Heptadecapeptide gastrin: measurement in blood by specific radioimmunoassay

The characteristics are described of an antibody (designated L6) which has virtually absolute specificity for heptadecapeptide gastrin. This antibody binds G17, but does not bind peptide fragments or molecular forms of gastrin comprising G17 with either amino acid deletions, or additions, at the carboxyl- and amino-terminals. In serum from patients with Zollinger-Ellison syndrome the only form of gastrin revealed by L6 was compatible with G17, and there was good agreement between estimated G17 concentrations in serum analyzed by gel filtration and by direct radioimmunoassay using L6. Using L6 in conjunction with antibodies specific for carboxyl- and amino-terminals of G17 it has been possible to measure concentrations of different forms of gastrin in serum of normal subjects after a meal in greater detail than previously possible. After a light meal consisting of eggs, toast, and Oxo, serum concentrations of G17 measured by L6 increased to a peak 20 min after feeding (delta gastrin, 19 pmoles per liter; n = 17). In contrast, concentration of G34 peaked at 50 min (delta gastrin, 27 pmoles per liter). Small amounts of amino-terminal fragments of G17 were present throughout the digestive period. Applying the known ratio of biological potencies of G34 and G17 for stimulation of acid secretion in man, it is estimated that G17 accounts for about 75% of the biological activity in blood after a meal, even though G34 is present in higher molar concentrations.     

Performance analysis of the IEEE 802.16e power management for the initiations of awakening

To increase battery life in IEEE 802.16e systems, it is essential to efficiently manage energy in mobile stations. The sleep-mode operation in power management helps to increase the life of a station by saving energy consumption. In power management, there are two important performance metrics energy consumption and the response delay of awakening medium access control (MAC) service data unit (SDU). While in a base station (BS) initiation of awakening, the two performance metrics should be simultaneously considered, in a mobile subscriber station (MSS) initiation of awakening, the response delay is not considered because it is self-operational. There performance metrics are affected by the minimum sleep interval (Tmin), the maximum sleep interval (Tmax), and the average interarrival time of awakening MAC SDUs (TI) during sleep-mode operation. Therefore, it is imperative to evaluate the two initiations of awakening depending on TI. To reach a fuller understanding of the performance, this paper shows an analytical mode and simulations results for the standard sleep-mode operation in the IEEE 802.16e MAC.     

Torsional vibration analysis of lathe spindle system with unbalanced workpiece

For the purpose of analyzing the torsional vibration caused by the gravitational unbalance torque arisen in a spindle system when it is machining heavy work piece, a 10-DOF lumped parameter model was made for the machine tool spindle system with geared transmission. By using the elementary method and Runge-Kutta method in Matlab, the eigenvalue problem was solved and the pure torsional vibration responses were obtained and examined. The results show that the spindle system cannot operate in the desired constant rotating speed as far as the gravitational unbalance torque is engaged, so it may cause bad effect on machining accuracy. And the torsional vibration increases infinitely near the resonant frequencies, so the spindle system cannot operate normally during these spindle speed ranges.     

基于动态特性的剑杆织机共轭凸轮开口机构的设计方法

重新建立了共轭凸轮开口机构的动力学模型,组成相应的弹性振动微分方程.用矩阵摄动法分析该微分方程,并设计织机的开口机构.与传统的求解方法相比,计算时间减少20%,减小综框的振动以及降低断纬频率达到65%以上.     

基于经验模态分解和神经网络的微网混合储能容量优化配置

提出一种针对独立微网的超级电容/蓄电池混合储能系统(HESS)的容量优化方法。运用经验模态分解技术,将一段记录完全的非平稳风功率分解成为若干固有模态函数(IMF)。在各固有模态函数的瞬时频率—时间曲线的基础上,通过"分频频率"将原始风功率分解成高频与低频2部分,并分别采用HESS中的超级电容和蓄电池来平抑风功率的高频、低频波动分量。平抑后输入负荷侧的功率平滑度可通过平滑度指标量化。采用神经网络模型优化HESS的容量,通过成本和平滑度指标之间的折中实现HESS的容量优化配置。基于某风电场实测数据的仿真实验验证了所提方法的有效性。     

Shop-floor scheduling at shipbuilding yards using the multiple intelligent agent system

The intelligent agent system has become a typical approach to research distributed artificial intelligence and distributed problem solving. However, despite its various technical advantages, the distribution and expansion of the intelligent agent system approach has been limited because existing methodologies rely on specialized applications and therefore require intensive investment to develop new systems. In an attempt to conquer these difficulties, a standardized methodology to construct intelligent agent systems is proposed. This approach deviates from current agent system approaches of repeatedly constructing new and customized expert systems. Specifically, it provides an economical method for developing intelligent agent systems by investigating the possibility of standardizing message communication protocols in linguistics speech-act theory and by supplementing traditional algorithmic systems with intelligent segments using, among others, expert system tools. To verify effectiveness, the shop-floor scheduling system of a large-scale shipbuilding yard has been redesigned, developed, and tested using this approach. This shop-floor scheduling system requires the scheduling of when and where to process block construction under various constraints. It is a difficult four-dimensional time and space allocation problem involving traditional NP-complete search spaces. The tested intelligent agent system proposes an innovative method for reducing the search space into three levels: the algorithm level, the agent intelligence level, and the level of cooperation among agents. It also provides methods for solving deadlock occurrence and non-uniformity problems resulting from parallel processing. Test results demonstrate applicability and economy, among other technical advantages.     

固体氧化物燃料电池离子- 电子混合传导性Ni/ScSZ 燃料极的制备以及性能分析

在薄膜固体氧化物燃料电池中,为增加发生电化学反应的三相界面面积,燃料极和空气极通常制备成离子-电子混合传导性质的多孔形态。该研究将燃料极电化学反应(氢氧化反应)的催化剂——镍(Ni)和氧离子传导性好的氧化钪稳定的氧化锆(ScSZ)混合制备成离子-电子混合传导燃料极。实验结果显示,与纯 Ni 燃料极相比,所制备的 Ni/ScSZ 燃料极因其三相界面面积的增加,可显著降低极化电阻,但同时欧姆电阻也显著增加,从而最终导致燃料电池单池性能总体下降。