A new model for the performance evaluation of synchronous circuitswitched multistage interconnection networks

Patel (1981) proposed a probabilistic approach to analyze the performance of synchronous multistage interconnection networks (MINs) based on a uniform reference model and the assumption of independent requests. Patel's model and analytical results have been widely adopted by numerous researchers as a basis to investigate various aspects of MINs. We study in detail the effects of the independence assumption on the accuracy of system performance and point out the factors which cause an inaccuracy. A new queueing model is then proposed and is shown to be very accurate. Since only six states are needed, independent of the size of MINs, this new model is very efficient computationally     

A high-throughput and high-capacity IPv6 routing lookup system

With the growing number of routing entries, IP routing lookup has become the major performance bottleneck in backbone routers. In this paper, a complete hardware-based routing lookup system is proposed to achieve high-throughput and high-capacity for IPv6. The proposed system is a cache-centric, hash-based architecture that contains a routing lookup application specific integrated circuit (ASIC) and a memory set. A hash function is used to reduce lookup time for the routing table and ternary content addressable memory (TCAM) effectively resolves the collision problem. The gate count of the ASIC, excluding the binary content addressable memory (BCAM), is about 5306 gates, using an in-house 0.18 μm CMOS single-poly six-metal standard cell library. The results of post-layout simulations show that the ASIC operates in 3.6 ns so that the routing lookup system approaches 260 Mega lookups per second (Mlps), which is sufficient for 100 Gbps networks. The memory density is good, with each routing entry requiring only 64 bits. Moreover, the routing table only needs 10.24 KB on-chip BCAM, 20.04 KB off-chip TCAM and 29.29 MB DRAM for 3.6 M routing entries in the proposed system.     

Supercritical CO2 extraction of phthalate plasticizers from PVC

Three common phthalates, namely, dioctyl phthalate, diisodecyl phthalate, and trioctyl trimellitate, were used as plasticizers for poly(vinyl chloride) (PVC) processing, and the extraction of these plasticizers were investigated using supercritical CO₂ fluids. Factors affecting the extractions of these phthalates were focused. The molecular weight of phthalates was found to dominate the level of extraction of low temperatures, whereas the content of carbonyl groups in the phthalate was a determining factor for the level of extraction of high temperatures. Negligible extraction was observed below the critical pressure of CO₂. For 32°C, the level of the extraction is insignificant below density of ca 0.7 g/cm³, above which the level of the extraction increases roughly linearly with increasing density. For temperatures above 32°C, the density of CO₂ for apparent extractions decreased with increasing temperatures. The threshold density of CO₂ for extractions was found to be independent of the amount of a given phthalate in PVC. Two extraction rates during the extraction could be determined, with a higher rate in the first hour followed by a lower rate later in the extraction for all three phthalates. The effects of the extractions of phthalates on the flexibility of PVC were also investigated as well as the effects of the extrusion conditions, which could lead to various degrees of plasticization of PVC, on the level of extractions. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 4032–4037, 2003     

Utility‐based probabilistic call admission control for complete fairness in wireless networks

Resource reservation or the other prioritization strategies adopted by Call Admission Control (CAC) schemes in wireless networks lead to unfair resource allocation to users belonging to different service classes (SCs) due to high divergence among the respective call blocking probabilities (CBPs). In this paper, we propose dynamic optimization of probabilistic CAC (P‐CAC) schemes to assure CAC fairness among users of different SCs in wireless networks. The approach is based on users utility combined with fairness optimization, aiming at dynamically determining the probability value in the P‐CAC scheme. This optimal probability is adjusted to network ongoing traffic, CBPs of each SC, prioritization levels characterizing the SCs supported, and the users risk aversion, which reflects their behavior toward the perceived QoS. The existence and uniqueness of the optimal probability that leads to absolute fairness among the users of a wireless network are proven. Copyright © 2012 John Wiley & Sons, Ltd.     

Characteristics of a fast transient outward current in guinea pig trigeminal motoneurons

A fast transient voltage dependent outward current (TOC) in trigeminal motoneurons (TMNs) was studied in guinea pig brainstem slices by use of sharp electrodes in combination with single electrode voltage clamp techniques. In solutions containing TTX, low Ca2+/Mn2+ and 20 mM TEA this current activated around -55 to -60 mV from holding potentials negative to resting potential, obtained its peak amplitude within 5 ms and decayed as a single exponential with a time constant of 6-8 ms. Half maximal values for inactivation and activation were -72 and -37 mV, respectively. Bath application of 5 mM 4-AP suppressed this current by approximately 90% and eliminated the early depolarizing transient membrane rectification observed in response to a constant depolarizing current pulse, prolonged the action potential duration, and reduced the threshold voltage and delay to onset of the action potential. It is suggested that this current resembles the typical A-current observed in many CNS neurons and, as a result of its voltage and time dependent properties, could contribute to control of motoneuronal discharge and timing of burst onset during rhythmical jaw movements. Therefore, any cellular models of masticatory activity should include the properties of this current.     

