Design of thermophoretic probe for precise particle sampling

We proposed a design methodology for improved thermophoretic probes that can sample particles with high spatial resolution. A bending vibration analysis for the instantaneous motion of a probe has been done together with direct observation of the probe motion and flow disturbance for systematic study of the effect of different designs on particle sampling. Direct observation of the motion of thermophoretic sampling probes revealed that the probe with a low stiffness would result in inaccurate particle sampling. Based on these, the thermophoretic sampling probe was modified to minimize probe vibration and flow disturbance and this modified design was confirmed to sample particles with higher spatial resolution than the original one by examining transmission electron microscope (TEM) images of particles collected in a flame.     

Mesomorphism of Lanthanide(Ⅲ) 4-Hexyloxybenzoates

The 4-alkoxybenzoic acids are well-known liquid crystals showing several mesophases(nematic,smectic C phase or both)depending on the alkoxy chain length and whereby the rigid core of the mesogen is formed by intermolecular hydrogen bonds.In this paper it is shown that the thermal behaviour of lanthanide salts of 4-hexyloxybenzoic acids depends on the lanthanide ion(Ln=La,Pr,Nd,Sm,Eu).The lanthanum(Ⅲ)and praseodymium(Ⅲ)4-hexyloxybenzoates exhibit a smectic A mesophase.No mesophase is found for the corresponding compounds of heavier lanthanides.The thermal properties of the lanthanide(Ⅲ)4-hexyloxybenzoates were investigated by differential scanning calorimetry(DSC),polarising thermo-optical microscopy and synchrotron X-ray radiation.     

Plane Problem for Layered Composites with Periodic Array of Interfacial Cracks Under Compressive Static Loading

The current paper addresses the problem of 2-D modelling of the onset of failure process in a layered composite with periodic array of interfacial cracks under static compression along layers. The statement of the problem is based on the most accurate approach, the model of piecewise-homogenous medium. The condition of plane strain state is considered. The shear and the extensional buckling modes are examined. The laminae are modelled by transversally isotropic material (a matrix reinforced by continuous parallel fibres). The complex non-classical failure mechanics problem is solved utilizing finite element analysis. It is found that the 0°-plies volume fraction, the crack length and the mutual position of cracks influence the critical strain in the composite.     

Effect of Hydrogen Heat Treatment on the Chemical Composition of Aluminum Nitride Powder

The effect of hydrogen heat treatment on impurity contents in aluminum nitride powder of different fineness is studied. Thermodynamic calculations are provided pointing to the possibility of forming gaseous hydrogen compounds with impurity elements. It is established that as a result of treatment the contents of impurity elements, i.e. oxygen, carbon, sulfur, are reduced by a factor of 3-13. The optimum hydrogen heat treatment regime is determined: a temperature of 1323 K and an exposure time of 30 min.     

Response surface methodology applied for Orange II photocatalytic degradation in TiO2 aqueous suspensions

BACKGROUND: Heterogeneous photocatalysis is influenced by a number of parameters involving synergistic effects; hence, an experimental strategy design that considers interactions between the main variables is needed. The response surface methodology was applied for the investigation of photodegradation of 20 mg L^?1 Orange II in aqueous solutions and for optimization of color removal efficiency. Preliminary studies were performed to identify the parameters to be selected for optimization. RESULTS: The input variables considered for experimental design were: solution initial pH, oxidizing agent (H₂O₂) initial concentration and UV‐A irradiation time. The multivariate experimental design allowed the development of a quadratic response surface model to be used for the prediction of color removal efficiency over the full range of the experimental region. Under the optimum conditions established in the region of experimentation (pH = 6.9, [H₂O₂]₀ = 183 mg L^?1 and t = 32 min), a 100% color removal efficiency was obtained in experiments. CONCLUSIONS: It was found that the variables considered have important effects on color removal efficiency. The results demonstrate that the use of experimental design strategy is indispensable for successful investigation and adequate modeling of the process because the interdependence of the reaction parameters cannot be neglected. Copyright © 2008 Society of Chemical Industry     

FE3 EPR investigation of PLZT 1/65/35 and 8/65/35

X-band EPR spectra of PLZT 1/65/35 and PLZT 8/65/35 doped with 1% FE³⁺ were recorded at temperature range -175°C to 200°C. Three types of paramagnetic centers were found. Two of them are in strong axial and rhombic crystal field due to neighboring oxygen and lead vacancies. The other center has symmetry determined by polarization and oxygen octahedra tilt. EPR spectra of PLZT 8/65/35 are in agreement with its glassy behavior.     

