Analysis of thinning algorithms using mathematical morphology

A precise definition of digital skeletons and a mathematical framework for the analysis of a class of thinning algorithms, based on morphological set transformation, are presented. A particular thinning algorithm (algorithm A) is used as an example in the analysis. Precise definitions and analyses associated with the thinning process are presented, including the proof of convergence, the condition for one-pixel-thick skeletons, and the connectedness of skeletons. In addition, a necessary and sufficient condition for the thinning process in general is derived, and an algorithm (algorithm B) based on this condition is developed. Experimental results are used to compare the two thinning algorithms, and issues involving noise immunity and skeletal bias are addressed     

Lactobacillus pentosus MJM60383 Inhibits Lipid Accumulation in Caenorhabditis elegans Induced by Enterobacter cloacae and Glucose

Gut microbiota are known to play an important role in obesity. Enterobacter cloacae, a Gram-negative bacterium, has been considered a pathogenic bacterium related to obesity in the gut. In this study, we established an obesity model of C. elegans by feeding E. cloacae combined with a high glucose diet (HGD), which significantly induced lipid accumulation. An anti-lipid mechanism study revealed that the fatty acid composition and the expression level of fat metabolism-related genes were altered by feeding E. cloacae to C. elegans under HGD conditions. Lactic acid bacteria that showed antagonistic activity against E. cloacae were used to screen anti-obesity candidates in this model. Among them, L. pentosus MJM60383 (MJM60383) showed good antagonistic activity. C. eleans fed with MJM60383 significantly reduced lipid accumulation and triglyceride content. The ratio of C18:1Δ9/C18:0 was also changed in C. elegans by feeding MJM60383. In addition, the expression level of genes related to fatty acid synthesis was significantly decreased and the genes related to fatty acid β-oxidation were up-regulated by feeding MJM60383. Moreover, MJM60383 also exhibited a high adhesive ability to Caco-2 cells and colonized the gut of C. elegans. Thus, L. pentosus MJM60383 can be a promising candidate for anti-obesity probiotics. To the best of our knowledge, this is the first report that uses E. cloacae combined with a high-glucose diet to study the interactions between individual pathogens and probiotics in C. elegans.     

Evaluation of physicochemical properties and fermenting qualities of apple wines added with medicinal herbs

To evaluate the possibility for development of apple wine containing medicinal herbs, we have prepared ‘Fuji’ apple (Malus domestica) wines containing pine (Pinus densiflora Siebold et Zuccarini) needle and hwanggi (Radix Astragali)/mistletoe (Viscum album). Normal apple wine was fermented rapidly, but after 40 days fermentation/maturation, the final ethanol content, pH, total acidity, and contents of sugar/organic acid showed similar levels in 3 kinds of apple wines. In other hands, the total phenols content, antocyanins content, and brightness were higher in apple-pine wine and apple-herb wine than in normal apple wine. Apple-herb wine had higher values in total phenol contents, brightness, free amino acid contents, and quenching activity for ABTS free radicals than normal apple wine, and had similar sensory evaluation values with normal apple wine. Taken together, it is supposed that hwanggi and mistletoe might provide functional components to normal apple wine and might be applied to development of functional apple wines.     

Antioxidant potentials of buntan pumelo (Citrus grandis Osbeck) and its ethanolic and acetified fermentation products

The antioxidant potentials of buntan pumelo (Citrus grandis Osbeck) and its fermented products were determined. The essential oil from peel had higher total phenolic (214 mM) and flavonoid (134 mg QE/g of dried material) contents than those of different solvent extracts from fruit pulp. In addition, DPPH free radical-scavenging activity and ferric-reducing antioxidant power values determined for the essential oil were 26.1 ± 1.2% and 2.3 ± 0.3 mM, respectively, which were significantly higher than those of various fruit pulp extracts. The ethanol-fermented products of pumelo juice had higher total phenolic and flavonoid contents than those of fresh juice. For maintenance of the substantial antioxidant properties of pumelo products, ethanol-fermented juice rather than fresh or acetate-fermented juice is recommended. Through correlation analysis, the phenolic compounds in the fermented pumelo products were found to be the major contributors to the free radical-scavenging activity and ferric-reducing power.     

