X-ray electron spectroscopic investigation of the structure of double lead silicate glasses

The method of x-ray electron spectroscopy is used to investigate lead silicatexPbO(1 -x) · SiO₂ (x - 0.3, 0.4, 0.5, 0.55, 0.667) glasses. The concentration dependences of the spectra of inner Pb4f, Si2p, and Ols levels led to the conclusion that for low contents of PbO, lead is present in the glass in the form of modifying ions, whereas in high concentrations, it plays the role of glass former. Restructuring in the glass occurs for about 50% molar concentration of PbO. The Pb - O bond in the glass is more ionic than in PbO. With an increase in the PbO content in the glass, the Pb - O bond becomes closer to that of lead monoxide, i.e., is more covalent.     

ATMOSPHERIC DEPOSITION OF CHEMICAL SPECIES TO POLAR SNOW

Particles and gases can deposit from the atmosphere to polar snow by several mechanisms. Dry deposition can be considered to consist of three steps: aerodynamic transport from the free atmosphere to the viscous sublayer near the surface, boundary layer transport across the sublayer, and interactions with the surface. The particle dry deposition mass flux is dominated by the largest particles present in a size distribution. Wet deposition includes in-cloud and below-cloud scavenging, where the former refers to uptake of particles during nucleation of cloudwater as well as scavenging of particles and gases by existing droplets and ice crystals. Of all the wet deposition mechanisms, nucleation scavenging is often the most important mechanism for particles in the polar regions. Finally, incorporation of particles and gases into fog droplets and subsequent settling of the fog to the snow surface can be an important removal process in regions of frequent fog. For Summit, Greenland, the total deposition of MSA, SO₄^2-, Na⁺, K⁺, and Ca²⁺ during May 24-July 13, 1993 was dominated by wet deposition: this mechanism accounted for an average of 62% of the total deposition for these species. Fog and dry deposition accounted for 21% and 17% of the total, respectively. These results suggest that all three mechanisms may need to be considered when estimating total deposition of certain chemical species to polar snow.     

Regeneration of active carbons saturated with caprolactam

Low- and medium-temperature regeneration of active carbons saturated with caprolactam was investigated in regenerating medium (nitrogen, vapor–gas mixture) and without it. The optimum conditions of conducting the process were determined. The results of laboratory studies of thermal regeneration of active carbons were confirmed in experimental-industrial tests.All-Union Scientific-Research Institute of Synthetic Fibres, Tver'. Translated from Khimicheskie Volokna, No. 2, pp. 43–47, March–April, 1995.     

Minimum-phase filter design from linear-phase startpoint viabalanced model truncation

A new practical design approach for minimum-phase FIR or IIR filters, setting out from a high dimensionality FIR linear-phase prototype is described. The novelty of this technique lies in overcoming the inherent problem of finding the roots of a high order polynomial with repeated and/or very closely clustered roots     

Variation of the creep limit and structure of a welded joint in PT-3V titanium alloy under the effect of cyclic loading. Report 2

Comparative analysis of the characteristics of amplitude-dependent internal friction (IF) was carried out to explain reasons leading to an increase of the creep limit of the butt welded joint in PT-3V titanium alloy (PT-2V filler material) after cyclic loading. IF was measured by the method of the direct torsional pendulum on cylindrical specimens representing the gage part of the specimens subjected to preliminary cyclic loading. The data were processed using the Granato-Lucke theory. The results show that the reduction of IF after cyclic loading took place as a result of an increase of the number and redistribution of pinning points of the dislocations. Consequently, the density of mobile dislocations decreases by 8% and the length of dislocation segments by 18%. These processes of stabilization of the structure were completed within 5·10 ⁴ cycles of preliminary loading. Stabilization of the dislocation structure of the material of the welded joint increases its creep limit.Translated from Problemy Prochnosti, No. 4, pp. 35–40, April, 1996.     

Experience in High-Temperature Thermomechanical Treatment with Helical Reduction in the Production of Axisymmetric Parts

Metal Science and Heat Treatment -