10-Gb/s error-free transmission under optical reflection using isolator-free 1.3- /spl mu/m InP-based vertical-cavity surface-emitting lasers

Error-free transmission through 10-km single-mode fiber at 10 Gb/s under -13-dB optical reflections has been demonstrated for the first time using a directly modulated 1.3-/spl mu/m InP-based VCSEL without any optical isolator. The 13-GHz relaxation oscillation frequency and stable polarization suppresses relative intensity noise degradation under optical reflection. Only 1-dB error-free power penalty has been observed with optical reflection set with the worst polarization direction.     

A Pervasive Computing Curriculum for Engineering and Science Students

Today, there's an urgent need for well-trained pervasive computing engineers and scientists. Pervasive computing has evolved into a critical field, influencing a broad range of industries from healthcare to manufacturing to defense. However, most computer engineering and computer science programs pay marginal attention, at best, to the field. In this issue, the authors of the Rochester Institute of Technology describes a set of courses on pervasive computing topics and a supporting laboratory designed for both computer engineering and computer science students     

10MW高温气冷实验堆(HTR-10)燃耗测量系统控制方案的改进

基于10MW高温气冷实验堆(HTR-10)的FCA系统及CFC系统的设计原理及运行规程,在不改变FCA系统原有设备部件的前提下,对FCA系统运行逻辑关系进行了优化,改进了原燃耗测量程序,实现了燃耗测量过程的自动运行及测量结果的自动建库.在此基础上,设计了CFC系统与FCA系统PLC的通信协议,实现了燃耗测量流程与控制系统的实时数据通信.上述改进的结果使得燃料装卸流程不再需要另设运行班组,提高了效率,将人为操作的步骤最少化,降低了误操作的可能性.     

中间馏分油型加氢裂化催化剂用沸石的研究

通过水热处理法制备了3个不同脱铝深度的改性Y沸石，再经浸渍法制成中间馏分油型加氢裂化催化剂，在200mL小型加氢裂化装置上进行了催化性能评价。试验结果表明，除了沸石的酸性外，其孔结构和比表面积对催化剂的活性、中间馏分油选择性和液体收率都有很大的影响，为最大幅度提高催化剂的中间馏分油选择性并保持较好活性，要求沸石具有较低的酸量、较高的比表面积和较多的二次孔及适量的L酸量。     

一类关于鲁棒性和敏感性的泛函的优化

本文给出了一类泛函的优化方法.这类泛函包括反映系统鲁棒性和敏感性的目标函数. 其优化是通过-Rm×n→Rm×n的映射来实现的.该映射将所有配置系统极点的反馈矩阵参数 化为一自由矩阵变量的函数.     

采用模数转换技术提高脉冲激光测距的测时精度

针对脉冲激光测距中计数量化误差影响测时精度的问题,本文提出了采用模数转换技术提高测时精度的方法,并进行了可行性与精度分析,理论与实践结果均表明,该方法易于实现,能够容易地将计数量化误差减少若干个数量级。     

FATIGUE CRACK GROWTH UNDER MODE II LOADING

Abstract— The behavior of fatigue crack growth for low and medium carbon steels, an austenitic stainless steel and an aluminum alloy under pure Mode II loading was investigated experimentally, using cruciform specimens. The results show that under pure Mode II loading, fatigue crack propagation has three possibilities, namely, bifurcation into two branches, propagation along the original Mode II direction, and the mixture of these two situations, depending on the material. The growth rate da/dN vs. ΔK_II relation for Mode II propagation is similar to a Pans type law for Mode I growth. Fractographic observations by optical microscopy and SEM were made also on all specimens tested. When a crack branched, striations parallel to the crack front which were often associated with Mode I fatigue crack growth were observed and long marks parallel to the crack propagation direction were also found for slanted fracture surfaces. When a crack propagated along the original Mode II direction, many frictional marks parallel to the crack propagation direction were observed.