Designing of low-power data oriented adders

The paper presents an idea of designing of low-power adders addressed to specific data processing. Mainly, the idea consists in proper choosing of 1-bit full adder cells for given probability of summed data, to obtain reduction in consumed power. Additionally different structures of the cells can be used, in one design, if it leads to reduction of power dissipation. To proper choice of structures of 1-bit full adders theirs energy characteristic versus summed data is needed. So, at the beginning we present results of assessment of a few 1-bit adder cells selected from literature and designed in UMC180 CMOS technology. The extended model of power consumption, taking into consideration input vector changes, was used, giving more accurate values than traditional model based on switching activity only. Thanks to the use of this model, obtained results allow detailed analysis of 1-bit adders on account of the using them in designing of low-power multi-bit adders summing specific data. Based on the results of analyses and given characteristic of summed data, appropriate full adder cells can be chosen to the final design of low-power data oriented adder. In specific case, cells which are made in different techniques can be used in multi-bit adder. A few examples are shown at the end of the paper.     

A Resonant Global Clock Distribution for the Cell Broadband Engine Processor

Resonant clock distributions have the potential to save power by recycling energy from cycle-to-cycle while at the same time improving performance by reducing the clock distribution latency and filtering out non-periodic noise. While these features have been successfully demonstrated in several small-scale experiments, there remained a number of concerns about whether these techniques would scale to a product application. By modifying the Cell broadband engine processor to incorporate a large resonant global clock network, power savings with full functionality is demonstrated over a 20% range in clock frequencies, and a 6-8 Watt power savings at 4 GHz. This was achieved by changing one wiring level and adding an additional thick copper level to create inductors and capacitors.     

NaCl-Induced Elicitation Alters Physiology and Increases Accumulation of Phenolic Compounds in Melissa officinalis L.

In nature, plants usually produce secondary metabolites as a defense mechanism against environmental stresses. Different stresses determine the chemical diversity of plant-specialized metabolism products. In this study, we applied an abiotic elicitor, i.e., NaCl, to enhance the biosynthesis and accumulation of phenolic secondary metabolites in Melissa officinalis L. Plants were subjected to salt stress treatment by application of NaCl solutions (0, 50, or 100 mM) to the pots. Generally, the NaCl treatments were found to inhibit the growth of plants, simultaneously enhancing the accumulation of phenolic compounds (total phenolics, soluble flavonols, anthocyanins, phenolic acids), especially at 100 mM NaCl. However, the salt stress did not disturb the accumulation of photosynthetic pigments and proper functioning of the PS II photosystem. Therefore, the proposed method of elicitation represents a convenient alternative to cell suspension or hydroponic techniques as it is easier and cheaper with simple application in lemon balm pot cultivation. The improvement of lemon balm quality by NaCl elicitation can potentially increase the level of health-promoting phytochemicals and the bioactivity of low-processed herbal products.     

The application of Langmuir–Blodgett technique in preparation of the macroporous titania coatings

The aim of this work was preparation of the macroporous titania coatings with the use of the sol–gel process and poly(methylmetacrylate) beads as a template. The effectiveness of the Langmuir–Blodgett (LB) and dip-coating (DC) methods in deposition of polymer beads on the silicon wafers was compared. Resulted polymer layers and final porous titania coatings were analyzed with the use of the atomic force microscope. It was found, that application of the LB is possible only when arachidic acid is present in the subphase. It should be highlighted, that the application of the LB method is the novelty between the methods of the polymer beads arrangement having the diameter of 200–300 nm. Main factors which influence the structure and the arrangement of polymer templates were the concentration of the polymer suspension and the rate of the substrate immersion/withdrawal from the suspension. We established, that the optimal concentrations for preparation of polymer templates, exhibiting good arrangement of individual beads, were 0.5 and 6 % for LB and DC methods, respectively. The size of pores of the obtained macroporous titania (200–330 nm) corresponds well with the size of the polymer beads used as the template (200–235 nm).     

Simultaneous Heat and Mass Transfer in Shrinkable Apple Slab During Drying

The goal of the study was to determine the influence of drying shrinkage on the kinetics of convection apple slab drying. The arbitrary Lagrange-Eulerian (ALE) method was used to enter a problem with moving boundaries. It was found that drying shrinkage had a major influence on the both simulated temperature and water content in the material. The lower the moisture content in particles during drying, the more pronounced the effect of shrinkage on simulation of heat and mass transfer. It was found that application of the arbitrary Lagrange-Eulerian method for shrinkage modeling leads to a relatively simple mathematical model of the drying kinetics of shrinkable materials.     

EPIP-Evoked Modifications of Redox,Lipid, and Pectin Homeostasis in the Abscission Zone of Lupine Flowers

Yellow lupine is a great model for abscission-related research given that excessive flower abortion reduces its yield. It has been previously shown that the EPIP peptide, a fragment of LlIDL (INFLORESCENCE DEFICIENT IN ABSCISSION) amino-acid sequence, is a sufficient molecule to induce flower abortion, however, the question remains: What are the exact changes evoked by this peptide locally in abscission zone (AZ) cells? Therefore, we used EPIP peptide to monitor specific modifications accompanied by early steps of flower abscission directly in the AZ. EPIP stimulates the downstream elements of the pathway—HAESA and MITOGEN-ACTIVATED PROTEIN KINASE6 and induces cellular symptoms indicating AZ activation. The EPIP treatment disrupts redox homeostasis, involving the accumulation of H₂O₂ and upregulation of the enzymatic antioxidant system including superoxide dismutase, catalase, and ascorbate peroxidase. A weakening of the cell wall structure in response to EPIP is reflected by pectin demethylation, while a changing pattern of fatty acids and acyl lipids composition suggests a modification of lipid metabolism. Notably, the formation of a signaling molecule—phosphatidic acid is induced locally in EPIP-treated AZ. Collectively, all these changes indicate the switching of several metabolic and signaling pathways directly in the AZ in response to EPIP, which inevitably leads to flower abscission.