A criterion for low-stress brittle fracture of notched specimens based on combined micro- and macro fracture mechanics—1

Based on the combined micro- and macro fracture mechanics, the two requisites necessary for the crack propagation, that is, the energy unstable requisite and the critical local stress requisite, are derived for the low-stress brittle fracture of notched specimens. Thus the fracture criterion was obtained. The criterion is compared with the experimental data, such as on the relationships between the fracture stress or the fracture toughness and the grain size diameter, the crack length, the notch tip radius or the yield stress. The good agreement is obtained.     

Super environment-friendly electrodeposition paint

Super low VOC due to new composition/reaction mechanism can minimize the environmental risk as it does not contain lead and tin, hazardous air pollutants (HAPs) and endocrine disrupters (EPA/67 items, SPEED’98/JEA/67 items) currently specified as contaminants. New EAD (electrolyzed activate deposition paint) is not the only conventional cure agent or solvent, but also the super low VOC, HAPs materials and endocrine disrupters. The electric energy used by EAD is utilized for the reaction but not for the deposition. EAD consists of two technologies. One is propargyl group change to the allene by using electrodeposition. Propargyl group is stable, but allene group is highly polymerizing. As a result, EAD had high bath stability. The other is sulfonium change to sulfide by using electrodeposition. This sulfonium salt is lost as a result of the electrolytic reduction, and hence can be irreversibly rendered non-conductive. As a result, EAD showed high throwing power.     

Quantitative evaluation of perceived whiteness based on a color vision model

This article describes a new perceived whiteness index, C/V index, which focuses on the brightness‐enhancement effect of color components included in the spectral reflectance factor distribution of approximate white objects or in the spectral power distribution of illuminations. The index is developed on the basis of a color vision model. The perceived whiteness of 18 approximate white samples was evaluated, and then a predictability of the index was compared with 17 types of existing whiteness indices. As a result, the C/V index was one of the indices indicating the best predicting performance. The aforementioned findings show that the C/V index is effective in evaluating the perceived whiteness of approximate white objects and the brightness‐enhancement effect of color components is an important factor in determining the perceived whiteness. © 2009 Wiley Periodicals, Inc. Col Res Appl, 2010     

煤和污泥燃烧和气化过程中汞析出行为的研究

固体燃料和固体废物在燃烧和气化过程中的汞排放问题在全球已经受到广泛关注。该文首先选取3个煤种和3种干城市污泥作为样本，通过热重(TG)实验了解汞在燃烧和气化过程中的基本析出行为。然后选取一个污泥样在滴管炉里燃烧，研究汞在接近实际燃烧状况下的析出行为。通过热平衡计算预测了在和实验相同条件下汞析出的变化趋势。结果表明，污泥燃烧过程中汞的析出行为受到污泥中硫和固定碳含量的抑制，煤燃烧过程中汞的析出行为受到煤中固定碳含量和Cl含量的重要影响。另外，因为单质汞在还原性气氛下极易形成，在气化过程中，即使是低温汞也很快析出。     

Prospective method of lightning protection schemes in distribution system

Grounding wires and enclosed ZnO elements have been incorporated generally in 6.6‐kV distribution systems by TEPCO for the reduction of lightning overvoltages. At present, the reliability to lightning surges is tolerably good. However, the facility of grounding wires is not inexpensive and its maintenance is hard due to corrosion and disconnection in some areas. A typical model simulating TEPCO field adopting enclosed ZnO elements has been developed and we have evaluated relative failure risks systematically according to conditions with and without grounding wires against lightning overvoltages. Two kinds of failures discussed in the paper are the flashover of insulation and the overduty of ZnO elements, and two kinds of induced and direct lightning overvoltages are studied in flashover. The greatest problem with no grounding wire is the increase of ZnO elements' duty, but it was demonstrated that a short partial grounding wire around ZnO elements or the selection of heavier ZnO elements provides a solution. The main objectives of this study are to clarify the relative failure risks systematically according to realistic field conditions, the risk of small stroke currents having long duration to ZnO elements' duty, and countermeasures against ZnO elements' overduty. © 1999 Scripta Technica, Electr Eng Jpn, 127(1): 1–10, 1999     