Optimal control of nonlinear systems to given orbits

Using optimal control techniques we derive and demonstrate the use of an explicit single-step control method for directing a nonlinear system to a target orbit and keeping it there. We require that control values remain near the uncontrolled settings. The full nonlinearity of the problem in state space variables is retained. The “one-step” of the control is typically a composition of known or learned maps over (a) the time required to learn the state, (b) the time to compute the control and (c) the time to apply the control. No special targeting is required, yet the time to control is quite rapid. Working with the dynamics of a well-studied nonlinear electrical circuit, we show how this method works efficiently and accurately in two situations: when the known circuit equations are used, and when control is performed only on a Poincaré section of the reconstructed phase space. In each case, because the control rule is known analytically, the control strategy is computationally efficient while retaining high accuracy. The target locations on the selected target trajectory at each control stage are determined dynamically by the initial conditions and the system dynamics, and the target trajectory is an approximation to an unstable periodic orbit of the uncontrolled system. A linear stability analysis shows that dissipation in the dynamical system is essential for reaching a controllable state.     

A mixture theory for heat conduction in heterogeneous media

A mixture theory based on the ensemble-averaging technique is proposed for studying the thermal behaviour of heterogeneous media. Balance equations with partial heat fluxes and interaction terms are introduced for a two-component medium. Relations between these quantities and the ensemble-averaged (mean) temperatures of separate components are derived. The limits of application of widely used postulates of proportionality of the interaction term of difference in mean temperature of components is discussed. The effective conductivities of components in the mixture and the interaction coefficient are introduced and related to the so-called microstructure functions, which are functions of the microgeometry of the medium and the thermal properties of its components. Examples of the application of the theory to the calculation of the mean properties of a heterogeneous medium are presented.     

Word sense disambiguation for spam filtering

Spam has become a major issue in computer security because it is a channel for threats such as computer viruses, worms, and phishing. More than 86% of received e-mails are spam. Historical approaches to combating these messages, including simple techniques such as sender blacklisting or the use of e-mail signatures, are no longer completely reliable. Many current solutions feature machine-learning algorithms trained using statistical representations of the terms that most commonly appear in such e-mails. However, these methods are merely syntactic and are unable to account for the underlying semantics of terms within messages. In this paper, we explore the use of semantics in spam filtering by introducing a pre-processing step of Word Sense Disambiguation (WSD). Based upon this disambiguated representation, we apply several well-known machine-learning models and show that the proposed method can detect the internal semantics of spam messages.     

mRNA and miRNA Expression Analyses of the MYC/E2F/miR-17-92 Network in the Most Common Pediatric Brain Tumors

Numerous molecular factors disrupt the correctness of the cell cycle process leading to the development of cancer due to increased cell proliferation. Among known causative factors of such process is abnormal gene expression. Nowadays in the light of current knowledge such alterations are frequently considered in the context of mRNA–miRNA correlation. One of the molecular factors with potential value in tumorigenesis is the feedback loop between MYC and E2F genes in which miR-17-5p and miR-20a from the miR-17-92 cluster are involved. The current literature shows that overexpression of the members of the OncomiR-1 are involved in the development of many solid tumors. In the present work, we investigated the expression of components of the MYC/E2F/miR-17-92 network and their closely related elements including members of MYC and E2F families and miRNAs from two paralogs of miR-17-92: miR-106b-25 and miR-106a-363, in the most common brain tumors of childhood, pilocytic astrocytoma (PA), WHO grade 1; ependymoma (EP), WHO grade 2; and medulloblastoma (MB), WHO grade 4. We showed that the highest gene expression was observed in the MYC family for MYCN and in the E2F family for E2F2. Positive correlation was observed between the gene expression and tumor grade and type, with the highest expression being noted for medulloblastomas, followed by ependymomas, and the lowest for pilocytic astrocytomas. Most members of miR-17-92, miR-106a-363 and miR-106b-25 clusters were upregulated and the highest expression was noted for miR-18a and miR-18b. The rest of the miRNAs, including miR-19a, miR-92a, miR-106a, miR-93, or miR-25 also showed high values. miR-17-5p, miR-20a obtained a high level of expression in medulloblastomas and ependymomas, while close to the control in the pilocytic astrocytoma samples. miRNA expression also depended on tumor grade and histology.