Fundamental Limits of Organic Packages and Boards and the Need for Novel Ceramic Boards for Next Generation Electronic Packaging

The system-on-a-package (SOP) paradigm proposes a package level integration of digital, RF/analog and opto-electronic functions to address future convergent microsystems. Two major components of SOP fabrication are sequential build-up of multiple layers (4–8) of conducting copper patterns with interlayer dielectrics on a board and multiple ICs flip-chip bonded on the top layer. A wide range of passives, wave-guides and other RF and opto-electronic components buried within the dielectric layers provide the multiple functions on a single microminiaturized platform.The routing of future nanoscale ICs with 10,000+ I/Os require multiple build-up layers of ultra fine board feature sizes of 10 m lines/space widths and 40 m pad diameters. Current FR4 boards cannot achieve this build-up technology because of dimensional instability during processing. These boards also undergo high warpage during the sequential build-up process which limits the fine-line lithography and also causes misalignment between the vias and their corresponding landing pads. In addition, the CTE mismatch between the silicon die and the board leads to IC-package interconnect reliability concerns, particularly in future fine-pitch assemblies where underfilling becomes complicated and expensive.This work reports experimental and analytical work comparing the performance of organic and novel ceramic boards for SOP requirements. The property requirements as deduced from these results indicate that a high stiffness and tailorable CTE from 2–4 ppm/C is required to enable SOP microminiaturized board fabrication and assembly without underfill. A novel ceramic board technology is proposed to address these requirements.     

Investigation of twin-wall structure at the nanometre scale using atomic force microscopy

The structure of twin walls and their interaction with defects has important implications for the behaviour of a variety of materials including ferroelectric, ferroelastic, co-elastic and superconducting crystals. Here, we present a method for investigating the structure of twin walls with nanometre-scale resolution. In this method, the surface topography measured using atomic force microscopy is compared with candidate displacement fields, and this allows for the determination of the twin-wall thickness and other structural features. Moreover, analysis of both complete area images and individual line-scan profiles provides essential information about local mechanisms of twin-wall broadening, which cannot be obtained by existing experimental methods. The method is demonstrated in the ferroelectric material PbTiO(3), and it is shown that the accumulation of point defects is responsible for significant broadening of the twin walls. Such defects are of interest because they contribute to the twin-wall kinetics and hysteresis.     

Polarization-based compensation of astigmatism

One approach to aberration compensation of an imaging system is to introduce a suitable phase mask at the aperture plane of an imaging system. We utilize this principle for the compensation of astigmatism. A suitable polarization mask used on the aperture plane together with a polarizer-retarder combination at the input of the imaging system provides the compensating polarization-induced phase steps at different quadrants of the apertures masked by different polarizers. The aberrant phase can be considerably compensated by the proper choice of a polarization mask and suitable selection of the polarization parameters involved. The results presented here bear out our theoretical expectation.     

Chemical,rheological and parotta making characteristics of flourmill streams

Chemical, rheological and parotta-making characteristics of wheat-milling flour streams were studied with the main aim of developing a speciality flour for parotta. Important quality characteristics such as ash, flour colour, dry gluten content, sedimentation value, free and bound lipid content, farinograph and alveograph characteristics of the mill streams were determined. The studies showed an increase in ash, gluten content and sedimentation value with increasing numbers of breaks in the flour streams. An increase in percentage whiteness and bound lipids was observed in the first five reduction passages (C1 to C5). The alveograph characteristics indicated that the average abscissa at rupture (L) length of the curve increased with increasing reduction streams from C1 to C5, and also that the curves were better balanced when compared to 1 BK to 5 BK. The parottas made from the first five break passages had a decreased spread ratio, dull brown colour, and fused layers and lower overall quality score (43–79). The initial reduction streams (C1 to C5) produced good quality parottas in terms of appearance, spread, layers and texture. The shear force values indicating the texture of the product ranged from 1,120 to 1,250 g. The speciality flour made by combining C1 to C5 streams had 0.45% ash, 9.63% dry gluten, 45 ml sodium dodecyl sulphate sedimentation value, 0.7% free lipid and 1.8% bound lipid and produced parottas having creamish white colour, excellent pliability, thin, transparent and distinct layers, soft texture and moderate chewiness. In the mouth the parottas broke down easily, without leaving any residue. The overall quality score of parotta was highest (93.5) for the speciality flour when compared to break and reduction streams (43–77 and 56–92 respectively).     

