Evaluation of ergonomic adjustments of catering carts to reduce external pushing forces

An existing standard catering cart was compared with two prototypes for pushbar and castor design. The first objective of this study was to find out which cart was accompanied with the lowest manually exerted external forces in pushing in a straight way and in pushing a 90 turn. The second objective was to explore effects of the pushbar and castor design of the carts. In the initial and ending phase, the prototypes were accompanied with higher exerted forces compared with the standard catering cart. In pushing straight. the reversed start position of the bigger castors of the prototypes hampered a fluent acceleration and caused higher initial forces. In decelerating, the lower rolling friction of the bigger castors required higher forces to stop the prototypes compared to the standard cart. During the sustained phase, the prototype carts were more favourable. Effects of pushbar and castor design were studied during a turn. The vertical pushbars of the prototypes resulted in lower time-integrated pushing forces. Providing an axis of rotation for turning activities by means of a fixed wheel was proven to be advantageous.     

Bayesian framework for least-squares support vector machine classifiers, gaussian processes, and kernel Fisher discriminant analysis

The Bayesian evidence framework has been successfully applied to the design of multilayer perceptrons (MLPs) in the work of MacKay. Nevertheless, the training of MLPs suffers from drawbacks like the nonconvex optimization problem and the choice of the number of hidden units. In support vector machines (SVMs) for classification, as introduced by Vapnik, a nonlinear decision boundary is obtained by mapping the input vector first in a nonlinear way to a high-dimensional kernel-induced feature space in which a linear large margin classifier is constructed. Practical expressions are formulated in the dual space in terms of the related kernel function, and the solution follows from a (convex) quadratic programming (QP) problem. In least-squares SVMs (LS-SVMs), the SVM problem formulation is modified by introducing a least-squares cost function and equality instead of inequality constraints, and the solution follows from a linear system in the dual space. Implicitly, the least-squares formulation corresponds to a regression formulation and is also related to kernel Fisher discriminant analysis. The least-squares regression formulation has advantages for deriving analytic expressions in a Bayesian evidence framework, in contrast to the classification formulations used, for example, in gaussian processes (GPs). The LS-SVM formulation has clear primal-dual interpretations, and without the bias term, one explicitly constructs a model that yields the same expressions as have been obtained with GPs for regression. In this article, the Bayesian evidence framework is combined with the LS-SVM classifier formulation. Starting from the feature space formulation, analytic expressions are obtained in the dual space on the different levels of Bayesian inference, while posterior class probabilities are obtained by marginalizing over the model parameters. Empirical results obtained on 10 public domain data sets show that the LS-SVM classifier designed within the Bayesian evidence framework consistently yields good generalization performances.     

Letter position information and printed word perception: The relative-position priming constraint.

Six experiments apply the masked priming paradigm to investigate how letter position information is computed during printed word perception. Primes formed by a subset of the target's letters facilitated target recognition as long as the relative position of letters was respected across prime and target (e.g., "arict" vs. "acirt" as primes for the target "apricot"). Priming effects were not influenced by whether or not absolute, length-dependent position was respected (e.g., "a-ric-t" vs. "arict"/"ar-i-ct"). Position of overlap of relative-position primes (e.g., apric-apricot; ricot-apricot; arict-apricot) was found to have little influence on the size of priming effects, particularly in conditions (i.e., 33 ms prime durations) where there was no evidence for phonological priming. The results constrain possible schemes for letter position coding. (PsycINFO Database Record (c) 2011 APA, all rights reserved)     

The location of a resistive shunt harmonic impedance along a distribution feeder and its influence on harmonic propagation

Although complete compensation is only possible using true active filters, resistive shunt harmonic impedances (SHI) have been shown to provide a considerable reduction of the harmonic propagation. In this paper, the harmonic mitigation potential of a resistive SHI is discussed concerning its influence on the voltage distortion profile along a typical distribution feeder, with the location of the SHI along the feeder as a parameter. Although the distortion values are dependent on the SHI location, it is shown that the end of the feeder is generally a good location to install the SHI, especially when the power system parameters can vary or are unknown. Calculations are performed on a typical radial distribution feeder. Both the power factor correction capacitors and the non-linear loads are concentrated in single nodes. The linear loads are disconnected to obtain the worst case for the voltage distortion. Also some measurements on a scale model of a typical distribution feeder are done and the experimental results confirm the results obtained from simulations.     

3D stereo interactive medical visualization

Our interactive, 3D stereo display helps guide clinicians during endovascular procedures, such as intraoperative needle insertion and stent placement relative to the target organs. We describe a new method of guiding endovascular procedures using interactive 3D stereo visualizations. We use as an example the transjugular intrahepatic portosystemic shunt (TIPS) procedure. Our goal is to increase the speed and safety of endovascular procedures by providing the interventionalist with 3D information as the operation proceeds. Our goal is to provide 3D image guidance of the TIPS procedure so that the interventionalist can readily adjust the needle position and trajectory to reach the target on the first pass. We propose a 3D stereo display of the interventionalist's needle and target vessels. We also add interactivity via head tracking so that the interventionalist gains a better 3D sense of the relationship between the target vessels and the needle during needle advancement.     

Multiround algorithms for scheduling divisible loads

Divisible load applications occur in many fields of science and engineering and can be easily parallelized in a master-worker fashion, but pose several scheduling challenges. While a number of approaches have been proposed that allocate load to workers in a single round, using multiple rounds improves overlap of computation with communication. Unfortunately, multiround algorithms are difficult to analyze and have thus received only limited attention. In this paper, we answer three open questions in the multiround divisible load scheduling area: 1) how to account for latencies, 2) how to account for heterogeneous platforms, and 3) how many rounds should be used. To answer 1), we derive the first closed-form optimal schedule for a homogeneous platform with both computation and communication latencies, for a given number of rounds. To answer 2) and 3), we present a novel algorithm, UMR. We evaluate UMR in a variety of realistic scenarios.     

Full‐color AMOLED with RGBW pixel pattern

Abstract— A full‐color AMOLED display with an RGBW color filter pattern has been fabricated. Displays with this format require about one‐half the power of analogous RGB displays. RGBW and RGB 2.16‐in.‐diagonal displays with average power consumptions of 180 and 340 mW, respectively, were characterized for a set of standard digital still camera images at a luminance of 100 cd/m². In both cases, a white‐emitting AMOLED was used as the light source, and standard LCD filters were used to provide the R, G, and B emission. The color gamuts of these displays were identical and the higher overall efficiency of the RGBW format results from two factors. First, a large fraction of a typical image is near neutral in color and can be reproduced using the white sub‐pixel. Second, the white sub‐pixel in an RGBW AMOLED display is highly efficient because of the absence of any color filter. The efficiency of these displays can be further enhanced by choosing a white emitter optimized to the target display white point (in this case D65). A two‐emission layer configuration based upon separate yellow and blue‐emitting regions is shown to be well suited for both the RGBW and RGB formats.     

Technologies towards patterned optical foils applied to transflective LCDs

Abstract— For better front‐of‐screen performance for transflective LCDs, a technology with extra free optimization parameters for the optical stack is needed. Thin wet coatable retarders which enable adjustment of the optical activity on the (sub)pixel level have been developed. Isotropic domains have been created in nematic retardation films by thermal patterning or photopatterning. Employing such a patterned retarder in a transflective LCD leads to an LCD that is lighter and thinner with good reflectivity, high transmission, and low chromaticity at all gray levels and wide viewing angles. The patterned thin‐film technology has been proven to be versatile and applicable in various LCD designs.