Towards an integrated neonatal brain and cardiac examination capability at 7 T: electromagnetic field simulations and early phantom experiments using an 8-channel dipole array

Objective

Neonatal brain and cardiac imaging would benefit from the increased signal-to-noise ratio levels at 7 T compared to lower field. Optimal performance might be achieved using purpose designed RF coil arrays. In this study, we introduce an 8-channel dipole array and investigate, using simulations, its RF performances for neonatal applications at 7 T.

Methods

The 8-channel dipole array was designed and evaluated for neonatal brain/cardiac configurations in terms of SAR efficiency (ratio between transmit-field and maximum specific-absorption-rate level) using adjusted dielectric properties for neonate. A birdcage coil operating in circularly polarized mode was simulated for comparison. Validation of the simulation model was performed on phantom for the coil array.

Results

The 8-channel dipole array demonstrated up to 46% higher SAR efficiency levels compared to the birdcage coil in neonatal configurations, as the specific-absorption-rate levels were alleviated. An averaged normalized root-mean-square-error of 6.7% was found between measured and simulated transmit field maps on phantom.

Conclusion

The 8-channel dipole array design integrated for neonatal brain and cardiac MR was successfully demonstrated, in simulation with coverage of the baby and increased SAR efficiency levels compared to the birdcage. We conclude that the 8Tx-dipole array promises safe operating procedures for MR imaging of neonatal brain and heart at 7 T.

     

Microstructure and densification of ZrB2–SiC composites prepared by spark plasma sintering

ZrB₂–SiC composites were prepared by spark plasma sintering (SPS) at temperatures of 1800–2100 °C for 180–300 s under a pressure of 20 MPa and at higher temperatures of above 2100 °C without a holding time under 10 MPa. Densification, microstructure and mechanical properties of ZrB₂–SiC composites were investigated. Fully dense ZrB₂–SiC composites containing 20–60 mass% SiC with a relative density of more than 99% were obtained at 2000 and 2100 °C for 180 s. Below 2120 °C, microstructures consisted of equiaxed ZrB₂ grains with a size of 2–5 μm and α-SiC grains with a size of 2–4 μm. Morphological change from equiaxed to elongated α-SiC grains was observed at higher temperatures. Vickers hardness of ZrB₂–SiC composites increased with increasing sintering temperature and SiC content up to 60 mass%, and ZrB₂–SiC composite containing 60 mass% SiC sintered at 2100 °C for 180 s had the highest value of 26.8 GPa. The highest fracture toughness was observed for ZrB₂–SiC composites containing 50 mass% SiC independent of sintering temperatures.     

Investigation of electrochromic properties of poly(3,5-bis(4-methoxyphenyl)dithieno[3,2-b;2′,3′-d]thiophene)

Electropolymerization of 3,5-bis(4-methoxyphenyl)dithieno[3,2-b;2′,3′-d]thiophene BMPhDTT, having strong electron-donating methoxy groups, was performed, utilizing potentiodynamic method. The homopolymer was characterized by cyclic voltammetry (CV), Fourier transform infrared (FTIR) and UV–vis spectroscopy. Spectroelectrochemical and electrochromic properties of the homopolymer film were investigated and a PBMPhDTT/PEDOT device was constructed to understand its characteristics in detail. It was revealed that the potential range of 0.0–2.0 V is suitable for operating the device between yellow and blue colors. It indicated a good open circuit memory and stability.     

Sources and dechlorination of polychlorinated biphenyl congeners in the sediments of Fox River, Wisconsin

Polychlorinated biphenyl (PCB) congeners were analyzed in eight deep, dated sediment cores collected from the immediate upstream and downstream of DePere dam in Fox River, Wisconsin. The average time span of the cores is about 100 yr, except for one core (FR-9) which is influenced by mixing or covers a short time period (2 yr). The total PCB concentrations have a range of 0.2-6.8 ppm for the upstream and 0.3-17.6 ppm for the downstream cores. The PCB data obtained from the sampling were analyzed as upstream and downstream data, using a factor analysis (FA) model with nonnegative constraints to identify PCB sources and congener patterns. The factor loadings obtained from the FA model were interpreted in terms of the presence of possible environmental degradation mechanisms. In addition, a recently developed model, which is used to identify and quantify possible pathways of anaerobic dechlorination of PCBs in the sediments, was validated on the basis of in situ data from the literature, and then applied to the congener patterns obtained from the FA model. The major PCB source to the Fox River sediments is identified as Aroclor 1242, for both the upstream and the downstream sediments. Loss of di- and trichlorobiphenyls (e.g., 2-4, 25-2) from the sediments suggests desorption from the sediments. On the other hand, observation of elevated amounts of certain congeners such as 24-3 and 25-3 indicates the presence of anaerobic dechlorination activity. The anaerobic dechlorination model demonstrates significant similarities between the Aroclor 1242 profile altered according to dechlorination processes Q (upstream) and H' (downstream) and the dominant congener patterns obtained from the FA model.     