The effect of steaming on the free amino acid contents and antioxidant activity of Panax ginseng

This study was carried out to investigate changes in the free amino acid contents and antioxidant activity of Panax ginseng induced by steaming at different temperatures. For this purpose, white ginseng (WG), red ginseng (RG, ginseng steamed at 100 °C) and ginseng steamed at 120 °C (SG) were prepared using an autoclave. Most free amino acids were decreased significantly by steam treatment, with the greatest reduction observed in SG. Total content of free amino acids, 17.9 mg/g in WG was reduced to 12.2 mg/g in RG and 2.79 mg/g in SG. As for Arg which is the most predominant amino acid in ginseng, the content, 10.4 mg/g in WG, decreased significantly to 1.38 mg/g in SG. In particular, β-N-oxalyl-L-α,β-diaminopropionic acid (β-ODAP), a well-known neurotoxin, was reduced by 92.9% in SG. In contrast, the level of Maillard reaction products (MRPs) increased with steam treatment, which indicates that the reduction of most amino acids is attributed to the extent of the Maillard reaction. Based on MRPs being useful antioxidants, we assayed the scavenging activity against free radicals produced by 2,2′-azobis-(2-amidinopropane) dihydrochloride (AAPH). The radical scavenging activity of a ginseng extract increased with steam treatment, with the most potent activity in SG. Further, MRPs-rich fraction in SG showed powerful antioxidant activity, which indicates MRPs are major contributors to antioxidant activity enhanced by steam treatment.     

A new methodology for identification of critical lines using damping sensitivity analysis

When an inter-area mode dominates a low-frequency oscillation in a stressed condition, control of the active power flow of interface lines, with compensating devices, can effectively reduce the electromechanical power oscillations. In general, interface lines in which inter-area oscillations are large are considered to be good locations for installation of compensating devices. A sensitivity analysis with respect to change in active power flow can provide an important factor in electric power system operation. This paper proposes a new methodology to calculate the damping sensitivity with respect to change in active power flow, which can be useful for accurate selection of critical lines from the viewpoint of small-signal stability. In the proposed methodology, a damping sensitivity index is used to select the critical lines to damp power system oscillations. This paper describes how to derive the damping sensitivity for the selected mode and illustrates an example applying the proposed algorithm to a simple two-area system and the New England 39-bus test system.     

An Enhanced Jacobi Precoder for Downlink Massive MIMO Systems

Linear precoding methods such as zero-forcing (ZF) are near optimal for downlink massive multi-user multiple input multiple output (MIMO) systems due to their asymptotic channel property. However, as the number of users increases, the computational complexity of obtaining the inverse matrix of the gram matrix increases. For solving the computational complexity problem, this paper proposes an improved Jacobi (JC)-based precoder to improve error performance of the conventional JC in the downlink massive MIMO systems. The conventional JC was studied for solving the high computational complexity of the ZF algorithm and was able to achieve parallel implementation. However, the conventional JC has poor error performance when the number of users increases, which means that the diagonal dominance component of the gram matrix is reduced. In this paper, the preconditioning method is proposed to improve the error performance. Before executing the JC, the condition number of the linear equation and spectrum radius of the iteration matrix are reduced by multiplying the preconditioning matrix of the linear equation. To further reduce the condition number of the linear equation, this paper proposes a polynomial expansion precondition matrix that supplements diagonal components. The results show that the proposed method provides better performance than other iterative methods and has similar performance to the ZF.     

Robust shaft design to compensate deformation in the hub press-fitting and disk clamping process of 2.5″ HDDs

We investigated deformation of the outer diameter of a shaft due to the hub press-fitting and disk clamping processes associated with a 2.5″ hard disk drive. We propose a new robust shaft design to minimize the effect of deformation on the outer diameter of the shaft. We numerically show the effect of deformation on the shaft due to the pressure, stiffness, and damping coefficients of fluid dynamic bearings (FDBs), and the critical mass and excitation response of the rotor-bearing system. We also experimentally measured the axial non-repeatable runout and the amplitude at the half speed whirl frequency of FDBs with both conventional and proposed designs. Through these tests we confirm that the proposed design improves the static and dynamic performance of the FDBs and rotor-bearing system.     

Bone morphogenic protein-2 (BMP-2) loaded hybrid coating on porous hydroxyapatite scaffolds for bone tissue engineering

In this study, a silica xerogel-chitosan hybrid is utilized as a coating material to incorporate bone morphogenic protein-2 (BMP-2) on a porous hydroxyapatite (HA) scaffold for bone tissue engineering. BMP-2 is known as a therapeutic agent for improving bone regeneration and repair. Silica xerogel-chitosan hybrids have been used for the delivery of a growth factor as well as osteoconductive coatings. The biological properties of the hybrid coating incorporated with BMP-2 were evaluated in terms of the BMP-2 release behavior, osteoblastic cellular responses and in vivo performance. BMP-2 was continuously released from the hybrid coating layer on the porous HA scaffold for up to 6 weeks. The hybrid coating containing BMP-2 showed significantly enhanced osteoblastic cell responses in comparison with the hybrid coating and HA substrate. Consequently, new bone formation was significantly increased within the hybrid coating containing BMP-2. These results reveal that the hybrid coating containing BMP-2 has the potential to be used as a bone implant, whose osteogenic properties are promoted by the release of BMP-2 in a controlled manner for a prolonged period of time.