Oxidation of Zircaloy-2 studied using a wedge-shaped specimen

Experiments have been carried out to vary the stress in the oxide layer during oxidation of Zircaloy-2. This was achieved by varying the thickness of the metal substrate, using a specimen with a tapered wedge-shaped cross-section. X-ray diffraction measurements confirmed that the compressive stress level in the oxide was reduced when the metal substrate was thinner. The rate of oxidation was also slower for conditions where the stress was reduced. The results can be interpreted such that transitions in the growth result from sequential cracking of the oxide when sufficient elastic strain energy accumulates and that the cracks then enhance access of oxygen to the metal interface.     

Self-Consistent Model for Planar Ferrite Growth in Fe-C-X Alloys

A self-consistent model for non-partitioning planar ferrite growth from alloyed austenite is presented. The model captures the evolution with time of interfacial contact conditions for substitutional and interstitial solutes. Substitutional element solute drag is evaluated in terms of the dissipation of free energy within the interface, and an estimate is provided for the rate of buildup of the alloying element “spike” in austenite. The transport of the alloying elements within the interface region is modeled using a discrete-jump model, while the bulk diffusion of C is treated using a standard continuum treatment. The model is validated against ferrite precipitation and decarburization kinetics in the Fe-Ni-C, Fe-Mn-C, and Fe-Mo-C systems.     

Choosing Confrontation or Consensus in the Inner City: Lessons from a Community-University Partnership

This article describes the experiences of a Los Angeles inner-city neighbourhood in its attempt for revitalization. The authors headed a Community-University Partnership and worked with graduate students to offer technical support to a neighbourhood-based coalition. The students, local residents, merchants and neighbourhood institutions attempted to follow an asset-based consensus building approach to community development. The article describes the different components of their strategy for physical, economic, cultural and social revitalization, and analyzes the lessons learned from the successes and setbacks of this effort. Finally, the authors discuss some apparent limitations of the asset-based consensus approach.     

Addition of a reactive diluent to a catalyzed epoxy-anhydride system. I. Influence on the cure kinetics

The effect of a reactive diluent (RD) on the kinetics of the curing of an epoxy resin, based on diglycidyl ether of bisphenol A (DGEBA), with a carboxylic anhvdride derived from methyl-tetrahydrophthalic anhydride (MTHPA) catalyzed by a tertiary amine has been studied. The reactive diluent was a low-viscosity aliphatic diglycidyl ether, and the compositions per 100 parts by weight (pbw) of DGEBA were 10, 30, and 50 pbw of RD with the stoichiometric quantity of MTHPA and 1 pbw of catalyst. The curing kinetics was monitored by differential scanning calorimetry (DSC), and the kinetic parameters were determined from the nonisothermal DSC curves by the method described by Málek. The kinetic analysis suggests that the two-parameter autocatalytic model is the more appropriate to describe the kinetics of the curing reaction of this epoxy-anhydride system. The kinetic parameters thus derived satisfactorily simulate both the nonisothermal DSC curves and the isothermal conversion-time plots. Increasing the RD content leads to a small increase in both the nonisothermal and the isothermal heats of curing and has a slight effect on the kinetic parameters E, ln A, m, and n, and, consequently, on the overall reactivity of the system. On the other hand, the increase of the RD content significantly affects the structure of the crosslinked epoxy. It is confirmed that the introduction of aliphatic chains in the structure of the epoxy increases the mobility of the segmental chains in the glass transition region. The consequence of this chemical modification is a decrease of the glass transition temperature, T_g. © 1996 John Wiley & Sons, Inc.     

Physical aging in polymers: Comparison of two ways of determining narayanaswamy's parameter

In this work, we have investigated by differential scanning calorimetry the enthalpy relaxation of two poly[methyl(α-n-alkyl)acrylates] in which it is possible to change the length of the two alkyl chains. In particular, we have evaluated the Narayanaswamy parameter, which controls relative contribution of temperature and of structure to the relaxation times, by two methods: Grenet's method (GM) and the peak-shift method (PSM). The data obtained show that both methods lead to equivalent results. Nevertheless, PSM requires fewer experiments than GM, and PSM appears to be more practical. The results obtained on the two acrylates show that the parameter x increases with the lateral chain length, that is to say, that the temperature effects increase as the length of the alkyl chain is increased.     

Expanding the dairy herd in pasture-based systems: The role of sexed semen use in virgin heifers and lactating cows

