Mixing of solids in different mixing devices

Mixing of powders is a common operation in any industry. Most powders are known to be cohesive, many agglomerate spontaneously when exposed to humid atmosphere or elevated storage temperature. Agitation of the powder (especially powders with different bulk densities) may result in migration of smaller particles downwards and of larger ones upwards. Another problem is segregation whose main cause is the difference in particle size, density shape and resilience. There are standard mixing devices, such as drum tumblers or Turbula mixers. Alternate device type used is the static mixer of Kenics type. Static mixers save energy, disable segregation and effect particle migration. In this paper, static mixers, as devices for powder mixing, are tested as well as Turbula and V-shaped drum mixer, since those devices are commonly used for powder blending in industry. Mixtures that were blended by means of those three devices were made out of the model material, quartz sand, in different component ratios (20:80 and 30:70). The results were statistically calculated and graphically presented. Cohesion indexes were measured with Powder Flow Analyser to see the effect of material flow on the mixture quality. The results obtained by those three devices, the particle size effect and cohesion indexes, bring us to the conclusion that static mixers could be used for mixing of powders, but their shape, number of mixing elements and the mixer length should be adapted for each mixture separately, experimentally and mathematically, through modelling of the system.     

Diagnosing Czech Patients with Inherited Platelet Disorders

A single-center study was conducted on 120 patients with inherited disorders of primary hemostasis followed at our hematological center. These patients presented a variety of bleeding symptoms; however, they had no definitive diagnosis. Establishing a diagnosis has consequences for the investigation of probands in families and for treatment management; therefore, we aimed to improve the diagnosis rate in these patients by implementing advanced diagnostic methods. According to the accepted international guidelines at the time of study, we investigated platelet morphology, platelet function assay, light-transmission aggregometry, and flow cytometry. Using only these methods, we were unable to make a definitive diagnosis for most of our patients. However, next-generation sequencing (NGS), which was applied in 31 patients, allowed us to establish definitive diagnoses in six cases (variants in ANKRD26, ITGA2B, and F8) and helped us to identify suspected variants (NBEAL2, F2, BLOC1S6, AP3D1, GP1BB, ANO6, CD36, and ITGB3) and new suspected variants (GFI1B, FGA, GP1BA, and ITGA2B) in 11 patients. The role of NGS in patients with suspicious bleeding symptoms is growing and it changes the diagnostic algorithm. The greatest disadvantage of NGS, aside from the cost, is the occurrence of gene variants of uncertain significance.     

A Novel Mechanism of Embrittlement Affecting the Impact Reliability of Tin-Based Lead-Free Solder Joints

This work addresses a new mode of brittle failure that occurs in the bulk of tin-based lead-free solder joints, unlike the typical brittle failures that occur in the interfacial intermetallics. Brittle failures in the joint bulk result from the low-temperature ductile-to-brittle transition in the fracture behavior of β-tin. The bulk embrittlement of these joints is discussed by referring to the results of impact tests performed on both solder joints and bulk solder specimens. The mechanism of bulk embrittlement is largely explained based on the results of a fractography study performed on the bulk joint failures using scanning electron microscopy.     

Are theoretical consultants needed?

Comments on the article by B. D. Slife and R. N. Williams (see record 84-17550) concerning theoretical psychology as a subdiscipline of psychology. The authors agree that important philosophical and metatheoretical issues confront psychology and that greater training in these areas is needed at the doctoral level; however, they do not agree with the negative assessment of positivism nor with the recommendation that specially trained theoreticians should serve as consultants in psychology departments. It is believed that the content of the proposal was vague and the use of the term theory is confusing. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Changes in viscosity and pectolytic enzymes of tomato and strawberry juices processed by high-intensity pulsed electric fields

The effects pulse frequency (50–250 Hz), pulse width (1.0–7.0 μs) and polarity (monopolar or bipolar) of high-intensity pulsed electric field treatments (35 kV cm⁻¹ and 1000 μs) on viscosity and the pectin methylesterase (PME) and polygalacturonase (PG) activities were evaluated using a response surface methodology. Second-order expressions were accurate enough to fit experimental results. Tomato juice apparent viscosity increased within the range of the assayed conditions, achieving the highest values at 250 Hz and 7.0 μs in bipolar mode. At the same conditions the lowest residual PME (RA_PME = 10%) and PG (RA_PG = 45%) activities were observed in the juice. Apparent viscosity of strawberry juices slightly rose when frequencies higher than 100 Hz and 1-μs monopolar pulses were applied to the juice. Treatments causing the greatest increase in strawberry juice apparent viscosity also led to the lowest RA_PME (10%) and RA_PG (75%) values. In contrast, viscosity loss was promoted under the rest of assayed HIPEF conditions despite the low RA_PME values (<20%) achieved. Moreover, RA_PG did not decrease below 75% throughout the range of studied conditions.