Applicability of NIR spectroscopy to determine oil and other physicochemical parameters in Rosa mosqueta and Chilean hazelnut

Due to the increasing interest in certain components, specially the oil, from non-conventional seeds as Rosa mosqueta (Rosa rubiginosa) and Chilean hazelnut (Gevuina avellana), quick determinations of oil and other parameters were carried out by using near-infrared (NIR) spectroscopy. Moisture, oil, fiber (as acid detergent fiber) and protein from solid samples of the seeds as mentioned, along with those of soybean (Glycine max), already analyzed by NIR and for serving as control for the variability of the method, were studied. Sample interactions to NIR radiations were processed using the multivariate regression algorithm Partial Least Squared (PLS) to build a calibration model. Standard error of cross-validation (SECV) was used to estimate the prediction error. Moisture of Rosa mosqueta, Chilean hazelnut presscake and soybean meal (in the ranges 10–15, 10–15, 8–10%, respectively), acid detergent fiber (60–68, 12–16, 10–15%, respectively), oil (1–4, 14–20, 5–13%, respectively) and protein (1–5, 8–15, 27–45%, respectively) were previously determined by wet analysis using standard methods, so creating a library. The possibility to analyze parameters from very different oilseeds with an acceptable uncertainty was also established. Standard errors of cross-validation were between 1.25 and 2.99%, being the oil content the best predicted parameter.     

ELNES at magic angle conditions

If one needs to cancel the effects of the anisotropy of the sample in a EELS experiment in the TEM, a particular couple of values for the collection and convergence angle must be used, called magic angle conditions (MAC). Recent developments in the theory have shown that a full relativistic treatment is mandatory to correctly describe this effect and that the MAC are strongly dependent on the acceleration voltage. We show how the analytical formula can be derived and give the exact analytical solution for the MAC which can then be easily applied to every practical case. We show the consequences of the energy dependence of the magic angle and that the parallelity of the beam will be the limiting factor for high acceleration voltages while for low acceleration voltages the contribution coming from Bragg spots may make it impossible to reach MAC.     

聚氨酯胶粘剂水解问题的有效解决途径

聚合物有几种主要的降解机理:热降解、化学物降解、氧化降解、微生物降解以及水解降解。其中,水解是缩聚反应生成的聚合物最致命的弱点,聚氨酯粘合剂也不例外。水解使聚合物的力学性能在一段时间后丧失殆尽,严重影响了其使用性能和应用范围。碳化二亚胺(Stabaxol~(?))是为解决酯类聚合物水解问题而研制的高效抗水解剂。文章描述了碳化二亚胺抗水解剂在聚酯型聚氨酯粘合剂中的水解保护机理及效果。     

Chitosan biobased and intelligent films: Monitoring pH variations

Many factors can influence the shelf-life product, such as pH, water activity, nutrient levels available oxygen, etc. Variations in food pH could occur due to microorganism growth and chemical reactions that may impact flavour, consistency and shelf-life. The objective of this paper was to obtain and characterize the fast pH-colourimetric indicator device, applying a simple manufacturing technique, using food grade and biodegradable materials. The intelligent film was based on natural compounds as chitosan and anthocyanin (pH-colourimetric indicator). Chitosan intelligent films (C-ATH, 2.0 g/100 g) were obtained incorporating anthocyanin (1.0 g/100 g) in matrix films. Initially, a dark violet colour was observed in chitosan films dried. When immersed in different pH buffers, the colour range of the films varied from pink (in acid pH) to bluish-green (in neutral pH) and to violet (in basic pH). The water solubility and water vapour transmission rate of C-ATH were decreased to 60% and 48%, respectively, as compared to control film (CF, without indicator). The mechanical properties such as tensile strength and rigidity were maintained, and the elongation at break was reduced to 47% compared to CF. The advantages of this system were the simple manufacturing process, biodegradability and usage of natural and safe compounds.     

Detection of verocytotoxin-producing Escherichia coli serogroups 0157 and 026 in the cecal content and lymphatic tissue of cattle at slaughter in Italy

Verocytotoxin-producing Escherichia coli (VTEC) has emerged as a foodborne pathogen that can cause severe and potentially fatal illnesses, such as hemorrhagic colitis or the hemolytic uremic syndrome. In this study, 182 cattle at slaughter (119 dairy cows and 63 feedlot cattle) were randomly selected and tested for the presence of VTEC serogroups O26, O103, O111, O145, and O157 in their cecal content and lymphatic tissue (tonsils or mesenteric lymph nodes). A total of 364 samples were evaluated with an immunomagnetic separation technique followed by slide agglutination. Presumptive VTEC 026, O103, O111, O145, and O157 isolates were tested by Vero cell assay for verocytotoxin production and by multiplex PCR assay for the detection of vtxl, vtx2, eae, and E-hlyA genes. VTEC O157 was detected in 6 (3.3%) of 182 animals, and VTEC 026 was detected in 1 (0.5%) of 182 animals. No VTEC O103, VTEC O111, or VTEC O145 isolates were found in cattle feces, but one VTEC O91:H- vtx2+, eae-, E-hlyA+ strain nonspecifically cross-reacted with the VTEC O103 type. The prevalence of VTEC O157 in the lymphatic tissue of cattle was 1.1% in both tonsils (1 of 93 samples) and mesenteric lymph nodes (1 of 89 samples). Lymphatic tissue contamination was observed only in VTEC O157 intestinal carriers; two (33.3%) of six fecal carriers were simultaneously VTEC O157 lymphatic carriers. This finding suggests that VTEC O157 contamination of meat does not necessarily come from feces or the environment. No other VTEC serogroups were detected in the lymphatic tissue of slaughtered cattle.     

