Isolation and characterisation of lactic acid bacteria from jiang-gua (fermented cucumbers), a traditional fermented food in Taiwan

BACKGROUND: Jiang‐gua (fermented cucumbers) is a popular traditional fermented food in Taiwan. The microflora of lactic acid bacteria (LAB) in jiang‐gua have not been investigated in detail. In this study, LAB from jiang‐gua were isolated, characterised and identified. RESULTS: A total of 103 LAB were isolated; 70 cultures were isolated from jiang‐gua samples and 33 cultures were isolated from its raw substrate, cucumber. These isolates were mainly characterised phenotypically and then divided into seven groups (A‐G) by restriction fragment length polymorphism analysis and sequencing of 16S ribosomal DNA. The isolates were identified as Enterococcus casseliflavus, Leuconostoc lactis, Leuconostoc mesenteroides, Lactobacillus pentosus, Lactobacillus plantarum, Lactobacillus paraplantarum, Lactococcus lactis subsp. lactis, Weissella cibaria and Weissella hellenica. The antibacterial activities of the isolates were determined and 11 Lc. lactis subsp. lactis strains showed inhibitory activity against the indicator strain Lactobacillus sakei JCM 1157^T. CONCLUSION: Heterofermentative W. cibaria and Leu. lactis were the major LAB found in jiang‐gua samples without soy sauce. In soy sauce‐added samples, homofermentative L. pentosus and L. plantarum were the most abundant LAB. In addition, the results also suggested that HhaI and RsaI restriction enzymes could be applied to distinguish W. hellenica and Weissella paramesenteroides. Copyright © 2012 Society of Chemical Industry     

Effect of molecular weight of an anionic dispersant on the properties of BaTi4O9 slurries

The colloidal stability of BaTi₄O₉ (BT₄) aqueous suspensions with poly(acrylamide‐co‐4‐carboxylamino‐4‐oxo‐2‐butenate) (PAC) of different molecular weights at pH 9 has been investigated by means of zeta potential, adsorption, sedimentation, and particle size measurements. The results indicate that PAC could improve the dispersion of the particles from agglomeration. The resulting suspensions became more stabilized, and contained powder with smaller particle size. Consequently, the compacts with PAC exhibited better properties in terms of density and dielectric constant than those without any polymer present. The performance of PAC increased with decreasing polymer molecular weight. Clearly, PAC1 (M_w = 1.8 × 10⁴) was most effective in dispersing the BT₄ particles, and stabilizing the ceramic suspensions. This is attributed to the highest adsorption of this polymer onto BT₄ powder, and causes strongest electrostatic repulsions among solid particles. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Development of a Quantitative Multi-Class Method for 18 Antibiotics in Chicken, Pig, and Fish Muscle using UPLC-MS/MS

A rapid multi-residue/multi-class procedure utilizing ultra performance liquid chromatography tandem mass spectrometry (UPLC/MS/MS) detection has been developed and validated to monitor 18 veterinary drugs, including macrolides (clarithromycin, erythromycin, josamycin, kitasamycin, natamycin, neospiramycin, oleandomycin, spiramycin, tilmicosin, tylosin, and virginiamycin M1), β-lactams (ampicillin, cefoperazone, cloxacillin, and mecillinam), lincosamides (clindamycin and lincomycin), and one quinolone (orbifloxacin), in pig, chicken, and fish muscle. Two grams of homogenized muscle sample were fortified with the 18 drugs. The drugs were extracted using two extraction solutions and then were cleaned up with n-hexane and SPE. Data acquisition with MS/MS was achieved using the multiple reaction monitoring modes to acquire the data. The method was validated at four concentration levels within the designated linear ranges for each drug, with most recoveries greater than 75?% and most coefficients of variation (CV) values less than 15?%.     

Failure modes and effects analysis for high-power GaN-based light-emitting diodes package technology

In this study, nondestructive test is developed to analyze the structure failure of LED package. The relationship between thermal resistance analysis and LED package failure structure is build with T3Ster thermal transient tester and scanning electron microscope (SEM). The failure LED device with defect in the attaching layer and gap between LED chip and copper are designed advisedly. The failure factors of LED package have been measured with thermal resistance analysis and SEM cross-section images. The thermal dissipation performance of LED with defect in the attaching layer is indicated by thermal resistance analysis combined with SEM cross-section images. The blister in attaching layer results in 4.4 K/W additional thermal resistance. The gap between LED chip and copper also makes high additional thermal resistance with 8.6 K/W. Different failures of LED packages are indicated obviously using thermal transfer analysis. The LED package failure structure such as interface defect between solder and cup-shaped copper is able to forecast without destructive measurement.     

