A Colorimetric Hydrocarbon Sensor Employing a Swelling‐Induced Mechanochromic Polydiacetylene

Exceptional challenges have confronted the rational design of colorimetric sensors for saturated aliphatic hydrocarbons (SAHCs). The main reasons for this difficulty are the extremely nonpolar nature of these targets and their lack of functional groups that can interact with probes. By taking advantage of a mechanochromic conjugated polydiacetylene (PDA) and the hydrocarbon‐induced swelling properties of polydimethylsiloxane (PDMS), a sensor film that enables simple, colorimetric differentiation between a variety of C5 to C14 aliphatic hydrocarbons is fabricated. The unprecedented PDA–PDMS composite sensor undergoes a blue‐to‐red colorimetric transition on a timescale that is dependent on the chain length of the hydrocarbon target. In addition, the development of the red color is directly proportional to the swelling ratio of the film. This straightforward approach enables naked‐eye differentiation between n‐pentane and n‐heptane. The versatility of the sensor system is demonstrated by using it for the colorimetric determination of kerosene in adulterated diesel oil. Finally, the observation that a PDA microcrystal in the film undergoes significant expansion and tearing in concert with a blue‐to‐red colorimetric transition during the swelling process provides direct evidence for the mechanism for the mechanochromic behavior of the PDA.     

Fermentation of rice using amylolytic Bifidobacterium

Twenty-two amylolytic bifidobacteria grown in BHI-starch media were compared for the amylase activity of the intra- and extra-cellular enzymes. The activity of the cells grown in the liquid medium differed considerably. Among the strains tested B. adolescentis Int57 and B. adolescentis ZS8 exhibited higher activities than others. In rice medium containing 0.05% -cysteine·HCl and 0.2% yeast extract, the amylolytic Bifidobacterium strains grew considerably better than non-amylolytic Bifidobacterium strains. B. adolescentis Int57, which showed highest growth and amylase activity in the rice medium, was chosen and rice fermentation was investigated. The titratable acidity (TA) reached 2.43 and pH decreased to 4.4 after 24 h fermentation. The relative ratio of acetic acid to lactic acid gradually decreased during fermentation. The concentration of reducing sugar and amylase activity gradually increased and reached 14 mg maltose equivalent/ml and 35 mU/ml min, respectively, in 24 h. The accumulated reducing sugar was mostly maltotriose. The layer-separation of fermented product was stabilized by the addition of 1% gelatin. It was suggested that amylolytic bifidobacteria may be used for the production of fermented rice products.     

Thin-film encapsulation of top-emission organic light-emitting devices with polyurea/Al2O3 hybrid multi-layers

We developed a room-temperature encapsulation process based on multi-stack of ultra thin Al₂O₃ and polyurea layers for top-emission organic light-emitting devices (TEOLEDs). Device structure, including a capping layer for refractive-index matching and a thick polyurea buffer layer, was optimized to enhance light extraction without distorting electroluminescence spectrum. The efficiency of a TEOLED encapsulated with 5 pairs of Al₂O₃(50 nm)/polyurea(20 nm) layers was better than that of a glass-encapsulated TEOLED, whereas their color coordinates were almost identical. Moreover, the half-decay lifetime of a TEOLED encapsulated with 5 pairs of Al₂O₃/polyurea layers was 86% of that of a glass-encapsulated TEOLED. Water vapor transition rate of 5 pairs of Al₂O₃(50 nm)/polyurea(20 nm) layers on PET film was measured as low as 5 × 10⁻⁴ g/m² day.     

Efficient Generation of Scalable Transport Stream for High Quality Service in T‐DMB

We introduce an advanced terrestrial digital multimedia broadcasting (AT‐DMB) system that overcomes the limitation of data transmission rates of T‐DMB by doubling it with the same frequency bandwidth. In this letter, we propose an efficient algorithm which generates a scalable transport stream in AT‐DMB by multiplexing certain types of elementary streams encoded using scalable video coding and an MPEG‐surround audio coder for high‐quality multimedia services.     

Feature Detection and Simplification of 3D Face Data with Facial Expressions

We propose an efficient framework to realistically render 3D faces with a reduced set of points. First, a robust active appearance model is presented to detect facial features in the projected faces under different illumination conditions. Then, an adaptive simplification of 3D faces is proposed to reduce the number of points, yet preserve the detected facial features. Finally, the point model is rendered directly, without such additional processing as parameterization of skin texture. This fully automatic framework is very effective in rendering massive facial data on mobile devices.     

Organic Phenolic Configurationally Locked Polyene Single Crystals for Electro‐optic and Terahertz Wave Applications

We investigate a configurationally locked polyene (CLP) crystal 2‐(3‐(4‐hydroxystyryl)‐5,5‐dimethylcyclohex‐2‐enylidene)malononitrile (OH1) containing a phenolic electron donor, which also acts as a hydrogen bond donor. The OH1 crystals with orthorhombic space group Pna2₁ (point group mm2) exhibit large second‐order nonlinear optical figures of merit, high thermal stability and very favorable crystal growth characteristics. Higher solubility in methanol and a larger temperature difference between the melting temperature and the decomposition temperature of OH1 compared to analogous CLP crystals, are of advantage for solution and melt crystal growth, respectively. Acentric bulk OH1 crystals of large sizes with side lengths of up to 1 cm with excellent optical quality have been successfully grown from methanol solution. The microscopic and macroscopic nonlinearities of the OH1 crystals are investigated theoretically and experimentally. The OH1 crystals exhibit a large macroscopic nonlinearity with four times larger powder second harmonic generation efficiency than that of analogous CLP crystals containing dimethylamino electron donor. A very high potential of OH1 crystals for broadband THz wave emitters in the full frequency range of 0.1–3 THz by optical rectification of 160 fs pulses has been demonstrated.     