Effects of 3‐D microwell culture on initial fate specification in human embryonic stem cells

Several studies have demonstrated that three‐dimensional (3‐D) culture systems influence human embryonic stem cell (hESC) phenotypes and fate choices. However, the effect that these microenvironmental changes have on signaling pathways governing hESC behaviors is not well understood. Here, a 3‐D microwell array was used to investigate differences in activation of developmental pathways between 2‐D and 3‐D cultures of both undifferentiated hESCs and hESCs undergoing initial differentiation in embryoid bodies (EBs). An increased induction into mesoderm and endoderm and differences in expression of genes from multiple signaling pathways that regulate development, including Wnt/β‐catenin, TGF‐β superfamily, Notch, and FGF during EB‐mediated differentiation were observed in 3‐D microwells as compared with the 2‐D substrates. In undifferentiated hESCs, differences in epithelial‐mesenchymal transition phenotypes and the TGFβ/BMP pathway between cultures in 3‐D and 2‐D were also observed. These results illustrate that 3‐D culture influences multiple pathways that may regulate the differentiation trajectories of hESCs. © 2014 American Institute of Chemical Engineers AIChE J, 60: 1225–1235, 2014     

Polyester composite water uptake and organic contaminant release affected by carbon nanofiber reinforcements

The incorporation of carbon nanofiber (CNF) into glass fiber (GF) composites is a potential route to extend polymer composite service‐life and enhance mechanical properties. Under nonstatic conditions, only limited information concerning water uptake and contaminant release properties of nanocomposite materials is currently available. Polyester composites containing GF and oxidized CNF were immersed in water for 30 days under nominal pressure at 23 °C, below the polymer's glass‐transition temperature. Water was analyzed and changed every three days to simulate water chemistry regeneration similar to exposures in flowing systems. Composites with oxidized CNF had greater water sorption capacity and leaching rates than CNF‐free composites. The total mass of organic contaminant released correlated with the amount of water sorbed by each composite (r² = 0.91), although CNF dispersion was found to vary greatly within composites. The greatest and least contaminant release rates were found for the polyester‐CNF and the polyester‐GF composites, respectively. While volatile aromatic resin solvents and stabilizer compounds were detected, their concentrations declined over the 30 day exposure period. We hypothesize that the hydrophilic nature of the oxidized CNF increased the water sorption capacity of the polyester composites. Additional studies are warranted that examine the impact of this phenomenon on composite mechanical and long‐term durability properties. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43724.     

A finite element study of the effect of the angle between two intersecting cylindrical shells subjected to internal pressure

The results of a study of the critical region of two intersecting cylindrical shells due to internal pressure loading are presented as a function of the angle between the two axes. The investigation was performed using the thin shell element of a three-dimensional finite element program. Three models with the angle between the axes of the two cylindrical shells equal to 30, 60, and 90°, were analyzed. In all of the three models, the diameter ratio of the two shells was 0.5283; the diameter to thickness ratio of the larger or main shell was 44.76, while the same ratio for the smaller or attached shell was 15.487. The results of these analyses show that the stresses in the critical intersection region are least when the two axes are perpendicular to each other; for other angular configurations, the stresses increase as the acute angle between the two axes decrease. This effect of inclination for pressure loading is just opposite of the effect found by authors [1] for external moments. In that case, for in-plane as well as out-ofplane moments, the stresses are larger for normally intersecting shells as compared to other angular configurations.     

Spectrum sensing scheduling for group spectrum sharing in cognitive radio networks

This paper addresses the issues on spectrum sharing in a cognitive radio network consisting of a primary user and a group of cognitive users. Each cognitive user may occupy a non‐overlapped sub‐band of the primary spectrum, but it needs to perform spectrum sensing independently before accessing the sub‐band. To reduce the complexity of spectrum sensing and thus energy consumption, this paper proposes a scheduled spectrum sensing scheme. First, we consider a single spectrum sensing scenario where only one cognitive user is elected to perform spectrum sensing, and then it broadcasts its sensing results to the other cognitive users. The scheduled spectrum sensing scheme works in both network‐centric and user‐centric ways. Next, the scheduled spectrum sensing scheme is further generalized to work in a multiple spectrum sensing scenario. The results show the effectiveness of the proposed schemes compared with the traditional schemes where all cognitive users may perform spectrum sensing at the same time. Copyright © 2010 John Wiley & Sons, Ltd.