Features of penetrating obstacles made of combined materials with strikers of different shape

Results of ballistic tests for obstacles made of combined materials in relation to striker shape are presented in the form of penetration curves. It is established that striker shape affects not only quantitative indices, but also the qualitative nature of these curves.Translated from Problemy Prochnosti, No. 1, pp. 60–62, January, 1992.     

Enhancement of heat and mass transfer in a plane channel with turbulizers on one of the walls

The effect of turbulizing asperities positioned on one of the walls of a plane channel on the intensity of exchange processes near a smooth wall with injection of different working media is studied experimentally. Translated from Inzhenerno-Fizicheskii Zhurnal, Vol. 70, No. 3, pp. 404–408, 1997.     

Effect of Bi and Sr concentrations on the formation of the 2223 phase in Bi-Pb-Sb-Sr-Ca-Cu-O materials, obtained under different conditions of thermal treatment

The superconducting properties and the phase and chemical composition of Bi _x Pb_0.3Sb_0.1Sr _y Ca₂Cu₃O_z (x=1.5, 1.6, and 1.7;y=1.9, 2.0, and 2.1) materials synthesized by one-step and multistep thermal treatments have been investigated. The multistep annealing between 825–875°C promotes the 2223 phase. The change of Bi concentration has little effect on the 2223 phase formation, regardless of the kind of thermal treatment used, but increasing the Sr concentration (y> 2) strongly inhibits this phase. It has also been established that the loss of Pb after synthesis depends on the initial Bi concentration. The loss of Pb decreases when the initial Bi content is lower.     

Structural studies of TiN/ZrN multilayer coating deposited by physical vapour deposition

Multilayer coatings have been produced using unbalanced magnetron physical vapour deposition in which discrete layers of TiN and ZrN were co-deposited. It has been shown that the multilayers exhibited two-fold periodicity having values of 13 and 2.8 nm. This periodicity, measured both by cross-sectional transmission electron microscopy and low-angle X-ray diffraction, has been precisely related to the process parameters used. Analysis has shown that a third, previously unreported, phase existed within the coating having a lattice parameter comparable to that of TiN and a well-defined orientation relationship with the primary phases. The existence of this phase has been explained in terms of variations in the stoichometry of the coating due to non-uniform metal to nitrogen deposition rates within the chamber. Textural studies revealed that preferred orientation existed in the coating; the degree of which was greater in the ZrN layers than the TiN layers.     

Movement stability analysis of a pipe string in a thixotropic fluid

Features of movement of a drill pipe string in a well filled with a thixotropic fluid are analyzed taking into account inertial and elastic forces of the rope system. It is shown that processes of fluid structure degradation can lead to nonstationary movement of the pipes. In this case periodic and chaotic auto-oscillations are excited in the system.Bashkir State University, Ufa, Russia. Translated from Inzhenerno-Fizicheskii Zhurnal, Vol. 66, No. 4, pp. 405–411, April, 1994.     

Kinetic model for water/oil absorption of mesquite gum (Prosopis juliflora) and gum arabic (Acacia senegal)

The water and oil uptake of mesquite and arabic gums in powdered form was studied at temperatures of 23, 35 and 45°C. A previously proposed equation to predict osmotic equilibrium was tested using the experimental data with both gums and a good statistical fit was obtained. Mesquite gum showed the highest water and oil absorption at all temperatures studied. Temperature dependence of the reciprocal of the S₁ and WL_∞ were determined using an Arrhenius equation. The activation energy for water and oil absorption for gum arabic was 21.98 and 39.57 kJ mol⁻¹, compared to that of mesquite gum having values of 15.79 and 46.16 kJ mol⁻¹, respectively. A second order kinetic model was obtained for water and oil absorption for both gums.     

Polymorphous low-grade adenocarcinoma of the parotid salivary gland

Polymorphous low-grade adenocarcinoma is an unusual tumor that has been described as occurring in the minor salivary glands, particularly of the palate. To our knowledge, there is only one previous report that has documented the occurrence of this type of lesion in the major salivary glands. We describe an elderly patient with polymorphous low-grade adenocarcinoma arising in the parotid gland that was originally diagnosed as carcinoma ex pleomorphic adenoma.