Vibration thresholds for fretting corrosion in electrical connectors

Single frequency vibration tests were used to induce fretting corrosion in tin alloy plated contacts. The samples used in this study were connectors consisting of 25 pairs of mated pin and socket contacts. Experimental results for a variety of vibration levels, frequencies, and wiring tie-off lengths are presented. The experiments consisted of running a series of vibration tests at each frequency where the excitation level was stepped through a range of g-levels. During each test run contact resistance was monitored as a performance characteristic. The results exhibit threshold behavior at each frequency for the onset of fretting degradation. Typically a plateau region was observed where similar g-levels produced similar fretting rates. It was also found that outside the plateau region the g-levels varied according to the dynamic behavior of the mechanical system. In addition, a transfer matrix model was used to analyze these results. An empirical fit of the data correlated well with the model when damping was used. This analysis revealed the importance of the bending moment induced at the contact interface as a result of excitation levels and tie-off configurations. Consequently, it is concluded that dynamic response of the mechanical system under various g-levels and tie off configurations can greatly impact the performance of a connector system subjected to vibration stresses.     

Examining a curvilinear relationship between communication frequency and team performance in cross-functional project teams

The performance of a cross-functional team depends on the skillful and innovative combination of information and expertise from all team members. Communication is the medium through which team members share the information required for successful amalgamation. In this work, we postulate that both high and low levels of team communication can impede team performance, thus leading to a curvilinear relationship between team performance and team communication. To test this hypothesis, the relationships between face-to-face, e-mail, and telephone communication and team performance were examined for 60 cross-functional project teams. E-mail and face-to-face communication were curvilinearly associated with performance, but telephone communication was not. Further analysis of the communication frequency between colocations showed that e-mail is the only medium for which usage increased with distance.     

Formation of C49-TiSi2 in flash memories: a nucleation controlled phenomenon?

The formation of Ti silicides has been examined in flash memories with 0.25 μm linewidth by X-ray diffraction, scanning electron microscopy, and transmission electron microscopy. It has been observed that, after the first rapid thermal process and the selective metal etch, there is no silicide on the source and on a majority of drain contacts while C49-TiSi₂ is found on the gate. A pre-amorphisation implant increases drastically the formation of C49-TiSi₂ in the drain zone while modifications of annealing conditions have little impact. These results indicate that the formation of C49-TiSi₂ is most likely controlled by nucleation and that this nucleation is sensitive to both the width and the length of the reaction zone. The formation of a Ti rich silicide may play an important role in this nucleation by decreasing the driving force for the formation of C49-TiSi₂. Curiously enough, the formation of C49-TiSi₂ appears thus as a major concern for the salicide process in flash memories.     

Microrheology as a tool for high-throughput screening

Microrheology can be used for high-throughput screening of the rheological properties of sample libraries of complex fluids. Two passive techniques are particularly suitable: video microscopy and diffusing-wave spectroscopy. The techniques complement each other very well and can be applied to samples that offer different experimental challenges. We offer a thorough analysis of the strengths and limitations of microrheology with the emphasis on high-throughput applications. To illustrate the potential of microrheology, results are presented for two representative cases: the rheological screening of aqueous solutions of a block copolypeptide library and the rheological phase diagram of a water/surfactant/salt system.     

Distance spectrum analysis of space-time trellis-coded Modulations in quasi-static Rayleigh-fading channels

In this correspondence, we propose an algorithm for computing the distance spectrum of a space-time trellis code achieving maximal diversity gain in quasi-static fading channels. We further present a state reduction technique for trellis codes that can reduce the complexity of the distance spectrum computation. We provide numerical results supporting the empirical evidence that a truncated union bound obtained from the distance spectrum provides an accurate characterization of the relative performance ordering of different space-time trellis codes and, therefore, it offers a tool for better space-time trellis code design.     

Study of internal behavior in a vertical DMOS transistor under short high current stress by an interferometric mapping method

Current distribution in vertical double-diffused MOS (DMOS) transistors of a Smart Power Technology are investigated under high current, short duration operation conditions by means of a backside laser interferometric thermal mapping technique. DMOS devices of different areas are studied under pulsed gate forward operation mode and under electrostatic discharge (ESD)-like stress with floating and grounded gate. The internal behavior of the devices observed by thermal mapping under these stress conditions is correlated with the electrical characteristics.     

Pile Response Adjacent to Braced Excavation

The excavation of soil for the construction of basements or cut-and-cover tunnels results in ground movements. One particular concern is that the excavation-induced lateral soil movements may adversely affect any nearby pile foundation. The lateral loads imposed by the soil movements induce bending moments and deflections in the pile, which may lead to structural distress and failure. This paper presents the results of an actual full-scale instrumented study that was carried to examine the behavior of an existing pile due to nearby excavation activities resulting from the construction of a 16 m deep cut-and-cover tunnel. The pile was located 3 m behind a 0.8 m thick diaphragm wall. Excavation to the formation level that was 16 m below the ground surface resulted in a maximum lateral pile movement of 28 mm. A simplified numerical procedure based on the finite-element method was used to analyze the pile response. Generally, the theoretical predictions were in reasonable agreement with the measured results.     

Editorial: Final Thoughts and the Passing of the Editorial Mantle.

The retiring editor of the Journal of Family Psychology (1997-2003) offers final thoughts on the passing on of the editorship and extends thanks to journal associates. (PsycINFO Database Record (c) 2010 APA, all rights reserved)