PC／PA1010共混物的热行为

利用热失重、微分热失重和显示扫描量热法研究了聚碳酸酯／尼龙１０１０共混物的热行为和解降解过程。结果表明：共混物在６００℃以下分两步降解，降解温度随尼龙１０１０用量增加有下降趋势；共混物的熔点随尼龙１０１０用量增加而升高。     

聚丙烯酸钾与腐植酸复合高吸水性树脂的合成研究

以腐植酸与丙烯酸聚合制备了高吸水性树脂,讨论了交联剂、引发剂以及KOH用量对聚丙烯酸与腐植酸高吸水性树脂吸水率的影响,结果显示在n(MBA)∶n(AA)=0.0005、n(KPS)∶n(AA)=0.0075、n(KOH)∶n(AA)约为0.70、温度为80℃的条件下合成时,其吸水倍率可达到最优值。而且在接近自然条件下(35℃)失水速度慢,保水时间可达100 h以上,重复吸水性能好。运用红外光谱分析了腐植酸与丙烯酸的反应机理。     

氧化硅有序介孔材料MCM-41的微波水热合成及用于组装ZnO纳米粒子

与传统水热合成工艺相比,采用微波水热合成新工艺可以快速合成比表面积大、孔体积和孔径大、孔径分布范围更窄、孔洞呈六方排布的有序介孔材料MCM-41.微波水热合成工艺合成的MCM-41具有合成效率高、成功率高等特点,为此类介孔材料商业化提供了高效的技术手段.采用传统水热工艺合成MCM-41通常需要48～72 h,而采用微波水热合成技术仅需要30 min.采用X射线粉晶衍射(XRD),氮气吸附等技术手段对合成MCM-41材料的物相、比表面积、孔体积、孔径等进行了表征.采用微波水热合成MCM-41的工艺参数为:微波处理的温度120 ℃,时间30 min,微波辐射功率500 W,经过滤、洗涤、干燥、焙烧等处理后,得到的MCM-41具有六方排布的孔系,晶格常数a0=4.4nm,比表面积可达1113 m2/g,平均孔径为2.7 nm,与选用同样配方采用传统水热合成工艺合成的MCM-41的性能相当,却极大提高了合成效率.采用微波水热合成工艺,同样可以合成立方晶系的MCM-48和六方晶系的SBA-15等介孔氧化硅分子筛材料.此外,在微波合成的MCM-41中采用液相工艺成功组装了ZnO纳米粒子,并对组装在MCM-41中的纳米ZnO粒子进行了光催化降解苯酚的实验研究.     

浅析化工企业信息化建设中的问题和对策

加入WTO后,为了提高化工企业的核心竞争力,企业信息化建设已势在必行。本文简要介绍了我国化工企业目前在信息化建设中存在的主要问题以及应采取的对策。     

氯化聚丙烯改性胶粘剂的合成及粘附性能研究

以甲苯为溶剂，过氧化二苯甲酰(BP0)为引发剂，通过自由基聚合，采用甲基丙烯酸羟乙酯(HEMA)和苯乙烯(St)接枝改性氯化聚丙烯(CPP)。研究了不同苯乙烯用量、不同反应温度、不同反应时间、不同引发剂用量对改性氯化聚丙烯胶粘剂粘附性能的影响，得出较佳的工艺条件为反应温度90℃，反应时问2h，原料配比m(CPP)：m(HEMA)：m(St)：m(BPO)=50：0．5：0．6：0．15。     

掺Li_2O–B_2O_3–SiO_2玻璃低温烧结MgTiO_3–CaTiO_3陶瓷及其微波介电性能

研究了Li_2O–B_2O_3–SiO_2玻璃(LBS)对MgTiO_3–CaTiO_3(MCT)介质陶瓷烧结特性、相组成和介电性能的影响,分析了MCT陶瓷与银电极的共烧行为。结果表明通过液相烧结,LBS能有效降低MCT烧结温度至890℃。X射线衍射结果显示有Li_2MgTi_3O_8、硼钛镁石以及Li_2TiSiO_5等新相生成。随着LBS添加量的增大,陶瓷致密化温度和饱和体积密度降低,介电常数εr、品质因数与谐振频率乘积Q×f也呈现下降趋势,频率温度系数τf向负值方向移动。添加质量分数为20%的LBS的0.97MgTiO3–0.03CaTiO3陶瓷在890℃烧结4h,获得最佳性能εr=16.4,Q×f=11640GHz,τf=–1.5×10–6/℃。陶瓷与银电极共烧界面结合状况良好,无明显扩散。该材料可用于制造片式多层微波器件。     

