奔驰重卡转向节挤压锻造复合工艺的有限元分析

奔驰重型卡车的转向节挤压锻造工艺，分为镦粗、挤压、预锻和终锻4个工步。针对汽车转向节的挤压锻造进行的有限元分析。模拟软件采用Deform 3D，锻件采用刚塑性材料模型，成形过程看作为等温成形。报告给出了毛坯形状和尺寸、锻件形状变化，成形等效应变分布以及载荷——行程曲线等。实验表明，模拟结果和实际成形过程吻合良好。     

Numerical simulation of gas metal arc welding temperature field

The infrared camera is used to investigate the temperature field of gas metal arc welding.The results show that the temperature distribution of weld pool and adjacent area appears cone shape.A new heat source model combined by Gaussian distribution heat source of the arc and conical distribution heat source of the droplet is set up based on the experimental results, and with the combined boundary conditions,the temperature field of gas metal arc welding is simulated using finite element method.According to the comparison between the results of experiment and simulation in temperature field shows that the new combined heat source model is more accurate and effective than the Gauss heat source model.     

热丝化学气相沉积法原位制备的MgB2超导薄膜

用热丝化学气相沉积法(HFCVD)在蓝宝石基片上原位制备了MgB2超导薄膜,并用XRD、SEM和dc SQUIDs研究了基片温度和时间对薄膜相组成、表面形貌和超导临界转变温度Tc的影响.结果表明,HFCVD原位生长MgB2薄膜可以抑制MgO杂质的生成.基片温度在500℃以下,MgB4杂相容易出现;在500℃以上时,可以消除MgB4杂相;在600℃时,获得了纯单相的MgB2薄膜,其超导临界转变温度达到36 K.随基片温度升高,薄膜结晶性、致密度和超导临界转变温度提高.     

挤压模具型腔轮廊曲线优化拟合分析

采用三次样条函数插值和Bezier曲线拟合两种方法来完成挤压模具型腔轮廓形状的优化设计 ,以挤压表面载荷沿凹模型腔轮廓表面均匀分布来提高模具寿命为优化目标 ,运用刚塑性有限元分析和修正的序列二次规划算法相结合的方法 ,获得了各自优化了的凹模型腔轮廓曲线。通过有限元软件验证了优化结果的有效性和可行性。将这些方法应用于气门及其他类似零件的生产 ,证明了优化的凹模型腔轮廓曲线对提高模具使用寿命有显著效果     

焊接结构应力松弛开裂模拟试验研究

利用Ｇｌｅｅｂｌｅ模拟试验机进行了一种新的不等温应力松弛试验来考察两种低合金钢的焊后应力松弛开裂敏感性。该试验方法以热膨胀量补偿法模拟整个去应力处理（包括加热和保温）中与应力松弛开裂产生过程吻合的应力—温度条件。试验获得了一种连续加热断裂时间—温度“Ｃ”曲线及不等温应力松弛塑性的新概念，并定量测出了材料在此过程中的应力松弛塑性及其与温度的关系。     

Preparation, thermal stability, and magnetic properties of Fe---Co---Zr---Mo---W---B bulk metallic glass

A bulk metallic glass (BMG) cylinder of Fe₆₀Co₈Zr₁₀Mo₅W₂B₁₅ with a diameter of 1.5 mm was prepared by copper mould casting of industrial raw materials. The amorphous state and the crystallization behavior were investigated by X-ray diffraction (XRD). The thermal stability parameters, such as glass transition temperature (T_g), crystallization temperature (T_x), supercooled liquid region (ΔT_x) between T_g and T_x, and reduced glass transition temperature T_rg (T_g/T_m) were measured by differential scanning calorimetry (DSC) to be 891, 950, 59 K, and 0.62, respectively. The crystallization process took place through a single stage, and involved crystallization of the phases -Fe, ZrFe₂, Fe₃B, MoB₂, Mo₂FeB₂, and an unknown phase, as determined by X-ray analysis of the sample annealed for 1.5 ks at 1023 K, 50 K above the DSC peak temperature of crystallization. Mössbauer spectroscopy was studied for this alloy. The spectra exhibit a broadened and asymmetric doublet-like structure that indicated paramagnetic behavior and a fully amorphous structure. -Fe was found in the amorphous matrix for a cylinder with a diameter of 2.5 mm. The success of synthesis of the Fe-based bulk metallic glass from industrial materials is important for the future progress in research and practical application of new bulk metallic glasses.     

卷绕铅酸电池泡沫铅负极电化学行为的研究

以泡沫铅作为负极集流体制备了卷绕VRLA电池.采用计时电流法、循环伏安曲线、电化学阻抗谱和充放电实验研究了泡沫铅负极的电化学行为,结果表明泡沫铅负极的真实表面积比铅箔负极的大,因此泡沫铅负极具有较低的过电势,并且不论是在怎样的放电状态下,泡沫铅负极的电化学反应电阻较小;与铅箔负极相比,在10、5和2小时率放电状态下,泡沫铅负极的质量比容量分别增加25.9%,30.0%和48.2%.此外,SEM观察显示,泡沫铅负极表面活性物质为更加细小的晶体颗粒和具有更高的孔率.     

等径角挤压法制备超细晶的研究现状

总结了等径角挤压(Equal Channel Angular Pressing，ECAP)过程中的影响因素、晶粒细化的机理等方面的研究进展，讨论了挤压温度、挤压速度在ECAP过程中对材料的影响，简述了ECAP的变形途径、变形次数对材料晶粒、材料变形量的影响。论述了由等径角挤压方法制备超细晶材料的发展现状并提出了一些需要进一步深入研究的方面。     

Ti_3Al基合金(0001)_(α_2)//(110)_β界面价电子结构分析

基于固体与分子经验电子理论,以改进的TFD理论提出的电子密度连续的量子力学条件为判据,计算了Ti3Al基合金中(0001)α//(110)β2界面的价电子结构。对比分析了单相Ti3Al基合金2-Ti3Al2-(Ti)Al(0001)//(0001)ααxMy界面与多相Ti3Al基合金(0001)α2-Ti3Al//(110)β-Ti0.5xAl0.5M0.5y,(0001)α2-(TixMy)Al//(110)β-Ti0.5xAl0.5M0.5y界面电子结构。从电子结构层次上初步解释了延性β相改善合金薄弱的相界面电子结构与键结合,增加界面稳定性与连续性,提高合金强韧性的微观本质。     

合金元素对Zr基大块非晶晶化行为的影响

利用准晶的共轭结构模型构造出了Zr基非晶合金中准晶相的原子结构模型,用递归方法研究了合金元素对非晶晶化过程的影响.结果表明:Zr基非晶合金析出的准晶相存在Zr6Ni,Ni6Zr2种结构,Ni6Zr结构优先析出;合金元素Ag,Pd,Pt,Au固溶于准晶中时,占据Cu,Ni原子的位置,增大近邻原子间的相互作用,这从电子理论角度解释了合金元素Ag,Pd,Pt,Au稳定地促进二十面体准晶(I)相析出的事实.