Large-scale solution-phase growth of Cu-doped ZnO nanowire networks

Film-like networks of Cu-doped (0.8-2.5 at.%) ZnO nanowires were successfully synthesized through a facile solution process at a low temperature (<100 degrees C). The pH value of solution plays a key role in controlling the density and quality of the Cu-doped ZnO nanowires and the dopant concentration of ZnO nanowires was controlled by adjusting the Cu2+/Zn2+ concentration ratio during the synthesis. The structural study showed that the as-prepared Cu-doped ZnO nanowires with a narrow diameter range of 20-30 nm were single crystal and grew along [0001] direction. Photoluminescence and electrical conductivity measurements showed that Cu doping can lead to a redshift in bandgap energy and an increase in the resistivity of ZnO. The thermal annealing of the as-grown nanowires at a low temperature (300 degrees C) decreased the defect-related emission within the visible range and increased the electrical conductivity. The high-quality ZnO nanowire network with controlled doping will enable further application to flexible and transparent electronics.     

Interface effect of magnetic properties in Ni nanoparticles with a hcp core and fcc shell structure

We have fabricated hexagonal close-packed (hcp) Ni nanoparticles covered by a face-centered cubic (fcc) Ni surface layer by polyol method. The magnetic properties have been investigated as a function of temperature and applied magnetic field. The magnetic behavior reveals that the system should be divided magnetically into three distinct phases with different origins. The fcc Ni phase on the shell contributes to the superparamagnetism through a wide temperature range up to 360 K. The hcp Ni phase at the core is associated with antiferromagnetic nature below 12 K. These observations are in good agreement with the X-ray absorption spectroscopy and magnetic circular dichroism measurements. In our particular case, the unique hcp core and fcc shell structure gives rise to an additional anomaly at 20 K in the zero-field-cooled magnetization curve. Its position is barely affected by the magnetic field but its structure disappears above 30 kOe, showing a metamagnetic transition in the magnetization versus magnetic field curve. This new phase originates from the magnetic exchange at the interface between the hcp and fcc Ni sublattices.     

Interaction of antiparallel transverse domain walls in ferromagnetic nanowires

The interaction of antiparallel transverse domain walls in ferromagnetic nanowires was investigated via micromagnetic simulation with systematic variations of the external field strength as well as the wire thickness. The interaction of antiparallel transverse walls after domain wall collision exhibited damped multiple collisions due to the rigid structure of the antiparallel transverse walls. The detailed process during the multiple collisions was analyzed via the Fast Fourier Transform technique, along with a careful examination of the inner spin structures of the colliding domain walls. It was found that a frequency peak of multiple collisions shifted to a higher peak position as the external field strength increases. With a stronger field strength of around a few hundred mT, it was found that two antiparallel transverse walls were finally annihilated with formation of complex antivortex structures.     

Surface passivation of CeO2 catalyst and its ultraviolet screening effect

A new strategy was attempted to fabricate CeO2 nanoparticles using the surface fluorination technique to control the particle size and suppress the catalytic activity. The fluorinated CeO2 nanoparticles are fully characterized with XRD, XANES, UV-vis spectroscopy, HR-TEM, XPS along with the evaluation of photo and thermal catalytic activities. XRD patterns were not affected by surface fluorination. That is to say, the crystalline structure of CeO2 was not deteriorated upon fluorination. The TEM analysis showed that the fluorinated CeO2 nanoparticles with the primary particle size of 7 nm could be prepared. According to the X-ray absorption near edge structure (XANES) analysis, overall XANES spectrum was not changed upon fluorination, suggesting that the local structure of fluorinated CeO2 resembled that of the starting CeO2 nanoparticles. It was also revealed that both photo and thermal catalytic activities could be almost totally suppressed at the fluorination level of ca. 6.0 wt%. It is suggested that the selective surface fluorination with fluoride could lead to fluorinated CeO2 nanoparticles, which could be applied to new fields such as the cosmetics industries.     

Effect of support size on the catalytic activity of metal-oxide-doped silica particles in the glycolysis of polyethylene terephthalate

Zinc oxide (ZnO) and cerium oxide (CeO2) nanoparticles were deposited on the surface of preformed silica spheres with diameters ranging from 60 to 750 nm. Ultrasonic irradiation was employed to promote the deposition of the metal oxide nanoparticles on the surface of silica. Silica-supported zinc oxide or cerium oxide was used as a catalyst in the glycolysis of polyethylene terephthalate, one of the key processes in the depolymerization of polyethylene terephthalate. The effect of the support size on the catalytic activity was studied in terms of monomer yield, and the monomer concentration was analyzed via high-performance liquid chromatography (HPLC). The morphologies and surface properties of the catalysts were characterized using a scanning electron microscope, a transmission electron microscope, and a BET surface area analyzer, while the monomer was characterized via HPLC and nuclear-magnetic-resonance spectroscopy. Both the zinc oxide and cerium oxide deposited on a smaller support showed better distribution and less aggregation. The high specific surface area of the smaller support catalysts provided a large number of active sites. The highest monomer yield was obtained with a catalyst of 60-nm silica support.     