Using a chemical equilibrium model to predict amendments required to precipitate phosphorus as struvite in liquid swine manure

Precipitation of phosphate minerals from liquid swine manure is an established means of reducing the orthophosphate (OP) concentration. This project investigated the usefulness of a chemical equilibrium model, Visual Minteq, for prescribing the amendments needed to maximize struvite precipitation from liquid swine manure and thus reduce the OP phosphorus concentration. The actual concentrations of Mg(2+), Ca(2+), K(+), OP, NH(4)(+), alkalinity and pH from a liquid swine manure system were used as inputs to the model. The model was modified to remove species with extremely low formation rates, because they would not significantly precipitate in the reaction occurring in a short retention-time process such as those envisioned for swine manure struvite-formation reactors. Using the model's output, a series of 19-L reactors were used to verify the results. Verification results demonstrated that Visual Minteq can be used to pre-determine the concentration of amendments required to maximize struvite recovery.     

Role of sex, gender roles, and attraction in predicting emergent leaders.

Examined the influence of sex, gender role characteristics, and interpersonal attractiveness on the selection of emergent leaders. Data were collected on 2 occasions from 122 subjects in 28 task groups performing "sex neutral" tasks for valued rewards over many weeks of interaction. Results showed no significant difference in the proportion of men and women to emerge as leaders through intragroup sociometric choice. Regardless of sex, group members with masculine gender role characteristics emerged as leaders significantly more than those with feminine, androgynous, or undifferentiated gender role characteristics. Emergent leaders received significantly higher interpersonal attractiveness ratings than nonleaders within groups. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Physiological response to firefighting activities of various work cycles using extended duration and prototype SCBA

Firefighters’ self-contained breathing apparatus (SCBA) protects the respiratory system during firefighting but increases the physiological burden. Extended duration SCBA (>30 min) have increased air supply, potentially increasing the duration of firefighting work cycles. To examine the effects of SCBA configuration and work cycle (length and rest), 30 firefighters completed seven trials using different SCBA and one or two bouts of simulated firefighting following work cycles common in the United States. Heart rate, core temperature, oxygen consumption, work output and self-reported perceptions were recorded during all activities. Varying SCBA resulted in few differences in these parameters. However, during a second bout, work output significantly declined while heart rates and core temperatures were elevated relative to a single bout. Thirty seven per cent of the subjects were unable to complete the second bout in at least one of the two-bout conditions. These firefighters had lower fitness and higher body mass than those who completed all assigned tasks.

Practitioner Summary: The effects of extended duration SCBA and work/rest cycles on physiological parameters and work output have not been examined. Cylinder size had minimal effects, but extended work cycles with no rest resulted in increased physiological strain and decreased work output. This effect was more pronounced in firefighters with lower fitness.     

Dynamically adaptive real-time disparity estimation hardware using iterative refinement

The computational complexity of disparity estimation algorithms and the need of large size and bandwidth for the external and internal memory make the real-time processing of disparity estimation challenging, especially for High Resolution (HR) images. This paper proposes a hardware-oriented adaptive window size disparity estimation (AWDE) algorithm and its real-time reconfigurable hardware implementation that targets HR video with high quality disparity results. Moreover, an enhanced version of the AWDE implementation that uses iterative refinement (AWDE-IR) is presented. The AWDE and AWDE-IR algorithms dynamically adapt the window size considering the local texture of the image to increase the disparity estimation quality. The proposed reconfigurable hardware architectures of the AWDE and AWDE-IR algorithms enable handling 60 frames per second on a Virtex-5 FPGA at a 1024×768 XGA video resolution for a 128 pixel disparity range.     

Effect of CeO2 addition on densification and microstructure of Al2O3-YSZ composites

Alumina (Al₂O₃) and alumina-yttria stabilized zirconia (YSZ) composites containing 3 and 5 mass% ceria (CeO₂) were prepared by spark plasma sintering (SPS) at temperatures of 1350-1400 °C for 300 s under a pressure of 40 MPa. Densification, microstructure and mechanical properties of the Al₂O₃ based composites were investigated. Fully dense composites with a relative density of approximately 99% were obtained. The grain growth of alumina was inhibited significantly by the addition of 10 vol% zirconia, and formation of elongated CeAl₁₁O₁₈ grains was observed in the ceria containing composites sintered at 1400 °C. Al₂O₃-YSZ composites without CeO₂ had higher hardness than monolithic Al₂O₃ sintered body and the hardness of Al₂O₃-YSZ composites decreased from 20.3 GPa to 18.5 GPa when the content of ZrO₂ increased from 10 to 30 vol%. The fracture toughness of Al₂O₃ increased from 2.8 MPa m^1/2 to 5.6 MPa m^1/2 with the addition of 10 vol% YSZ, and further addition resulted in higher fracture toughness values. The highest value of fracture toughness, 6.2 MPa m^1/2, was achieved with the addition of 30 vol% YSZ.     

Understanding the Potential In Vitro Modes of Action of Bis(β-diketonato) Oxovanadium(IV) Complexes

To understand the potential in vitro modes of action of bis(β-diketonato) oxovanadium(IV) complexes, nine compounds of varying functionality have been screened using a range of biological techniques. The antiproliferative activity against a range of cancerous and normal cell lines has been determined, and show these complexes are particularly sensitive against the lung carcinoma cell line, A549. Annexin V (apoptosis) and Caspase-3/7 assays were studied to confirm these complexes induce programmed cell death. While gel electrophoresis was used to determine DNA cleavage activity and production of reactive oxygen species (ROS), the Comet assay was used to determine induced genomic DNA damage. Additionally, Förster resonance energy transfer (FRET)-based DNA melting and fluorescent intercalation displacement assays have been used to determine the interaction of the complexes with double strand (DS) DNA and to establish preferential DNA base-pair binding (AT versus GC).