Density-Dependence of Surface Transport in Tellurium-Enriched Nanograined Bulk Bi2Te3

Three-dimensional topological insulators (3D TI) exhibit conventional parabolic bulk bands and protected Dirac surface states. A thorough investigation of the different transport channels provided by the bulk and surface carriers using macroscopic samples may provide a path toward accessing superior surface transport properties. Bi₂Te₃ materials make promising 3D TI models; however, due to their complicated defect chemistry, these materials have a high number of charge carriers in the bulk that dominate the transport, even as nanograined structures. To partially control the bulk charge carrier density, herein the synthesis of Te-enriched Bi₂Te₃ nanoparticles is reported. The resulting nanoparticles are compacted into nanograined pellets of varying porosity to tailor the surface-to-volume ratio, thereby emphasizing the surface transport channels. The nanograined pellets are characterized by a combination of resistivity, Hall- and magneto-conductance measurements together with (THz) time-domain reflectivity measurements. Using the Hikami-Larkin-Nagaoka (HLN) model, a characteristic coherence length of ≈200 nm is reported that is considerably larger than the diameter of the nanograins. The different contributions from the bulk and surface carriers are disentangled by THz spectroscopy, thus emphasizing the dominant role of the surface carriers. The results strongly suggest that the surface transport carriers have overcome the hindrance imposed by nanoparticle boundaries.     

Optimisation of X-ray examinations in Lithuania: start of implementation in mammography

Optimisation of medical X-ray examinations is very important for the enhancement of the reliability of the examination and for the reduction of the radiation dose to patients. Results of investigations of doses to patients during mammography using thermoluminescence dosemeters at different hospitals are presented together with a brief overview of the situation for mammography in Lithuania. It is shown that the entrance surface air kerma varies in a broad range and differed from hospital to hospital. Nevertheless the calculated values of average glandular dose (AGD) for a 'standard' breast being relatively high were comparable with those (3.2 mGy per exposure at net optical density 1.4) currently accepted by international authorities. Differences in AGD values evaluated at different hospitals demonstrate the existing potential for optimisation of the mammography screening procedures. The results of this investigation will be included in a database for patient doses in Lithuania and used for establishing a national reference dose level for mammography. Currently, reference levels recommended by international authorities are used in Lithuania.     

Using Raman spectroscopic imaging for non‐destructive analysis of filler distribution in chalk filled polypropylene

A feasibility study on using Raman spectral imaging for visualization and analysis of filler distribution in chalk filled polypropylene samples has been carried out. The spectral images were acquired using a Raman spectrometer with 785 nm light source. Eight injection‐molded samples with concentration of chalk 25% and 50% were used in the experiment. Two methods for spectral unmixing were applied to the images and both revealed almost identical distribution maps over the samples’ surface. The maps also correlated with the ones obtained for several separated peaks, typical for the chalk and the polypropylene. The revealed distribution patterns show the same trend for each concentration level and agree with theoretical explanation of plastic flow into an injection molding tool. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43016.     

An analysis of the numerical model influence on the ground temperature profile determination

The estimation of the ground temperature profile with respect to the depth and time is the key issue in many engineering applications which use the ground as a source of thermal energy. In the present work, the influence of the model components on the calculated ground temperature distribution has been analysed in order to develop an accurate and robust model for the prediction of the ground temperature profile. The presented mathematical model takes into account all the key phenomena occurring in the soil and on its top surface. The impact of individual model elements on the temperature of the soil has been analysed. It has been found that the simplest models and the most complex model result in a similar temperature variation over the simulation period, but only at a low depth. A detailed analysis shows that a larger depth requires more complex models and the calculation with the use of simple models results in an incorrect temperature and a theoretical COP estimation.     

Promoting occupational health in secondary schools through virtual patients

Adolescents with asthma or allergies do not consider their disease when making their career choice. Therefore the aim of this project was to sensitize secondary school students for occupational diseases before they start working.     

