Thermal storage efficiencies of two solar saltless water ponds

A comparative study between two types of solar ponds is presented. The first type has its free surface covered by a thin layer of transparent paraffin oil. The second type is covered by transparent glass floating devices. Each device disposes an air-vacuum chamber. The free water surface between these devices is covered by transparent paraffin oil also. The thermal storage efficiency of each pond is estimated during two time periods: between sunrise and sunset and from midnight to midnight. The calculated efficiency between sunrise and sunset corresponds to the average transmittance–absorptance product. This is estimated using linear regression and also a maximum likelihood identification technique. The behavior of the system was studied by solving numerically the heat transfer equations of the system. Also an ARMAX (AutoRegressivie Moving Average with eXogenous signal) model allowing the assessment of its performance was presented. This efficiency is larger for the first pond during the sunrise to sunset period and smaller when calculated from midnight to midnight. Thus, the first type of pond could be preferred for a use just after the sunset of the same day, while the second for use after one or more days of heat storage.     

Static and pulsed pressures measured using electrically conducting rubbers

A method of measuring static and pulsed pressures using electrically conducting rubber sensors is proposed. The method is based on a change in the volume resistivity of a filled rubber under the action of external pressure. The pressure-induced change in resistance of the rubber sensor is proportional to the applied pressure and can be measured by a bridge circuit. Using this method, it is possible to evaluate the degree of homogeneity of the pressure distribution over a solid surface. This is achieved by distributing rubber sensors over the given surface.     

Development of Free-Electron x-Ray Lasers on the TESLA Test Accelerator (DESY, Germany)

The program for developing free-electron x-ray lasers at TESLA started in 1994. The plan is to use the TESLA test accelerator to develop an x-ray laser with minimum wavelength 0.1–6 nm. The first phase of the project was successfully completed in 2001. At saturation, the laser produces ultrashort 30–100 fsec, gigawatt, radiation pulses. The wavelength can be tuned smoothly over the range 80–120 nm.     

Simulation of the Accelerating Systems of Cyclotrons for Applications

The results of a comparative numerical investigation of three types of resonator systems of a cyclotron for acceleration of negative hydrogen and deuterium ions up to maximum energy 30 and 15 MeV, respectively, are presented. It is shown that a vertical system with two half-wave resonators excited in-phase has the smallest active losses and the smallest differential of the amplitude of the accelerating voltage along the edge of the dees and is effective for accelerating particles at dual working frequencies.     

Catalytic reduction of N2O with CH4 and C3H6 over Ag–Rh/Al2O3 bimetallic catalyst in the presence of oxygen

A study of nitrous oxide (N₂O) reduction with methane (CH₄) and propene (C₃H₆) in the presence of oxygen (5%) over Ag/Al₂O₃, Rh/Al₂O₃ and Ag–Rh/Al₂O₃ catalysts, with Ag and Rh loadings of 5 wt% and 0.05 wt% respectively, has been performed. From the results, it was observed that the Ag–Rh bimetallic catalyst was the most active for both nitrous oxide removal (more than 95%) and hydrocarbon oxidation. This high activity seems to be connected with a synergistic effect between Ag and Rh. The findings from X‐ray diffraction and X‐ray photoelectron spectroscopy studies showed also, that there were no strong interactions (eg alloying) between Ag and Rh. Copyright © 2005 Society of Chemical Industry     

Use of the Precipitation Method in the Synthesis of Ceramic Pigments

The results of the synthesis of ceramic pigments using coprecipitation of hydroxides and difficultly soluble salts of multivalent metal ions are described. The specifics of the coprecipitation process and the effect of various factors on the production of the initial precipitates for subsequent synthesis of ceramic pigments are analyzed. The technology of pigment production is described. __________ Translated from Steklo i Keramika, No. 6, pp. 37 – 39, June, 2005.     

The Metaflow architecture

The Metaflow architecture, a unified approach to maximizing the performance of superscalar microprocessors, is introduced. The Metaflow architecture exploits inherent instruction-level parallelism in conventional sequential programs by hardware means, without relying on optimizing compilers. It is based on a unified structure, the DRIS (deferred-scheduling, register-renaming instruction shelf), that manages out-of-order execution and most of the attendant problems. Coupling the DRIS with a speculative-execution mechanism that avoids conditional branch stalls results in performance limited only be inherent instruction-level parallelism and available execution resources. Although presented in the context of superscalar machines, the technique is equally applicable to a superpipelined implementation. Lightning, the first implementation of the Metaflow architecture, which executes the Sparc RISC instruction set is described     

Transformational approach to program concretization

This paper focuses on the problem of program concretization by applying correctness-preserving transformations of annotated programs. According to the approach presented, a general-purpose program can be annotated by known information about a specific context of its applications and correctly transformed into a specialized program which is equivalent to the original one on the context-defined ranges of inputs and outputs and is better than it by quality criteria given by the context. Tools for program concretizations via annotated program transformations are considered.