Improving toughness of ultra-high molecular weight polyethylene with ionic liquid modified carbon nanofiber

Ionic liquids (ILs) with long alkyl substituted groups, including 1-docosanyl-3-methylimidazolium bromide (IL-1) and 1-docosanyl-3-methylimidazolium hexafluorophosphate (IL-2), were synthesized and used to modify the surface of carbon nanofibers (CNF). The nanocomposite film prepared by solution-blending of ionic liquid modified CNF (i-CNF) and ultrahigh molecular weight polyethylene (UHMWPE) displayed better toughness when compared with pure UHMWPE even at very low concentrations (e.g. 0.4 wt%). The effect of ionic liquids on the elongation-to-break ratio of this nanocomposite system was investigated. The ionic liquid with hexafluorophosphate as the anion was more efficient to increase the toughness of UHMWPE due to the improved compatibility of IL with UHMWPE in the polymer matrix than that of the bromide. The rheological behavior of molten nanocomposites revealed that the storage modulus and the complex viscosity decreased with increasing ionic liquid content in the high frequency region. However, a reverse trend was observed when the frequency was less than 0.05 s⁻¹. In-situ monitoring in the change of crystallinity of the nanocomposite during tensile deformation suggested a mechanism of sliding between UHMWPE crystal regions and the surface of carbon nanofibers.     

Thiol-modified cellulose nanofibrous composite membranes for chromium (VI) and lead (II) adsorption

Oxidized cellulose nanofibers (CNF), embedded in an electrospun polyacrylonitrile (PAN) nanofibrous scaffold, were grafted with cysteine to increase the adsorption capability for chromium (VI) and lead (II). Thiol-modified cellulose nanofibers (m-CNF) were characterized by titration, FT-IR, energy dispersive spectroscopy (EDS) and SEM techniques. Static and dynamic Cr(VI) and Pb(II) adsorption studies of m-CNF nanofibrous composite membranes were carried out as a function of pH and of contact time. The results indicated these membranes exhibited high adsorption capacities for both Cr(VI) (87.5 mg/g) and Pb(II) (137.7 mg/g) due to the large surface area and high concentration of thiol groups (0.9 mmol of –SH/gram m-CNF). The morphology and property of m-CNF nanofibrous composite membranes was found to be stable, and they could be used and regenerated multiple times with high recovery efficiency.     

Synthesis and electrochromic properties of aromatic polyimides bearing pendent triphenylamine units

A series of aromatic polyimides with pendent triphenylamine group were synthesized from equimolar mixtures of 4,4′-oxydianiline (ODA) and 4-(3,5-diaminobenzamido)triphenylamine (4), 4-(3,5-diaminobenzamido)-4′,4″-di-tert-butyltriphenylamine (t-Bu-4) or 4-(3,5-diaminobenzamido)-4′,4″-dimethoxytriphenylamine (MeO-4) with two aromatic tetracarboxylic dianhydrides (DSDA or 6FDA) via a conventional two-step procedure that included a ring-opening polyaddition to give poly(amic acid)s, followed by chemical imidization. These polyimides exhibited good solubility in polar organic solvents and could be solution-cast into flexible and strong films. They showed excellent thermal stability, with T_g values in the range of 284–309 °C. The polyimides derived from diamines t-Bu-4 and MeO-4 exhibited reversible electrochemical oxidation, accompanied by strong color changes with high contrast ratio and electrochromic stability. For the polyimides derived from diamine 4, the coupling reaction between the triphenylamine radical cations occurred during the oxidative process forming a tetraphenylbenzidine structure, which resulted in an additional oxidation state and color change together with enhanced near-IR absorption at fully oxidized state.     

Electrochemical Performance of PrBaCo2O5+δ and Sm0.5Sr0.5CoO3−δ Infiltrated Ce0.9Gd0.1O1.95 Cathodes

Cathodes with PrBaCo₂O_5+δ (PBC) and Sm_0.5Sr_0.5CoO_3−δ (SSC) infiltrated on Ce_0.9Gd_0.1O_1.95 (CGO) backbones are prepared using metal nitrates as precursors and ethanol as wetting agent. Electrochemical impedance spectra (EIS) are measured from cathode/CGO/cathode symmetrical cells in 400–650 °C under humidified air. The results indicate that interfacial area specific resistance (ASR) value decreases and then increases with infiltrate loading and minimum values occur at 50 wt.% loading (relative to sum of infiltrate and backbone) for both PBC and SSC infiltrates. ASR values of PBC infiltrated cathodes are lower than that of corresponding SSC infiltrated cathodes in general, and in particular ASR values as low as 1.36 × 10⁻² and 2.27 × 10⁻² Ω cm² are obtained at 650 °C in air for 50 wt.% PBC and 50 wt.% SSC infiltrated cathodes, respectively. Conductivity values of CGO electrolyte increase with infiltrate loading and agree with the reported values when the loading reaches 50 wt.%.     