Bulk tank raw milk microbiota differs within and between farms: A moving goalpost challenging quality control

Microbial contamination of bovine raw milk often occurs at the farm. To acquire a deeper knowledge of the microbiota of farm tank milk, we studied milk from 45 farms situated in 2 geographical areas in Norway. Each farm was visited on 3 different occasions, with at least 2 wk between visits. We combined both bacterial cell counts and a sequence variant inference method of amplicon-based high-throughput sequencing to achieve a high-resolution overview of the microbiota in each sample. Compositional variation of the farm milk microbiota was shown in relation to the 2 areas, between the farms and between the sampling times. Despite the near constant level of bacteria enumerated in milk from each individual farm, the dominant microbiota differed significantly between the samplings. The predominant microbiota was dominated by spoilage genera, such as Pseudomonas and Bacillus, as well as the dairy fermentation genus Lactococcus and mastitis-causing organisms (Streptococcus). Analysis of the identified sequence variants within these genera showed that the populations of Pseudomonas and Lactococcus in milk had similar composition between the farms, but that Bacillus and, in particular, Streptococcus populations changed between collection days from the same farm and between farms and geographical areas. Furthermore, the levels and composition of Bacillus and Paenibacillus were different between the 2 geographical areas. The results presented here provide new insight into the farm milk microbiota and show that this microbiota is a dynamic community highly subject to variation.     

Organically grown tomato (Lycopersicon esculentum Mill.): bioactive compounds in the fruit and infection with Phytophthora infestans

BACKGROUND: Tomato fruits are characterized by a good nutritional profile, including different bioactive compounds such as carotenoids, phenolic compounds and ascorbic acid. The objective of this study was to analyze the content of bioactive compounds in the fruit and the infection by Phytophthora infestans of 28 tomato genotypes from organic outdoor production. The relationship between bioactive compounds in the fruit and infection with P. infestans was estimated. Field experiments were carried out in 2004 and 2005 at two locations in central Germany. RESULTS: Significant variation among genotypes, locations and years was observed for the content of lycopene, ascorbic acid, total phenolic compounds, antioxidant capacity and the infection level of P. infestans. Antioxidant capacity seemed to be influenced mainly by the phenolics and was highest in small fruits, which were less infected with P. infestans. CONCLUSION: The large genetic variation among tomato genotypes for the content of bioactive compounds in their fruit allows for selection gains. None of the investigated bioactive compounds can be recommended for the indirect selection for increased field resistance against P. infestans. Copyright © 2011 Society of Chemical Industry     

Simultaneous SAXS/WAXS experiments on shear induced iPP crystallization near nominal melting temperature

Simultaneous small- and wide-angle synchrotron radiation X-ray scattering was performed to monitor the evolution of crystalline structure within the iPP melt during and after applying pulse shear. The iPP melt was subjected to a strong pulse shear of 240 s^?1 for 6 s at temperatures between 150 and 170 °C below and above the nominal melting temperature T_m. It was found that the imposed shear affected the melt only at lowest temperature. Structures generated during flow above 150 °C were too dilute to be detected. To extract the hidden structure, the melt was cooled to crystallization temperature of 150 °C either immediately after shearing or after annealing at shear temperature for up to 30 min. This treatment manifested with an anisotropic structure in a few minutes after quenching, undetectable when both shear and annealing temperatures presented the same value. The data obtained revealed also close correlations between annealing time, shear temperature and incubation time.     

Modifying the electronic properties of single-walled carbon nanotubes using designed surfactant peptides

The electronic properties of carbon nanotubes can be altered significantly by modifying the nanotube surface. In this study, single-walled carbon nanotubes (SWCNTs) were functionalized noncovalently using designed surfactant peptides, and the resultant SWCNT electronic properties were investigated. These peptides have a common amino acid sequence of X(Valine)(5)(Lysine)(2), where X indicates an aromatic amino acid containing either an electron-donating or electron-withdrawing functional group (i.e. p-amino-phenylalanine or p-cyano-phenylalanine). Circular dichroism spectra showed that the surfactant peptides primarily have random coil structures in an aqueous medium, both alone and in the presence of SWCNTs, simplifying analysis of the peptide/SWCNT interaction. The ability of the surfactant peptides to disperse individual SWCNTs in solution was verified using atomic force microscopy and ultraviolet-visible-near-infrared spectroscopy. The electronic properties of the surfactant peptide/SWCNT composites were examined using the observed nanotube Raman tangential band shifts and the observed additional features near the Fermi level in the scanning tunneling spectroscopy dI/dV spectra. The results revealed that SWCNTs functionalized with surfactant peptides containing electron-donor or electron-acceptor functional groups showed n-doped or p-doped altered electronic properties, respectively. This work unveils a facile and versatile approach to modify the intrinsic electronic properties of SWCNTs using a simple peptide structure, which is easily adaptable to obtain peptide/SWCNT composites for the design of tunable nanoscale electronic devices.