion mechanism in the initial burst phase and after that by both of the diffusion and degradation mechanisms. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 85: 2625–2634, 2002     

Prospective study of effect of switching from cigarettes to pipes or cigars on mortality from three smoking related diseases

OBJECTIVE: To estimate the extent to which cigarette smokers who switch to cigars or pipes alter their risk of dying of three-smoking related diseases-lung cancer, ischaemic heart disease, and chronic obstructive lung disease. DESIGN: A prospective study of 21520 men aged 35-64 years when recruited in 1975-82 with detailed history of smoking and measurement of carboxyhaemoglobin. MAIN OUTCOME MEASURES: Notification of deaths (to 1993) classified by cause. RESULTS: Pipe and cigar smokers who had switched from cigarettes over 20 years before entry to the study smoked less tobacco than cigarette smokers (8.1 g/day v 20 g/day), but they had the same consumption as pipe and cigar smokers who had never smoked cigarettes (8.1 g) and had higher carboxyhaemoglobin saturations (1.2% v 1.0%, P < 0.001), indicating that they inhaled tobacco smoke to a greater extent. They had a 51% higher risk of dying of the three smoking related diseases than pipe or cigar smokers who had never smoked cigarettes (relative risk 1.51; 95% confidence interval 0.96 to 2.38), a 68% higher risk than lifelong non-smokers (1.68; 1.16 to 2.45), a 57% higher risk than former cigarette smokers who gave up smoking over 20 years before entry (1.57; 1.04 to 2.38), and a 46% lower risk than continuing cigarette smokers (0.54; 0.38 to 0.77). CONCLUSION: Cigarette smokers who have difficulty in giving up smoking altogether are better off changing to cigars or pipes than continuing to smoke cigarettes. Much of the effect is due to the reduction in the quantity of tobacco smoked, and some is due to inhaling less. Men who switch do not, however, achieve the lower risk of pipe and cigar smokers who have never smoked cigarettes. All pipe and cigar smokers have a greater risk of lung cancer than lifelong non-smokers or former smokers.     

Alcoholism at the time of injury among trauma center patients: Vehicular crash victims compared with other patients

A structured in-depth interview employing standardized criteria was used to determine the prevalence of lifetime and current alcohol dependence (alcoholism) in unselected consecutive patients admitted to a regional Level I trauma center. Of 629 patients, 157 (25.0%) were current alcoholics at the time of injury. An additional 87 (13.8%) were diagnosed as lifetime non-current alcoholics. There was no significant difference in the rates of current alcohol dependence among patients injured in vehicular crashes (23.5%), other unintentional trauma victims (29.3%), and those injured as a result of violence (24.6%). Of BAC + (blood alcohol concentration positive) patients, 54.5% were current alcoholics. However, 14.4% of alcohol-negative patients were also diagnosed as alcohol dependent.