Calibration of the descent local search algorithm parameters using orthogonal arrays

Solving optimization problems using heuristic algorithms requires the selection of its parameters. Traditionally, these parameters are selected by a trial and error process that cannot guarantee the quality of the results obtained because not all the potential combinations of parameters are checked. To fill this gap, this paper proposes the application of Taguchi's orthogonal arrays to calibrate the parameters of a heuristic optimization algorithm (the descent local search algorithm). This process is based on the study of the combinations of discrete values of the heuristic tool parameters and it enables optimization of the heuristic tool performance with a reduced computational effort. To check its efficiency, this methodology is applied to a technical challenge never studied before: the optimization of the tensioning process of cable‐stayed bridges. The statistical improvement of the heuristic tool performance is studied by the optimization of the tensioning process of a real cable‐stayed bridge. Results show that the proposed calibration technique provided robust values of the objective function (with lower minimum and mean values, and lower standard deviation) with reduced computational cost.     

Presence of Cryptosporidium spp. and Giardia duodenalis through drinking water

To evaluate the presence of Cryptosporidium spp. and Giardia duodenalis in the influent and final effluent of sixteen drinking water treatment plants located in a hydrographic basin in Galicia (NW Spain) - in which the principal river is recognised as a Site of Community Importance (SCI) - estimate the efficiency of treatment plants in removing these protozoans and determine the species and genotypes of the parasites by means of a molecular assay. All plant samples of influent and final effluent (50-100 l) were examined in the spring, summer, autumn and winter of 2007. A total of 128 samples were analysed by method 1623, developed by US Environmental Protection Agency for isolation and detection of both parasites. To identify the genotypes present the following genes were amplified and sequenced: 18S SSU rRNA (Cryptosporidium spp.) and b-giardina (G. duodenalis). The mean concentrations of parasites in the influent were 0.0-10.5 Cryptosporidium spp. oocysts per litre and 1.0-12.8 of G. duodenalis cysts per litre. In the final treated effluent, the mean concentration of parasites ranged from 0.0-3.0 oocysts per litre and 0.5-4.0 cysts per litre. The distribution of results by season revealed that in all plants, the highest numbers of (oo)cysts were recorded in spring and summer. Cryptosporidium parvum, C. andersoni, C. hominis and assemblages A-I, A-II, E of G. duodenalis were detected. Cryptosporidium spp. and G. duodenalis were consistently found at high concentrations in drinking water destined for human and animal consumption in the hydrographic basin under study, in Galicia (NW Spain). It is important that drinking water treatment authorities rethink the relevance of contamination levels of both parasites in drinking water and develop adequate countermeasures.     

Effects of aging on neurons and glial cells from the superficial layers of the superior colliculus in rats

The aim of this study was to investigate the effect of aging on glial cells and neurons from the superficial layers of the superior colliculus in rats. We used stereological methods to estimate the volume of the superficial layers, neuron size, and the number of neurons and glial cells in Wistar male rats aged 3, 24, 26, and 28 months. A 32.6% volume increase was found in the stratum griseum superficiale between the ages of 3 and 26 months, while in the 28-month-old animals a 19% decrease was observed. The stratum opticum did not show any changes in volume with age. Also, our analysis revealed a process of somatic and nuclear atrophy in the neurons of the superficial layers in animals aged 26 and 28 months. On the other hand, no statistically significant differences were found in the numbers of neurons. The number of glial cells in the stratum griseum superficiale showed an increase between the 3rd and 26th month, while the stratum opticum suffered no change.     

Imposex and butyltin body burden in Nassarius nitidus (Jeffreys, 1867), in coastal waters within the Basque Country (northern Spain)

Levels of imposex (superimposition of male characters, upon females) and the presence of sterile females are assessed in the gastropod Nassarius nitidus (Jeffreys, 1867), at 22 locations in the Basque Country (northern Spain). At 18 of these localities, butyltin bioaccumulation (tributyltin (TBT); dibutyltin; monobutyltin) was analysed using isotope dilution and GC-ICP-MS. Higher imposex levels and TBT body burden were found in confined harbours, with a large vessel traffic or the presence of a fishing fleet or a shipyard. For the first time, four apparently sequential types of aborted capsules are described in this species. Another novelty is the interspecific comparison between imposex intensities in sympatrically living populations of N. nitidus and N. reticulatus. This showed that sensitivity to TBT pollution of both species is relatively similar (in terms of Relative Penis Length Index). Since N. nitidus has a restricted habitat distribution due to its low presence in wave-exposed habitats, its complementary use with other species is recommended for its use in TBT monitoring programmes.     

