Processing of wood plastic composites: The influence of feeding method and polymer melt flow rate on particle degradation

Spruce wood particle (WP)/polypropylene (PP) compounds were prepared in an internal mixer using different rotor speeds. To analyze the effect of feeding method on particle degradation, WP and PP were either fed as dry‐blend or WP was fed into the PP melt. To prevent melt freezing, pre‐heated WP were used as comparison to cold WP. In addition, WPs were compounded with different grades of PP or high‐density polyethylene (HDPE) to analyze the effect of polymer matrix melt flow rate (MFR) on particle degradation. Mixing behavior of compounds containing 30% and 70% (w/w) WP depended on feeding method, represented by a changing relation of final torque values. Feeding as dry‐blend and using pre‐heated particles led to stronger WP degradation. Degradation decreased with increasing polymer MFR. For PP compounds, particle degradation was stronger when containing 70% WP, for HDPE the difference due to WP content was only marginal. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43231.     

Synthesis and Biopharmaceutical Evaluation of Imatinib Analogues Featuring Unusual Structural Motifs

A convenient synthesis of imatinib, a potent inhibitor of ABL1 kinase and widely prescribed drug for the treatment of a variety of leukemias, was devised and applied to the construction of a series of novel imatinib analogues featuring a number of non‐aromatic structural motifs in place of the parent molecule's phenyl moiety. These analogues were subsequently evaluated for their biopharmaceutical properties (e.g., ABL1 kinase inhibitory activity, cytotoxicity). The bicyclo[1.1.1]pentane‐ and cubane‐containing analogues were found to possess higher themodynamic solubility, whereas cubane‐ and cyclohexyl‐containing analogues exhibited the highest inhibitory activity against ABL1 kinase and the most potent cytotoxicity values against cancer cell lines K562 and SUP‐B15. Molecular modeling was employed to rationalize the weak activity of the compounds against ABL1 kinase, and it is likely that the observed cytotoxicity of these agents arises through off‐target effects.     

Efficient Engineering and Production Concepts for Products in Regulated Environments – Dream or Nightmare?

Manufacturing of chemical‐pharmaceutical products is moving increasingly fast on a global scale. Therefore, developing and starting up production facilities fast, with high quality, and at reasonable costs has become extremely challenging. Engineering concepts like modularization, standardization and simultaneous/parallel engineering are discussed as methods for speeding up process design and filing for regulatory approval. Transfer from batch to continuous operation mode of production is pointed out as the key‐issue in such strategies.     

Effect of Constant‐Rate Reduction on the Performance of a Ternary Cu/ZnO/Al2O3 Catalyst in Methanol Synthesis

A multi‐functional flow set‐up was developed for the rate‐ and temperature‐controlled reduction of copper catalysts, their application in high‐pressure methanol synthesis and the determination of the copper surface area by N₂O frontal chromatography. The influence of constant‐rate reduction on the catalytic properties of a ternary Cu/ZnO/Al₂O₃ catalyst was investigated. The temperature during the constant‐rate reduction was found to decrease, indicating autocatalytic kinetics, but no significant catalytic effect of the milder reduction conditions was observed compared with a slow linear heating ramp.     

Schädigungsentwicklung der Legierung IN 738 LC bei Hochtemperatur-LCF-Beanspruchung

Damage evolution of the alloy IN 738 LC at high temperature low cycle fatigue Herrn Professor K.-T. Rie zum 60. Geburtstag Interrupted Low-Cycle-Fatigue tests have been carried out with IN 738 LC at 850°C. The specimens were extensively examined by SEM to quantify the evolution of fatigue damage. Surface crack nucleation at oxidized grain boundaries occured during the whole experiments. The coalescence of cracks was the dominant mechanism which lead to macro crack evolution and the final fracture.     

Transcriptome Analyses of Adipose Tissue Samples Identify EGFL6 as a Candidate Gene Involved in Obesity-Related Adipose Tissue Dysfunction in Children

Obesity develops early in childhood and is accompanied by early signs of adipose tissue (AT) dysfunction and metabolic disease in children. In order to analyse the molecular processes during obesity-related AT accumulation in children, we investigated genome-wide expression profiles in AT samples, isolated adipocytes, and stromal vascular fraction (SVF) cells and assessed their relation to obesity as well as biological and functional AT parameters. We detected alterations in gene expression associated with obesity and related parameters, i.e., BMI SDS, adipocyte size, macrophage infiltration, adiponectin, and/or leptin. While differential gene expression in AT and adipocytes shared an enrichment in metabolic pathways and pathways related to extracellular structural organisation, SVF cells showed an overrepresentation in inflammatory pathways. In adipocytes, we found the strongest positive association for epidermal growth factor-like protein 6 (EGFL6) with adipocyte hypertrophy. EGFL6 was also upregulated during in vitro adipocyte differentiation. In children, EGFL6 expression was positively correlated to parameters of AT dysfunction and metabolic disease such as macrophage infiltration into AT, hs-CRP, leptin levels, and HOMA-IR. In conclusion, we provide evidence for early alterations in AT gene expression related to AT dysfunction in children and identified EGFL6 as potentially being involved in processes underlying the pathogenesis of metabolic disease.     

Low-cost direct writing lithography system for the sub-micron range

Abstract

We have developed a fixed beam direct writing laser lithography system with a minimum feature size of 400nm at 457nm wavelength and a writing speed of 4·2mm/s with total system costs of less than 100 000 US$.     

Generalized juntas and NP-hard sets

We show that many NP-hard sets have heuristic polynomial-time algorithms with high probability weight of correctness with respect to generalizations of Procaccia and Rosenschein’s junta distributions.