Nd_2(Fe_(0.9)Si_(0.1))_(14)B的中子衍射研究SCIEI

本文用中子衍射对Nd_2(Fe_(0.9)Si_(0.1))_(14)B在室温及77K进行了测量,用衍射峰的形状分析法进行了数据拟合。结果表明,在室温,Si择优占据4c,8j_1及16k_2晶位;Nd与Fe的磁矩平行于C轴排列。在77K,Si仍择优占据上述三个晶位。算得的Nd磁矩的方向偏离C轴37.8°。     

双作用变量叶片泵自动控制系统的机理分析

文章介绍了一种双作用变量叶片泵自动控制系统,通过电脑控制变频器,改变叶片泵转速,达到粗调目的;电脑控制电液数字阀,起微调作用.蓄能器的利用,进一步增了系统的稳定性.     

粉末冶金钛合金的制备

钛合金性能优异．但不易对其进行机加工。粉末冶金已成为生产钛合金复杂形状零件的合适工艺。本文综述了采用传统粉末冶金方法和金属注射成形方法生产钛合金的工艺过程。     

金属板料成形数值模拟的研究现状

本文对板料成形数值模拟的几个主要研究方向 :有限元算法、接触与摩擦、成形极限图、缺陷等的研究现状进行了介绍 ,并且讨论了板料成形数值模拟今后的研究方向     

Laser-induced fluorescence (LIF) studies of liquid-liquid flows. Part I: Flow structures and phase inversion

A non-intrusive dye tracing technique, laser-induced fluorescence (LIF), has been applied to investigate the co-current flow of two immiscible organic-aqueous liquid flows in a vertical pipe. This technique allowed detailed visualization of the dynamic evolution of the flows. Flow structures in liquid-liquid flows at high dispersed phase fraction were revealed which had not been seen before. In pipe flow, an unstable range was found in the flow pattern map in which oil-in-water (o/w) and water-in-oil (w/o) dispersions could co-exist. Secondary dispersions (o/w/o and w/o/w) were observed for most volume fractions and velocities, especially in the unstable range. It was observed that, when the flow is in the unstable region, both w/o/w and o/w/o secondary dispersions could appear in the same set of experiments. It was found that this unstable range in the pipe flow, in spite of the similar appearance, was different to the ambivalent range seen in agitated systems. The one-dimensional drift flux model of Wallis (1969) for dispersed flow and a laminar model for co-current downward annular flow, were also applied to predict the in situ oil holdup; good agreement was obtained.     

厌氧膜生物反应器在废水处理中的研究进展

厌氧膜生物反应器是一种处理高浓度有机废水的有效工艺.综述了厌氧膜生物反应器的特征,在工业废水处理中的应用以及低温下厌氧处理低浓度废水的效果,并展望了厌氧膜生物反应器的应用前景.     

Processabilities and mechanical properties of surlyn-treated starch/LDPE blends

The esterification of the hydroxyl group of starch with DuPont Surlyn was considered as pretreatment method of starch before blending with polyolefins. In treating starch with Surlyn, two different raction conditions were taken to optimize reaction conditions. First, the esterification reaction was carried out in 110°C xylene with oleic acid as a catalyst. Second, the reaction out in a 90°C mixture of deionized water and xylene with ceric ammonium nitrate(CAN) as an initiator. Starch granules would be swollen above the gelatinization temperature in water. In both cases starch was midified by Surlyn to have good compatibility with low-density polyethylene (LDPE). The mechanical and theological properties were examined for blends of the treated starch and LDPE. This system may be one of the biodegradable polymer blends that sufficiently retain properties as a packaging film.     

高性能环氧树脂涂料的研制

以甲基丙烯酸、丙烯酸丁酯及苯乙烯的聚合为接枝体，在过氧化苯甲酰作用下对E-51环氧树脂进行接枝改性，同时对三乙烯四胺进行曼尼希改性，制得多种改性固化剂，并用其与改性的环氧树脂配制成涂料，实验结果表明，当苯酚、甲醛和三乙烯四胺的物质的量比为3：3：1时固化剂的固化性能最好。     

193nm光刻胶的研制

从主体树脂的结构设计、单体的合成工艺、主体树脂的合成工艺、光致产酸剂的评价、配方研究等多个方面论述了193nm光刻胶的研制工艺，合成出了多种适用的单体及多种结构的主体树脂，进行了大量的配方研究，筛选出了最佳配方．研制出的样品经美国SEMATECH实验室应用评价其最佳分辨率为0．1μm，最小曝光量为26mJ／cm^2，不但具有优异的分辨率和光敏性，而且还具有良好的粘附性和抗干法腐蚀性．     

陕北无定河流域土壤侵蚀与植被覆盖和降雨关系研究

基于2000—2014年陕北无定河流域日降水、DEM、土壤类型、MODIS NDVI等数据,利用修正通用土壤流失方程(RUSLE)估算了流域土壤侵蚀情况,定量分析了植被覆盖和降雨在土壤侵蚀中的作用,结果表明:(1)无定河流域土壤侵蚀以微度侵蚀为主,平均占流域面积的88.35%,各土壤侵蚀等级面积比例随等级的升高而降低。2000—2014年微度侵蚀面积比例为下降趋势,轻度及以上等级面积比例均为上升趋势。(2)不考虑降雨因子影响时,无定河流域仍以微度侵蚀为主,且为增加趋势,而其他土壤侵蚀等级均为下降趋势。不考虑植被覆盖因子时,流域土壤侵蚀与模型计算结果的变化趋势基本一致。(3)植被覆盖对土壤侵蚀面积比例和变化速率的贡献率分别为13.67%和24.55%,而降雨作用达到86.33%和75.44%,表明降雨是流域土壤侵蚀的主要动力和控制因子,降雨变化主导着流域土壤侵蚀变化过程。