Fixed-order H∞ compensator design

A method is presented for the construction of fixed-order compensators to provide H_∞ norm constraint for linear control systems with exogenous disturbances. The method is based on the celebrated bounded-real lemma that predicates the H_∞ norm constraint via a Riccati inequality. The synthesis of fixed-order controllers whose dimensions are less than the order of a given plant, is demonstrated by a set of sufficient conditions along with a numerical algorithm.     

Nucleation Mechanism for Bainite

Based on the experimental results that solute-depleted zone was observed in Cu-28Zn-4AI (mass fraction) at 523 K, AG is calculated as a positive according to the thermodynamic criteria for the spinodal decomposition of a ternary systems. So, the solute-depleted zone cannot be formed by spinodal decomposition. Dislocation density required by the formation of solute-depleted zone is estimated greater than 7.89×109 cm-2, according to the segregation of solute atoms around dislocations, which is not consistent with the practical situation for the alloy at 523 K. Associated with the internal friction experimental fact that internal friction peaks appear within the incubation for bainitic transformation in Cu-Zn-AI alloy, the equilibrium temperature, TO, is evaluated as 433 K for solute-depleted Cu-25Zn-3.4AI, which is lower than the experimental temperature 523 K. Thus, nucleation by shear mechanism is impossible in this circumstance. Therefore, it is concluded that, like bainite in steels and Ag-Cd, bainite in     

Development of a fuzzy decision model for manufacturability evaluation

A manufacturability evaluation decision model is formulated and analyzed based on fuzzy logic and multiple attribute decision-making under the concurrent engineering environment. The study emphasizes on the treatment of the linguistic and vagueness at the early product development stage. The study also considers the function integration of the total life cycle of a product. Hence, the integrated decision model covers the multi-level, multi-goal requirements of the products. Multiple criteria such as the goal space, the decision space, the function space, the development (i.e., product & process design) space, and the activity space, are then applied under different analysis of decision-making methods. For instances, the fuzzy multiple attribute decision-making (FMADM) combined with activity-based costing (ABC) can be used in the activity decision space. The fuzzy logic decision model can be applied in the goal decision space. The results of this study point out the importance of early decision making capability. An example of a high-pressure vessel is provided to demonstrate the proposed model for evaluating the manufacturability.     

Note on ‘Construction of Double Sampling s‐Control Charts for Agile Manufacturing’

He and Grigoryan (Quality and Reliability Engineering International 2002; 18 :343–355) formulated the design of a double‐sampling (DS) s control chart as an optimization problem and solved it with a genetic algorithm. They concluded that the DS s control charts can be a more economically preferable alternative in detecting small shifts than traditional s control charts. We explain that, since they only considered the average sample size when the process is in control, their conclusion is questionable. Copyright © 2006 John Wiley & Sons, Ltd.     

Optimum power-saving method for power MOSFET width of DC/DC converters

An optimum power metal-oxide-semiconductor field effect transistor (MOSFET) width technique is proposed for enhancing the efficiency characteristics of switching DC-DC converters. By implementing a one-cycle buck DC-DC converter, it is demonstrated that the dynamic power MOSFET width controlling technique has a much improved power reduction whether the load current is light or heavy. The maximum efficiency of the buck converter is ~92% with a 3% efficiency improvement for the heavy load condition. The efficiency is further improved by ~16% for the light load condition as a result of the power reduction from the large power MOSFET transistors. Also proposed is a new error-correction loop circuit to enable a better load regulation than that of previous designs. Compared with the adaptive gate driver voltage technique, the optimum power MOSFET width can achieve a significant improvement in power saving. It is also superior to the low-voltage-swing MOSFET gate drive technique for switching DC-DC converters     

Robust State Feedback Control Through Actuators With Generalized Sector Nonlinearities And Saturation

In control systems, actuators often have nonlinear characteristics that can not be neglected. For linear systems driven by actuators satisfying the generalized sector condition, a robust state feedback controller synthesis method is proposed to achieve the ultimate boundedness control. The method is based on the linear matrix inequality approach and is easy to apply. As an important special case of the generalized sector condition, the saturation characteristic of actuators is discussed separately, and non‐conservative results are obtained.     

Interleukin-2 enhancement of cytotoxicity by humanized monoclonal antibody M195 (anti-CD33) in myelogenous leukemia

The mass childhood immunization programme has traditionally been viewed as a safe and effective preventative measure by health promoters, primary health care professionals and governments. This consensus has meant that immunization has rarely been viewed as ethically problematic. A number of recent changes in the context of the delivery of health care, particularly the emphasis on consumerism and the effect of the marketization of services, makes timely an examination of ethical, social and political issues. This article examines four main grounds for problematizing the mass childhood immunization programme. These are: clinical research evidence about the safety and efficacy of vaccines; the masking of wider social and political determinants of ill health; the contradictory strictures about collective and individual rights in relation to immunization; and the uniqueness of childhood immunization as a physical intrusion into a healthy body. The implications of these ethical issues are discussed in relation to informed consent and the need for a 'greenfield' review that includes the views of dissenting parents, lawyers and moral philosophers, as well as health professionals.     

Respiratory mechanics of the horse during the first year of life

This study investigated the developmental changes in the mechanical properties of the respiratory system in growing horses. Pulmonary mechanics and lung volumes were serially measured in anesthetized foals during the first year of life. Quasi-static pressure-volume curves were generated, and functional residual capacity (FRC) was measured using a closed nitrogen equilibration technique. At birth, chest wall compliance normalized to body weight was substantially less than that reported in other less precocious newborn species, while lung compliance normalized to body weight was similar to values reported for other species. Characteristics of the transition from the neonatal to adult respiratory system in the foal included a decrease in the ratios of chest wall to lung compliance (Cw/CL) and the unstressed volume of the chest wall to TLC, and a constant FRC/TLC throughout most of the study period. The somatic growth of the foal and its respiratory system were uneven processes, with increases in lung volume lagging increases in overall body size.     

A Hammerstein-based dynamic model for hysteresis phenomenon

The Hammerstein configuration, which includes a nonlinear static block followed by a linear dynamic block, is applied to model the rate-dependent and temperature-dependent hysteresis phenomenon. The nonlinear static block is realized by a modified Preisach model, which includes both the irreversible and reversible components of magnetization. The linear dynamic block is realized by a low-pass filter, which takes into account the rate-dependent effects of hysteresis. Temperature dependencies are incorporated into the model by fitting the model parameters as piecewise-linear functions of temperature. A procedure is described for the extraction of a single set of model parameters over the frequency, amplitude, and temperature ranges of interest. The theory is verified experimentally