反思“制造”

随着现代主义运动由盛而衰,建筑学中源于手工艺及机器大工业的"建造"概念被重新审视,而逐渐被"制造"所取代,"制造"与"建造"相比,其含义更复杂、多元,即不仅指向物质现实的实体塑造,还包括了意识形态的概念策划、设计策略、文本阐述等等。在这一理论框架下简介鲁本·A·阿尔克莱、罗密·赫奇·马钱特、雨果·P·萨格雷多、罗德里戈·佩雷斯·德·阿尔塞几位学者与此观念相关的研究成果。《新建筑》杂志将其所撰写的研究论文辑录为本期专栏,以期引起读者关注,并进一步对当代建筑及建筑设计的本质与意义进行批判性思考。     

Claim management

Construction contracts are seldom ideal, and claims for time extensions or financial compensation often have to be made by one party on another. This paper is concerned with the typical causes of claims, how claims are analysed, and how they can be prevented. It also looks at the legal implications of CPM schedules, and at the importance of the efficient management of records.     

Photothermal,Structural, and Microstructural Characterization of SAE4320H Automotive Steel

SAE4320H steel was characterized by photothermal radiometry spectroscopy, scanning electron microscopy, x-ray diffraction, and Vickers microhardness, to study metallurgical property changes as a result of the annealing heat treatment. Photothermal radiometry (PTR) images of hot forged and annealed SAE4320H steel were obtained to study the thermal changes, as a consequence of metallurgical microstructure changes that were produced by the heat treatment conditions. X-ray diffraction showed that the annealing process improves the crystalline quality of the SAE4320H steel and releases of any thermal stress. Widmanstatten microstructure was identified as a typical structure after the forging process. The Widmanstatten is a metallographic microstructure transformation to ferrite and pearlite which affected SAE4320H steel hardness and thermal properties. Vickers test showed that the hardness decreases as a result of the annealing process. A positive correlation between Vickers microhardness and PTR amplitude images was found, indicating that the annealing process increases the PTR signal. This methodology allows the determination of the changes in the Vickers microhardness from a non-contact and remote method as in PTR.     

Crystal growth as an excitable medium

Crystal growth has been widely studied for many years, and, since the pioneering work of Burton, Cabrera and Frank, spirals and target patterns on the crystal surface have been understood as forms of tangential crystal growth mediated by defects and by two-dimensional nucleation. Similar spirals and target patterns are ubiquitous in physical systems describable as excitable media. Here, we demonstrate that this is not merely a superficial resemblance, that the physics of crystal growth can be set within the framework of an excitable medium, and that appreciating this correspondence may prove useful to both fields. Apart from solid crystals, we discuss how our model applies to the biomaterial nacre, formed by layer growth of a biological liquid crystal.     

Programmable birefringent lenses with a liquid-crystal display

We study the properties of a novel birefringent lens constructed by combination of a regular glass lens and a programmable diffractive lens addressed to a liquid-crystal display (LCD). The LCD affects only the vertical polarization state. Consequently the birefringent lens produces two images of an input object with different locations and magnifications for the two orthogonal polarization states. Using a properly oriented analyzer polarizer produces interference fringes. We then show how the imaging system acts as a common-path polarization interferometer for wave-front analysis of objects in the input plane. Finally, we subtract the two images to produce an edge-enhanced version of the input image. All these effects can be controlled because we can program lenses with different focal lengths onto the LCD.     

Cell design and multi-period machine loading in cellular reconfigurable manufacturing systems with alternative routing

This paper deals with the design and loading of Cellular Reconfigurable Manufacturing Systems in the presence of alternative routing and multiple time periods. These systems consist of multiple reconfigurable machining cells, each of which has Reconfigurable Machine Tools and Computer Numerical Control (CNC) machines. Each reconfigurable machine has a library of feasible auxiliary machine modules for achieving particular operational capabilities, while each CNC machine has an automatic tool changer and a tool magazine of a limited capacity. The proposed approach consists of two phases: the machine cell design phase which involves the grouping of machines into machine cells, and the cell loading phase that determines the routing mix and the tool and module allocation. In this paper, the cell design problem is modelled as an Integer Linear Programming formulation, considering the multiple process plans of each part type as if they were separate part types. Once the manufacturing cells are formed, a Mixed Integer Linear Programming model is developed for the cell loading problem, considering multi-period demands for the part types, and minimising transportation and holding costs while keeping the machine and cell utilisations in each period, and the system utilisation across periods, approximately balanced. An illustrative problem and experimental results are presented.