Fluid Flow and Mixing in Non-Isothermal Water Model of Continuous Casting Tundish

Fluid flow and mixing of molten steel in a twin-slab-strand continuous casting tundish were investigated using a mixing model under non-isothermal conditions.This model led to a set of ordinary differential equations that were solved with a Runge-Kutta algorithm.Steady state water modeling was carried out under non-isothermal conditions.Experimental data obtained from the water model were used to calibrate the mixing model.Owing to the presence of a mixed convection in the non-isothermal conditions,a channelizing flow would be created in the fluid inside the tundish.A mixing model was designed that was capable of predicting RTD（residence time distribution）curves for different cases in non-isothermal conditions.The relationship between RTD parameters and the Tu（tundish Richardson number）was obtained for various cases under non-isothermal conditions.The results show that the RTD parameters were completely different under isothermal and non-isothermal conditions.The comparison of the RTD curves between the isothermal and non-isothermal conditions presents that the extent of mixing in the tundish in non-isothermal conditions is lower than the mixing extent in isothermal conditions.     

One-pot synthesis of hematite-alumina hollow sphere composite by ultrasonic spray pyrolysis technique with high adsorption capacity toward PAHs

A hybrid nanocomposite of alumina and hematite was synthesized by ultrasonic spray pyrolysis technique. The study of microscopic images, mapping analysis, and XRD patterns revealed that the Al₂O₃ – Fe₂O₃ nanocomposite was composed of separated spherical particles with a thin layer ball-shaped structure that metal oxides are uniformly distributed in the wall of hollow sphere particles, led to a coherent and monotonous construction. A series of coefficients of equilibrium sorption of polycyclic aromatic hydrocarbons (PAHs) as hazardous materials were measured on the prepared composite material in a batch technique. The free or pure Al₂O₃ or Fe₂O₃ showed negligible removal efficiency for the mentioned analytes. The various significant variables, such as initial analyte concentration, solution pH, adsorbent dose, and contact time to remove analyte, were studied in the aqueous solutions. Adsorption data were modeled to Langmuir, Freundlich, and Temkin isotherms, and a good correlation found in the case of Langmuir isotherm and adsorption capacity for anthracene, phenanthrene, and naphthalene were 370, 333, and 322 mg g^?1, respectively. Investigation of the kinetic models proved a pseudo-second-order, and the prepared adsorbent can be reused more than 7 times without a significant decrease of adsorption performance.     

A cross‐cultural comparison of colour emotion for two‐colour combinations

Psychophysical experiments were conducted in the UK, Taiwan, France, Germany, Spain, Sweden, Argentina, and Iran to assess colour emotion for two‐colour combinations using semantic scales warm/cool, heavy/light, active/passive, and like/dislike. A total of 223 observers participated, each presented with 190 colour pairs as the stimuli, shown individually on a cathode ray tube display. The results show consistent responses across cultures only for warm/cool, heavy/light, and active/passive. The like/dislike scale, however, showed some differences between the observer groups, in particular between the Argentinian responses and those obtained from the other observers. Factor analysis reveals that the Argentinian observers preferred passive colour pairs to active ones more than the other observers. In addition to the cultural difference in like/dislike, the experimental results show some effects of gender, professional background (design vs. nondesign), and age. Female observers were found to prefer colour pairs with high‐lightness or low‐chroma values more than their male counterparts. Observers with a design background liked low‐chroma colour pairs or those containing colours of similar hue more than nondesign observers. Older observers liked colour pairs with high‐lightness or high‐chroma values more than young observers did. Based on the findings, a two‐level theory of colour emotion is proposed, in which warm/cool, heavy/light, and active/passive are identified as the reactive‐level responses and like/dislike the reflective‐level response. © 2010 Wiley Periodicals, Inc. Col Res Appl, 2012     

Fast evolving neuro-fuzzy model and its application in online classification and time series prediction

A strategy for improving speed of the previously proposed evolving neuro-fuzzy model (ENFM) is presented in this paper to make it more appropriate for online applications. By considering a recursive extension of Gath?CGeva clustering, the ENFM takes advantage of elliptical clusters for defining validity region of its neurons which leads to better modeling with less number of neurons. But this necessitates the computing of reverse and determinant of the covariance matrices which are time consuming in online applications with large number of input variables. In this paper a strategy for recursive estimation of singular value decomposition components of covariance matrices is proposed which converts the burdensome computations to calculating reverse and determinant of a diagonal matrix while keeping the advantages of elliptical clusters. The proposed method is applied to online detection of epileptic seizures in addition to prediction of Mackey?CGlass time series and modeling a time varying heat exchanger. Simulation results show that required time for training and test of fast ENFM is far less than its basic model. Moreover its modeling ability is similar to the ENFM which is superior to other online modeling approaches.     

Energy production trend in Iran and its effect on sustainable development

The purpose of this study is to review the energy production trend from different energy resources in recent decades and its effect on sustainable energy production as one of the basic axis of sustainable development in Iran.Ninety nine percent of energy production in Iran comes from oil & gas and only 1% from renewable energy resources. Since Iran has very rich fossil energy resources, little attention has been paid to explore alternative ways of energy production. Majority of country's income is from oil & gas which put extra pressure on its natural resources. Continuing with the existing trend may lead to a path away from the goals of sustainable development, set for the country. Therefore, the sustainability study should be of interest to decision-makers.     

Synthesis,characterization and investigation of the electrochemical hydrogen storage properties of CuO–CeO2 nanocomposites synthesized by green method

Pure CuO–CeO₂ nanocomposites were synthesized by simple thermal decomposition method in presence of various Cu salts as a copper source and fructose as a green capping agent. In this study, the effect of various parameters such as the type of copper sources, temperature and time of reaction on the morphology and the particles size were studied. The products were characterized via X-ray diffraction (XRD) pattern, scanning electron microscopy (SEM), energy dispersive X-ray analysis (EDX), transmission electron microscopy (TEM), N2 adsorption (BET), vibrating sample magnetometer (VSM), and infrared spectrum (FT-IR). The optical property of the nanocomposite was examined via UV–vis (DRS) spectroscopy and the band gap was calculated to 3 eV. Also, the hydrogen storage capacity of CuO–CeO₂ nanocomposites and CeO₂ nanoparticles were investigated via chronopotentiometry method for the first time. The discharge capacity of CeO₂ nanoparticles and CuO–CeO₂ nanocomposites in 1 mA current and 20 cycles obtained 2150 and 2450 mAh/g, respectively.     

A quantitative approach to study solid state phase coarsening in solder alloys using combined phase-field modeling and experimental observation

In the present work, a quantitative phase-field approach is introduced to study the phase-coarsening phenomena in solder alloys, Pb-Sn alloy here. The most important part of this work is to introduce a simple and versatile approach to quantify the experimental and simulation data, without putting into difficulties corresponding to the stochastic nature of phenomenon, in order to compute unknown physical data required to perform numerical simulation. For this purpose, at first, the evolution of microstructure vs. time is studied experimentally by the conventional optical microscopy. Then, unknown physical data, the interface mobility here, is computed by fitting the time evolution of the total interface perimeter of the simulation results to that of the experimental data. In fact, by this approach, the physical data is computed such that it will be applied to predict reality in the subsequent simulations, i.e., the presented method can be accounted as the calibration of the corresponding mathematical model and numerical method. The validity of the presented approach is supported by comparing simulation data to experimental ones.