A model was developed to examine the effects of sexed semen use in virgin heifers and lactating cows on replacement heifer numbers and rate of herd expansion in a seasonal dairy production system. Five separate herds were established according to the type of semen used: conventional frozen-thawed (Conv), sexed fresh semen used in lactating cows for the first 3 wk of the breeding season (SFre1), sexed frozen-thawed semen used in lactating cows for the first 3 wk of the breeding season (SFro1), sexed fresh semen used in lactating cows for the first 6 wk of the breeding season (SFre2), or sexed frozen-thawed semen used in lactating cows for the first 6 wk of the breeding season (SFro2). In the SFro1, SFre1, SFro2, and SFre2 herds, sexed semen was used for the first and second artificial insemination in virgin heifers. Pregnancy rates achieved with sexed fresh and sexed frozen-thawed semen were assumed to be 94 and 75% of those achieved with conventional frozen-thawed semen, respectively. Initial herd size was 100 cows, which was maintained for the first 2 yr of the 15-yr simulation, after which all available replacement heifers were retained to facilitate herd expansion. Two different scenarios of land availability were examined for each of the 5 herds: land available allowed expansion to a maximum herd size of 150 cows (S1), or land available allowed expansion to a maximum herd size of 300 cows (S2). Once maximum herd size was reached, sexed semen use was discontinued and all excess heifer calves were sold at 1 mo old. All capital expenditure associated with expansion was financed with a 15-yr loan. Each of the 10 different options was evaluated in terms of annual farm profit, annual cash flow, and total discounted net profit. The use of fresh sexed semen generated more replacement heifers, leading to faster herd expansion compared with frozen-thawed sexed semen and conventional frozen-thawed semen. Maximum herd size under S1 was reached in yr 5, 5, 4, 5, and 7 for the SFre1, SFro1, SFre2, SFro2, and Conv herds, respectively. Under S2, maximum herd size was reached in yr 8, 10, 7, 9, and 14 for the SFre1, SFro1, SFre2, SFro2, and Conv herds, respectively. Total discounted net profit under S1 for the SFre2 herd was €4,130, €38,869, €47,231, and €52,089 greater compared with the SFre1, SFro1, Conv, and SFro2 herds, respectively. Under S2, discounted net profit for the SFre2 herd was €44,204, €255,524, €280,373, and €325,815 greater compared with the SFre1, SFro1, SFro2, and Conv herds, respectively. The negative effects of the sexed frozen-thawed semen on herd fertility reduced farm profitability and will prevent its widespread use in lactating cows.     

Diagenesis of magnetic minerals in the intertidal sediments of the Yangtze Estuary, China, and its environmental significance

In this study, diagenesis of iron oxides in intertidal sediments of the Yangtze Estuary, China, has been investigated by combined environmental magnetic and geochemical methods. The results indicated that the magnetic properties of the sediments were dominated by ferrimagnetic magnetite. The content of Fe, DCB- and AOD-extractable iron oxides correlated positively with the concentration of fine grained magnetite near the superparamagnetic/stable single domain (SP/SSD, approximately 0.03 microm) boundary, and with anti-ferromagnetic minerals (hematite/goethite). The magnetic parameters for core SDK indicated a substantial decrease in magnetite concentration from a depth of approximately 20 cm toward the surface, together with a shift in the grain-size distribution of magnetic minerals toward the coarse end, suggesting selective dissolution of fine grained magnetite under reducing conditions. The reduction of iron oxides inferred from magnetic measurements was supported by the similar decrease in the concentration of Fe and Mn and a lower ratio of Mn/Fe. Magnetic measurements on another core from elsewhere also indicated substantial reductive dissolution of iron oxides. In conjunction with the results of heavy metal analysis, it was suggested that the dissolution of iron oxides had a direct effect on the cycling of heavy metals. Therefore, magnetic measurements may provide useful information as to early diagenesis within intertidal sediments, which greatly influences the behavior of heavy metals in coastal environments.     

Aminotetryls: Synthesis,spectral characterization,thermal decomposition and explosive properties

This paper describes the synthesis and spectral investigations of two amino derivatives of N-methyl-N-(2,4,6-trinitrophenyl)nitramine (tetryl). Also discussed are the results from thermal decomposition studies on the three explosives, viz. tetryl, 3-aminotetryl (3 AT) and 3,5-diaminotetryl (3,5 DAT) and preliminary work on the explosive properties of the last two compounds. The aminotetryls have been prepared by the amination of the corresponding chlorotetryls. The yield was 87% for 3 AT, but was only 33% for 3,5 DAT, probably due to steric crowding around the benzene nucleus. The mass spectra show interesting differences in the electron impact fragmentation patterns of the three tetryls with the M⁺ ion relative intensities following the order 3,5 DAT > 3 AT > tetryl, which could be due to (a) resonance stabilization and (b) hydrogen bonding effects. Evidence for the latter is also found in the infrared spectra of these compounds. Arrhenius kinetic parameters derived from thermal decomposition studies of the three compounds are presented and show that 3,5 DAT is thermally less stable than 3 AT. Explosive sensitiveness tests indicate that the diamino compound is the most sensitive, the trend being 3,5 DAT > 3 AT > tetryl. This is contrary to the generally found desensitizing influence of NH₂ groups on the thermal stability and explosive sensitiveness of trinitroaromatic energetic molecules. Mechanisms to account for the observed thermal decomposition behaviour and explosive sensitiveness patterns are discussed.     

Multiphoton Physics

Abstract

We discuss recent developments in the generation of ultra-intense laser pulses and show how these can be used to study matter in the presence of electric fields that compete with that due to the nucleus. This has led to a very rapid growth in a wide range of multiphoton studies, many of which are represented in this volume.     

The Development of a Spacer Layer Imaging Method (SLIM) for Mapping Elastohydrodynamic Contacts

Optical interferometry has proved to be a valuable experimental tool in the study of elastohydrodynamic lubrication (EHD). It is a technique that gives detailed information on the lubricant film distribution within the contact; however, the sensitivity is limited and it is only recently, with the development of the spacer layer optical technique, that the study of the thin film lubrication regime has been possible. The limitation of the spacer layer technique is that generally only one measurement is taken from the center of the contact. The next logical step in the development of this technique is, therefore, a system that combines the mapping capabilities of the original optical method with the thin film capabilities of the spacer layer approach.

This paper describes the development of a contact mapping technique that uses the spacer layer approach to visualize, and measure, thin lubricant films in concentrated contacts. The development of the technique is described and its application to both static and moving contacts reported. Thin EHD films (down to 10 nm) have been measured and mapped.