The deposition of coke from methane on a Ni/MgAl2O4 catalyst

Temperature-programmed reaction techniques and Raman spectroscopy were used to characterize coke species deposited on a 5% Ni/MgAl₂O₄ catalyst for dry reforming of methane. The CH₄ temperature-programmed decomposition profiles showed that the ignited decomposition temperatures of CH₄ increased from 273 to 378 °C when MgAl₂O₄ replaced the catalyst support γ-Al₂O₃. The temperature-programmed oxidation, temperature-programmed hydrogenation and temperature-programmed CO₂ reaction profiles showed that there were three carbon species (i.e. C_α, C_β and C_γ) on the catalyst surface. Raman spectroscopy showed that C_γ was graphite-like carbon species, which was responsible for catalyst deactivation. The C_γ species was the most inactive species toward H₂ and O₂, while it was unexpectedly more active toward CO₂. The unique reactivity of CO₂ with different coke specie could be ascribed to the carbonate, bidentate and formate species formation on MgAl₂O₄ surface. These surface species enhanced the oxidation of C_γ species and thus contributed to the high stability of Ni/MgAl₂O₄ catalyst.     

Estimation of rheological parameters using velocity measurements

In the present investigation, we develop a method for estimating rheological parameters of viscoelastic fluids using velocity measurement in a square straight channel. It is believed that a somewhat complicated patterns of secondary flows due to the non-zero second normal stress difference are more useful than the simple viscometric flows traditionally adopted in the determination of rheological parameters. The inverse problem of determining the rheological parameters from a set of velocity measurements is solved using a conjugate gradient method. When applied to a general constitutive equation encompassing the UCM model, the Oldroyd-B model and the PTT model, the present method is found to yield a reasonably accurate estimation of five rheological parameters simultaneously even with noisy velocity measurements.     

Bacillus subtilis NX-2合成g-聚谷氨酸的立体构型调控机理

探讨了在Bacillus subtilis NX-2发酵生产g-聚谷氨酸(g-PGA)过程中，Mn2+对g-PGA结构中D-和L-谷氨酸组成的影响及其与催化L-谷氨酸生成D-谷氨酸的两个相关酶?谷氨酸消旋酶和D-氨基酸转氨酶之间的关系. 当Mn2＋浓度由0增加到0.09 g/L时，D-谷氨酸比例从18%增加到77%；谷氨酸消旋酶活性从0.200 U/mg变为0.441 U/mg，提高了1倍多，D-氨基酸转氨酶活性则几乎没有变化. 说明谷氨酸消旋酶参与了L-到D-谷氨酸的转化过程，且Mn2+是通过改变谷氨酸消旋酶的活性来调节产物g-PGA的立体组成的，这与目前报道的枯草芽孢杆菌合成g-PGA过程中Mn2+浓度与g-PGA中D-, L-构型比无关的结果不同. 当Mn2＋浓度为0.03 g/L时，发酵过程中生成的g-PGA中D-谷氨酸比例不变，维持在75%左右.     

Composite polymer electrolytes based on the low crosslinked copolymer of linear and hyperbranched polyurethanes

Low crosslinked copolymer of linear and hyperbranched polyurethane (CHPU) was prepared, and the ionic conductivities and thermal properties of the composite polymer electrolytes composed of CHPU and LiClO₄ were investigated. The FTIR and Raman spectra analysis indicated that the polyurethane copolymer could dissolve more lithium salt than the corresponding polymer electrolytes of the non crosslinked hyperbranched polyurethane, and showed higher conductivities. At salt concentration EO/Li = 4, the electrolyte CHPU30‐LiClO₄ reached its maximum conductivity, 1.51 × 10^?5 S cm^?1 at 25°C. DSC measurement was also used for the analysis of the thermal properties of polymer electrolytes. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 3607–3613, 2007