The Transparent Conductive Properties of Manganese-Doped Zinc Oxide Films Deposited by Chemical Bath Deposition

Manganese-doped zinc oxide (Mn-doped ZnO) thin films were prepared using chemical bath deposition (CBD), and the impacts of the manganese dopant concentration on the structure, electrical resistivity, optical transmission, and magnetic properties were investigated using x-ray diffractometry, Hall-effect measurements, ultraviolet–visible–near-infrared (UV–Vis–IR) spectrophotometry, and vibrating sample magnetometry (VSM), respectively. The concentration of the manganese dopant in the ZnO thin film critically impacted the resulting properties, and the 4.0 at.% Mn-doped ZnO film had a resistivity of 5.8 × 10⁻² Ωcm, transmittance of 75.6% in the visible light range, and bandgap of 3.30 eV when the film was annealed at 600°C in an Ar + H₂ atmosphere. Annealing the film could enhance its magnetic properties such that the film had a saturation magnetization of 21.0 emu/cm³ and a coercivity of 45.7 Oe after annealing at 600°C. Because of these electrical, optical, and magnetic properties, Mn-doped thin films are promising for use in spintronic devices.     

Design and realization of 1.3?Gb/s off-chip transmission circuitry using 0.35?μm CMOS technology

Low-voltage-differential-signaling (LVDS) is one of the very popular technologies which simultaneously addresses low dynamic power consumption and high data rate transmission in modern high speed circuit applications. In this paper, system level integration design approach is applied to design LVDS transmitter featuring high off-chip data rate. Full wave electromagnetic simulation technique was adopted to accurately characterize possible couplings and parasitic effects induced from the off-chip components which then acted as the termination of the output circuitry. Common mode feedback was included to perform fine tuning on the offset leading to much higher overall precision. Meanwhile, generation of the controlled current and voltage across termination was guaranteed through the introduction of a constant transconductance bias network. The design was implemented using TSMC 3.3?V 0.35???m CMOS technology with overall chip size of 0.923?mm². At a DC power consumption level of 29.4?mW, the LVDS transmitter exhibited an off-chip data rate of 1.3?Gb/s validated through measurements.     

Mobile device integration of a fingerprint biometric remote authentication scheme

Various user authentication schemes with smart cards have been proposed. Generally, researchers implicitly assume that the contents of a smart card cannot be revealed. However, this is not true. An attacker can analyze the leaked information and obtain the secret values in a smart card. To improve on this drawback, we involve a fingerprint biometric and password to enhance the security level of the remote authentication scheme Our scheme uses only hashing functions to implement a robust authentication with a low computation property. Copyright © 2011 John Wiley & Sons, Ltd.     

Nanoporous platinum counter electrodes by glancing angle deposition for dye-sensitized solar cells

We report an effective way to produce nanoporous Pt counter electrodes of dye-sensitized solar cells by the glancing-angle deposition (GLAD) technique. By controlling the orientation of the substrate relative to the incident Pt vapor flux during the deposition, nanoporous films composed of inclined nm-scale columns were produced through the self-shadowing effect. Pt counter electrodes having varied nanoporous structures were characterized for their morphological and electrochemical properties, and were subjected to device studies to establish the correlation with DSSC characteristics/performances. The results suggest that the nanoporous GLAD Pt electrodes can effectively enhance active surface areas, the catalytic ability and charge exchange at the Pt/electrolyte interface of a DSSC. As a result, the quantum efficiency, short-circuit current, and power conversion efficiency of the DSSC can be enhanced by up to 12–13% with using the nanoporous GLAD Pt counter electrodes.     

Dithienocarbazole‐Based Ladder‐Type Heptacyclic Arenes with Silicon,Carbon, and Nitrogen Bridges: Synthesis,Molecular Properties,Field‐Effect Transistors,and Photovoltaic Applications

A new class of ladder‐type dithienosilolo‐carbazole ( DTSC ), dithienopyrrolo‐carbazole ( DTPC ), and dithienocyclopenta‐carbazole ( DTCC ) units is developed in which two outer thiophene subunits are covalently fastened to the central 2,7‐carbazole cores by silicon, nitrogen, and carbon bridges, respectively. The heptacyclic multifused monomers are polymerized with the benzothiadiazole ( BT ) acceptor by palladium‐catalyzed cross‐coupling to afford three alternating donor‐acceptor copolymers poly(dithienosilolo‐carbazole‐alt‐benzothiadiazole) ( PDTSCBT) , poly(dithienocyclopenta‐carbazole‐alt‐benzothiadiazole) ( PDTCCBT), and poly(dithienopyrrolo‐carbazole‐alt‐benzothiadiazole) ( PDTPCBT) . The silole units in DTSC possess electron‐accepting ability that lowers the highest occupied molecular orbital (HOMO) and lowest unoccupied molecular orbital (LUMO) energy levels of PDTSCBT , whereas stronger electron‐donating ability of the pyrrole moiety in DTPC increases the HOMO and LUMO energy levels of PDTPCBT . The optical bandgaps (E_g^opt) deduced from the absorption edges of thin film spectra are in the following order: PDTSCBT (1.83 eV) > PDTCCBT (1.64 eV) > PDTPCBT (1.50 eV). This result indicated that the donor strength of the heptacyclic arenes is in the order: DTPC > DTCC > DTSC . The devices based on PDTSCBT and PDTCCBT exhibited high hole mobilities of 0.073 and 0.110 cm² V^?1 s^?1, respectively, which are among the highest performance from the OFET devices based on the amorphous donor‐acceptor copolymers. The bulk heterojunction photovoltaic device using PDTSCBT as the p‐type material delivered a promising efficiency of 5.2% with an enhanced open circuit voltage, V_oc, of 0.82 V.