Highly Reliable Charge Trap-Type Organic Non-Volatile Memory Device Using Advanced Band-Engineered Organic-Inorganic Hybrid Dielectric Stacks

With the recent interest in data storage in flexible electronics, highly reliable charge trap-type organic-based non-volatile memory (CT-ONVM) has attracted much attention. CT-ONVM should have a wide memory window, good endurance, and long-term retention characteristics, as well as mechanical flexibility. This paper proposed CT-ONVM devices consisting of band-engineered organic–inorganic hybrid films synthesized via an initiated chemical vapor deposition process. The synthesized poly(1,3,5-trimethyl-1,3,5,-trivinyl cyclotrisiloxane) and Al hybrid films are used as a tunneling dielectric layer and a blocking dielectric layer, respectively. For the charge trapping layer, different Hf, Zr, and Ti hybrids are examined, and their memory performances are systematically compared. The best combination of hybrid dielectric stacks showed a wide memory window of 6.77 V, good endurance of up to 10⁴ cycles, and charge retention of up to 71% after 10⁸ s even under the 2% strained condition. The CT-ONVM device using the hybrid dielectric stacks outperforms other organic-based charge trap memory devices and is even comparable in performance to conventional inorganic-based poly-silicon/oxide/nitride/oxide/silicon structures devices. The CT-ONVM using hybrid dielectrics can overcome the inherent low reliability and process complexity limitations of organic electronics and expedite the realization of wearable organic electronics.     

Ag/Ni Metallization Bilayer: A Functional Layer for Highly Efficient Polycrystalline SnSe Thermoelectric Modules

The structural and electrical characteristics of Ag/Ni bilayer metallization on polycrystalline thermoelectric SnSe were investigated. Two difficulties with thermoelectric SnSe metallization were identified for Ag and Ni single layers: Sn diffusion into the Ag metallization layer and unexpected cracks in the Ni metallization layer. The proposed Ag/Ni bilayer was prepared by hot-pressing, demonstrating successful metallization on the SnSe surface without interfacial cracks or elemental penetration into the metallization layer. Structural analysis revealed that the Ni layer reacts with SnSe, forming several crystalline phases during metallization that are beneficial for reducing contact resistance. Detailed investigation of the Ni/SnSe interface layer confirms columnar Ni-Sn intermetallic phases [(Ni₃Sn and Ni₃Sn₂) and Ni_5.63SnSe₂] that suppress Sn diffusion into the Ag layer. Electrical specific-contact resistivity (5.32 × 10^?4 Ω cm²) of the Ag/Ni bilayer requires further modification for development of high-efficiency polycrystalline SnSe thermoelectric modules.     

Mobile Oriented Future Internet (MOFI):Architectural Design and Implementations

With the recent growth in smartphone services, the “mobile” environment has become a key factor to consider in the design of the future Internet. In this paper, we propose Mobile‐Oriented Future Internet (MOFI), which is a new architecture for the future Internet for mobile‐oriented environments. The MOFI architecture is designed with three functional features: global identifier and local locator in the identifier‐locator separation, query‐first data delivery for route optimization, and distributed control of identifier‐locator mapping. The proposed architecture and functional operations are implemented and tested using the Linux platform. From the experiment results, we see that the MOFI architecture performs better than the existing identifier‐locator separation schemes, such as Proxy Mobile IP and Host Identity Protocol, in terms of data throughout, mapping control overhead, and handover delay.     

Double S-Shaped Polarization – Voltage Curve and Negative Capacitance from Al2O3-Hf0.5Zr0.5O2-Al2O3 Triple-Layer Structure

The negative capacitance (NC) effect, recently discovered in a fluorite-based ferroelectric thin film, has attracted great attention as a rescue to overcome the scaling limitations of the conventional memory and logic devices of highly integrated circuits. The NC effect manifesting an S-shaped polarization–voltage (P–V) curve is initially interpreted by a 1-dimensional Landau Ginzburg Devonshire (LGD) model. However, a series of recent studies have found that this effect can also be explained by the inhomogeneous stray field energy (ISE) model. In this study, by extending the ISE model in the ferroelectric (FE)-dielectric (DE) layered structure, an analytical model that considers the influence of the interfacial screening charge distribution is presented. This model showed that the NC effect in the FE-DE heterostructure can be manifested in various forms other than a single S-shaped P–V curve. In particular, a double S-shaped P–V curve is expected from the fully compensated anti-parallel domain structure, confirmed experimentally in the actual Al₂O₃/(Hf_0.5Zr_0.5)O₂/Al₂O₃ triple-layer structure. Furthermore, to reveal the origin of the double S-shaped P–V curve, a multidomain LGD model is presented. It is confirmed that this phenomenon is attributed to the evolution of inhomogeneous stray field energy.