Sixth International Conference ACID ROCK DRAINAGE 2003

CONFERENCE

Sixth International Conference ACID ROCK DRAINAGE 2003     

The distribution of osteocalcin, degree of mineralization, and mechanical properties along the length of Cyprinus carpio rib bone

This study examined the spatial distribution of selected biochemical and mechanical properties along the length of carp rib bone. Carp rib bone was chosen because of its unusually high osteocalcin content relative to other extractable proteins. The amount of osteocalcin was significantly lower (p<0.01) at the most distal section, relative to all other sections. The amount of phosphate (p<0.05) and the elastic modulus in the longitudinal plane (p<0.0001) were found to be significantly higher in the most distal section, relative to the most proximal section. There was no significant difference in the calcium distribution, molar Ca/P ratio, or elastic modulus in the transverse plane. It was speculated that the distal section contains less mature bone. The methods illustrate the potential usefulness of nanoindentation to characterize the mechanical properties of bone, relative to its biochemical composition. © 2001 Kluwer Academic Publishers     

Analysis and characterization of photo-plethysmographic signal

Qualitative assessment of the overall clinical status of the subject and characterization of complex cardiovascular dynamics from digital blood volume pulsations measured noninvasively using a photo-plethysmographic device is addressed. A novel concept is employed to detect the dominant nonsinusoidal periodicity embedded in the data series and to extract the associated periodic component. The detection and the extraction of periodic component is performed with moving window to accommodate the variations of the physiological oscillations. The covariance matrix formed by the gradually varying pattern is used as a simple measure of qualitative assessment. Further, the characterization of the underlying system in the light of nonlinear dynamical analysis is also presented. The stable subjects are shown to behave as a low-dimensional system whereas the diseased subjects exhibit comparatively high dimensional activity.     

Groove-Coupled InGaAs/GaAs Quantum Dot Laser/Waveguide on Silicon

We demonstrate a monolithically integrated laser-waveguide device implemented with InGaAs/GaAs quantum dot heterostructures grown on silicon by molecular beam epitaxy. Focused-ion-beam (FIB) etching is utilized to form high-quality laser mirrors for feedback and grooves for coupling and electrical isolation. Based on a transmission matrix and a generalized beam propagation approach in terms of intensity moments and Gouy phase shifts, a self-consistent model is developed to estimate the reflectivity and coupling coefficient at etched grooves and optimize these parameters for real devices. High-quality FIB-etched facets with a reflectivity of R~0.28 and efficient coupling with coupling coefficients of up to 30% for well-defined grooves have been achieved.     

A Novel Electroless Process for Embedding a Thin Film Resistor on the Benzocyclobutene Dielectric

To realize embedded resistors on multilayer benzocyclobutene (BCB) either on-chip or on-board, a low-cost large format electroless process for deposition of NiP and NiWP thin-film resistors using both low-temperature (25°C) and high-temperature (90°C) baths has been developed. The electroless process exhibits uniform resistor thickness in the submicron range and offers low profile and excellent adhesion to the BCB dielectric layer. The resistor films also act as a seed layer for direct electroplating of copper traces. The NiP alloys can also be tailored to a variable temperature coefficient of resistance (TCR) with different alloy compositions. The electroless process can be adopted in the PCB manufacturing industries with no additional investment. This article is the first report on electroless plated thin film resistors on low loss BCB dielectric.