Magnesium Modified β-Tricalcium Phosphate Induces Cell Osteogenic Differentiation In Vitro and Bone Regeneration In Vivo

In vitro, in vivo, and clinical studies have shown how the physicochemical and biological properties of β-tricalcium phosphate (β-TCP) work in bone regeneration. This study aimed to improve the properties of β-TCP by achieving optimum surface and bulk β-TCP chemical/physical properties through the hydrothermal addition of magnesium (Mg) and to later establish the biocompatibility of β-TCP/Mg for bone grafting and tissue engineering treatments. Multiple in vitro and in vivo analyses were used to complete β-TCP/Mg physicochemical and biological characterization. The addition of MgO brought about a modest rise in the number of β-TCP surface particles, indicating improvements in alkaline phosphatase (ALP) activity on day 21 (p < 0.05) and in the WST-1assay on all days (p < 0.05), with a corresponding increase in the upregulation of ALP and bone sialoprotein. SEM analyses stated that the surfaces of the β-TCP particles were not altered after the addition of Mg. Micro-CT and histomorphometric analysis from rabbit calvaria critical defects resulted in β-TCP/Mg managing to reform more new bone than the control defects and β-TCP control at 2, 6, and 8 weeks (* p ≤ 0.05, ** p ≤ 0.01, *** p ≤ 0.001, and **** p ≤ 0.0001). The hydrothermal addition of MgO to the β-TCP surfaces ameliorated its biocompatibility without altering its surface roughness resulting from the elemental composition while enhancing cell viability and proliferation, inducing more bone regeneration by osteoconduction in vivo and osteoblastic differentiation in vitro.     

FAK in Cancer: From Mechanisms to Therapeutic Strategies

Focal adhesion kinase (FAK), a non-receptor tyrosine kinase, is overexpressed and activated in many cancer types. FAK regulates diverse cellular processes, including growth factor signaling, cell cycle progression, cell survival, cell motility, angiogenesis, and the establishment of immunosuppressive tumor microenvironments through kinase-dependent and kinase-independent scaffolding functions in the cytoplasm and nucleus. Mounting evidence has indicated that targeting FAK, either alone or in combination with other agents, may represent a promising therapeutic strategy for various cancers. In this review, we summarize the mechanisms underlying FAK-mediated signaling networks during tumor development. We also summarize the recent progress of FAK-targeted small-molecule compounds for anticancer activity from preclinical and clinical evidence.     

Fabrication and Thermal Dissipation Properties of Carbon Nanofibers Derived from Electrospun Poly(Amic Acid) Carboxylate Salt Nanofibers

Polyimides (PIs) possess excellent mechanical properties, thermal stability, and chemical resistance and can be converted to carbon materials by thermal carbonization. The preparation of carbon nanomaterials by carbonizing PI‐based nanomaterials, however, has been less studied. In this work, the fabrication of PI nanofibers is investigated using electrospinning and their transformation to carbon nanofibers. Poly(amic acid) carboxylate salts (PAASs) solutions are first electrospun to form PAAS nanofibers. After the imidization and carbonization processes, PI and carbon nanofibers can then be obtained, respectively. The Raman spectra reveal that the carbon nanofibers are partially graphitized by the carbonization process. The diameters of the PI nanofibers are observed to be smaller than those of the PAAS nanofibers because of the formation of the more densely packed structures after the imidization processes; the diameters of the carbon nanofibers remain similar to those of the PI nanofibers after the carbonization process. The thermal dissipation behaviors of the PI and carbon nanofibers are also examined. The infrared images indicate that the transfer rates of thermal energy for the carbon nanofibers are higher than those for the PI nanofibers, due to the better thermal conductivity of carbon caused by the covalent sp² bonding between carbon atoms.     

Making reusable reaction-bonded silicon nitride crucibles for silicon casting from kerf-loss silicon waste

Silicon kerf loss during wafer slicing and the broken quartz crucibles after silicon casting are two major solid wastes from photovoltaic (PV) industry. Especially, the recycle of kerf-loss silicon has become an urgent issue because near 100 000 t of solid wastes are generated every year. One of the most meaningful recycle routes of the kerf-loss silicon is to make silicon nitride crucibles to replace the quartz crucibles. In this study, we demonstrated how this is feasible through acid leaching refining, slip casting, and nitridation. The reaction-bonded silicon nitride (RBSN) crucibles after oxidation were found pure enough for silicon ingot growth. More importantly, they could be reused after ingot growth. With the present examples, the potential of using the kerf-loss silicon for fine ceramics is prominent.     

Fabrication of cellulose nanofiber‐based ultrafiltration membranes by spray coating approach

Ultrafiltration membranes containing a cellulose nanofiber barrier layer were fabricated by the spray coating method, where the thickness and uniformity of the barrier layer were systematically investigated as a function of air pressure, flow rate and concentration of the cellulose nanofiber suspension. In specific, the surface morphology of the barrier layer was studied by scanning electron microscopy and its uniformity was examined by the fluorescence dye imaging method. The ultrafiltration performance of the membranes fabricated by the spray coating method was also compared with that of the membranes made by the knife coating approach using dextran molecules as probe, where the former consistently exhibited significantly higher permeation flux while remaining the same rejection ratio. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 44583.