Electromagnetic wave radiated from an insulating spacer in gas insulated switchgear with partial discharge detection

As a means of diagnosing partial discharge (PD) signals propagate inside a Gas Insulated Switchgear (GIS), a study for the leakage of electromagnetic waves (EM-waves) emitted from the insulating spacer was implemented. The EM-waves leaking out from the solid insulator have the resonance frequencies depend on the spacing between adjacent bolts in the direction of the flange circumference, because the leakage portion is the equivalent of a slot antenna. In this paper, using an electromagnetic analysis model which has a simulated spacer on a concentrically-shaped GIS tank, the output characteristics of the EM-waves that leaked out from the slit were analyzed under various conditions such as the spacing between adjacent bolts, the width of the spacer, the dielectric constant of the spacer and the form of the flange. Also the actual measurement by the experimental equipment used to simulate the model was implemented for comparison with the analytical results. Consequently, the optimal specifications of the sensor and the measurement method used to achieve highly-sensitive detection for practical use were summarized and proposed as well as evaluating the effectiveness of the electromagnetic analysis model adopted in this paper.     

Ex Vivo Expanded and Activated Natural Killer Cells Prolong the Overall Survival of Mice with Glioblastoma-like Cell-Derived Tumors

Glioblastoma (GBM) is the leading malignant intracranial tumor and is associated with a poor prognosis. Highly purified, activated natural killer (NK) cells, designated as genuine induced NK cells (GiNKs), represent a promising immunotherapy for GBM. We evaluated the anti-tumor effect of GiNKs in association with the programmed death 1(PD-1)/PD-ligand 1 (PD-L1) immune checkpoint pathway. We determined the level of PD-1 expression, a receptor known to down-regulate the immune response against malignancy, on GiNKs. PD-L1 expression on glioma cell lines (GBM-like cell line U87MG, and GBM cell line T98G) was also determined. To evaluate the anti-tumor activity of GiNKs in vivo, we used a xenograft model of subcutaneously implanted U87MG cells in immunocompromised NOG mice. The GiNKs expressed very low levels of PD-1. Although PD-L1 was expressed on U87MG and T98G cells, the expression levels were highly variable. Our xenograft model revealed that the retro-orbital administration of GiNKs and interleukin-2 (IL-2) prolonged the survival of NOG mice bearing subcutaneous U87MG-derived tumors. PD-1 blocking antibodies did not have an additive effect with GiNKs for prolonging survival. GiNKs may represent a promising cell-based immunotherapy for patients with GBM and are minimally affected by the PD-1/PD-L1 immune evasion axis in GBM.     

Phase evolution and <110>-orientation mechanism in RTGG-processed BaTiO3 ceramics with electrical properties

The <110>-oriented BaTiO₃ ceramics were fabricated using BaCO₃ matrix and H_1.08Ti_1.73O₄.nH₂O (HTO) template particles, and the mechanism of BaTiO₃ phase formation was investigated. The dielectric, ferroelectric, and piezoelectric properties were also investigated. The transformation of the HTO phase into the TiO₂ bronze or TiO₂ (B) phase was observed at 600°C, where the BaTiO₃ nucleation was accompanied by the formation of a Ba₂TiO₄ phase. The TiO₂ phase reacted with the Ba₂TiO₄ phase at 800°C to give a BaTiO₃ phase, whereas its reaction with the BaTiO₃ resulted in the formation of BaTi₂O₅ phase that got decomposed into BaTiO₃ and Ba₆Ti₁₇O₄₀ phase at sintering temperature ≥1300°C. Sintering with samples’ embedding in BaTiO₃ powders prevented the formation of the Ba₆Ti₁₇O₄₀ secondary phase. The crystallographic orientation along the <110> direction (F₁₁₀) was developed by the epitaxial grain growth mechanism. In addition to the contribution of the grain-size increment for enhancing the F₁₁₀, the preservation of the platelike structure was also found to have a significant impact. The ceramics prepared by the embedded sintering (grain size ≈12.4 µm and F₁₁₀ = 83%) exhibited the room-temperature dielectric constant of 1708 and piezoelectric strain constant of 445 pm/V, which are higher than those of the BaTiO₃ ceramics with randomly oriented grains.