Application of bacteriocinogenic Enterococcus mundtii CRL35 and Enterococcus faecium ST88Ch in the control of Listeria monocytogenes in fresh Minas cheese

Several strains of Enterococcus spp. are capable of producing bacteriocins with antimicrobial activity against important bacterial pathogens in dairy products. In this study, the bacteriocins produced by two Enterococcus strains (Enterococcus mundtii CRL35 and Enterococcus faecium ST88Ch), isolated from cheeses, were characterized and tested for their capability to control growth of Listeria monocytogenes 426 in experimentally contaminated fresh Minas cheese during refrigerated storage. Both strains were active against a variety of pathogenic and non-pathogenic microorganisms and bacteriocin absorption to various L. monocytogenes, Enterococcus faecalis ATCC 19443 and Lactobacillus sakei ATCC 15521 varied according to the strain and the testing conditions (pH, temperature, presence of salts and surfactants). Growth of L. monocytogenes 426 was inhibited in cheeses containing E. mundtii CRL35 up to 12 days at 8 °C, evidencing a bacteriostatic effect. E. faecium ST88Ch was less effective, as the bacteriostatic affect occurred only after 6 days at 8 °C. In cheeses containing nisin (12.5 mg/kg), less than one log reduction was observed. This research underlines the potential application of E. mundtii CRL35 in the control of L. monocytogenes in Minas cheese.     

Effects of calf diet, antioxidants, packaging type and storage time on beef steak storage

The effect of basal dietary supplemented with vegetable oils plus vitamin E (sunflower, soybean, linseed and a basal diet control), type of packaging (MAP or vacuum), addition of natural antioxidant (grape seed, rosemary) and storage time (0, 7, 14 and 21 days) on lipid oxidation, color stability, vitamin E content, and total aerobic bacterial counts in steaks of Longissimus thoracis was studied. The triple interaction diet × time × packaging affected oxidative stability, redness and yellowness of the meat. TBARS values did not increase with time in vacuum-packaged samples for all dietary treatments. However, samples from MAP and control showed the highest TBARS values after 21 days of storage (0.72 mg MDA/kg of meat, P < 0.05). Both exogenous antioxidant extracts and MAP maintained low total aerobic counts in steaks until the 21st day. Calves should be fed a diet supplemented with L-VE, stored in MAP and treated with grape seed extract to extend the shelf life of their meat.     

Effect of finishing and ageing time on quality attributes of loin from the meat of Holstein–Fresian cull cows

The effects of finishing time, (T0 = 0, T1 = 30 and T2 = 60 days), on Holstein–Friesian cull cows (n = 18) and post-mortem ageing, (1, 7, 14, 21, 35 and 42 days), under vacuum conditions of Longissimus thoracis (LT) muscles were investigated. The objective of this research was to study how finishing feeding (based on a commercial concentrate and corn silage), following a pasture period of 90 days, affected carcass and meat quality. Ageing time effect was also evaluated on the main quality attribute of added value pieces, such as “striploin of ox” from cull cows. Finishing treatment affected intramuscular fat content (IMF), moisture percentage, water-holding capacity (WHC), colour parameters and shear force of meat at 24 h post-mortem, whereas ageing time enhanced meat tenderness, when this was measured by two textural tests, Warner–Braztler (WB) and textural profile analysis (TPA). A minimum shear force was achieved at 7 and 14 days of ageing for T1 and T2, respectively. No differences (P > 0.05) could be found in colour parameters from 7 to 42 days. The results show that a finishing time of two months is very beneficial, due to the increase in meat fatness, improved overall carcass quality and luminosity (L*). Furthermore, 14 ageing days were sufficient to improved tenderness. Ageing time did not have an effect on lipid oxidation (P > 0.05) and this leads us to conclude that meat shelf life exceeded 42 days under vacuum conditions’.     

Light induced electropolymerization of poly(3,4-ethylenedioxythiophene) on niobium oxide

The photoelectrochemical polymerization of poly(3,4-ethylenedioxythiophene), PEDOT, was successfully realized on anodic film grown to 50 V on magnetron sputtered niobium. Photocurrent Spectroscopy was employed to study the optical properties of Nb/Nb₂O₅/PEDOT/electrolyte interface in a large range of potential, and to get an estimate of the band gap and flat band potential of both the oxide and the polymer. Scanning Electron Microscopy was used to study the morphology of PEDOT. Both the optical and morphological features of the photoelectrochemically grown polymer were compared with those showed by PEDOT electropolymerized on gold conducting substrate.