Surface property change of C doped TiO2 nano-pillars by O2 plasma treatment

TiO2 surface is led to super-hydrophilic surface by modifying to hydroxyl group. The super-hydrophilic surface can be applied to anti-fogging, because of preventing formation of water droplet on the surface. Super-hydrophilic coatings are made of metal oxides, polymers, or their mixtures. In this study, columnar-structured C doped TiO2 nano-pillars were grown on glass substrates by MOCVD method. For change of surface properties, grown columnar-structured C-TiO2 nano-pillars were treated by oxygen plasma. After oxygen plasma treatment, the surface property of grown columnar structured C-TiO2 nano-pillars changed from hydrophobic surface to super hydrophilic surface. For determination of this mechanism, scanning electron microscopy (SEM), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), FT-IR spectroscopy, and contact angle analyzer were employed.     

Role of O2/Ar mixing ratio on the performances of IZO thin film transistors fabricated using a two-step deposition process

In this study, a simple method of fabricating a thin-film transistor (TFT) with a double-layered channel using indium–zinc-oxide (IZO) films was proposed. Two IZO films used as channel layers were consecutively deposited via sputtering without stopping the vacuum and only by changing the volumetric fraction of the additive O₂ gas during the deposition. Time-of-flight secondary ion mass spectrometry (ToF-SIMS) analysis showed a large difference in the depth profiles of the InO^? and InO₂^? ions between the two IZO layers. Compared to the conventional single-IZO-channel TFT, the double-IZO-channel TFT that was fabricated using the proposed two-step deposition method showed greatly improved electrical characteristics: the on/off-state current ratio was increased from 1.30 × 10⁵ to 1.03 × 10⁶, and the field effect mobility was enhanced from 1.2 to 9.3 cm²/Vs.     

Enhanced dielectric and piezoelectric properties of low-temperature processed Pb(Zr,Ti)O3 thick films prepared by hybrid deposition technique with chemical solution infiltration process

High quality PZT thick films over 10 μm were successfully prepared using a chemical solution infiltration into the porous screen-printed PZT thick films. The hybrid films prepared with solution infiltration process showed very dense and uniform microstructure with large grain size at a low annealing temperature such as 700 °C. The hybrid films showed markedly enhanced electrical properties. The measured dielectric constant, the remanent polarization and the piezoelectric d₃₃ coefficient of the films were 1900, 27 μC/cm², and 230 pC/N, respectively, which were over two times higher than those of the screen printed films without the solution infiltration process.     

Novel SrCo1 − 2x(Fe,Nb)xO3 − δ (x = 0.05, 0.10) oxides targeting CO2 capture and O2 enrichment: Structural stability and oxygen sorption properties

The novel Fe/Nb co-doped SrCo_1 ? 2x(Fe,Nb)_xO_3 ? δ (x = 0.05, 0.10) perovskite oxides were synthesized by the solid-state method. Structural and chemical stability of the SrCo_1 ? 2x(Fe,Nb)_xO_3 ? δ (x = 0.05, 0.10) oxides were studied by differential scanning calorimetry (DSC), thermogravimetric analysis (TG) and X-ray diffraction (XRD). The results demonstrated that the structural and chemical stability of the Fe/Nb co-doped SrCo_1 ? 2x(Fe,Nb)_xO_3 ? δ (x = 0.05, 0.10) is improved significantly. The oxygen sorption properties of the SrCo_1 ? 2x(Fe,Nb)_xO_3 ? δ (x = 0.05, 0.10) oxides were investigated between 300–900 °C in air, and the high oxygen sorption capacity of 11.5 and 10.3 mL O₂ (STP)/g oxide, respectively, are obtained.     

Silica nanoparticles with enlarged nanopore size for the loading and release of biological proteins

Silica nanoparticles (SNs) with a nanoporous structure are attractive for the delivery of biomolecules. This study developed a SNs-based protein delivery system with nanopore sizes large enough to uptake protein molecules. The use of trioctylmethylammonium bromide (TOMAB) as an auxiliary chemical facilitated a dramatic increase in pore size from 2.6 nm to 17.4 nm. The surface was highly negatively-charged with a zeta potential of approximately ? 35 at pH 7. Positively-charged protein cytochrome C was encapsulated effectively within the large pore spaces of the SNs, with a protein loading capacity of almost 2-fold increase due to the pore size increase. The loaded protein exhibited sustained release for approximately one week with an initial burst in a day, suggesting the SNs tailored with enlarged nanopores should be useful for the delivery of large protein molecules for tissue regeneration.