Effects of ozonized water and heat treatment on the papaya fruit epidermis

This study examined the effects of O₃ and hot water treatments on the epidermis of Golden papaya fruit. Heat treatments were applied in a hot water brushing (HWB) system. Papayas were brushed under a pressurized hot water rinse stage at 45, 55 and 65 °C for 60 s. In the HWB treatment, 4 ppm ozone was applied to the papayas for 1 or 2 min. The results show that ozone applications did not affect the fruit's cuticular surface, while heat treatments allowed natural fissures on the fruit epidermis to recover. Several crystalloid forms were identified on the epidermis of the papayas after the heat treatments. The predominant crystalloid forms on papayas are tubular and there is a positive response to temperature; the higher the temperature, the larger and more frequent the tubular crystalloids.     

An energy efficient middleware for an ad-hoc AAL wireless sensor network

DIA (Dispositivo Inteligente de Alarma, in Spanish) is an AAL (Ambient Assisted Living) system that allows to infer a potential dangerous action of an elderly person living alone at home. This inference is obtained by a specific sensorisation with sensor nodes (portables and fixes) and a reasoning layer embedded in a PC that learns of the users behaviour patterns and advices when actual one differs significantly of the normal patterns. In AAL systems, energy is a limited resource therefore sensor devices need to be properly managed to conserve energy. In this paper, we introduce the design and implementation of innovative and specific mechanisms at the sensory layer middleware which is capable of, first to discriminate spurious motion detections assuming that these signals do not resemble the patterns of real motion detections and, second to reduce the dynamics of messages by a sensor signal processing in order to compress the whole information in one single event. The middleware achieves power saving by modifying the raw information from sensors and adapting it to the predefined semantic of the reasoning layer. It manages the important task of data processing from sensors (raw information), and transfers the pre-processed information into the top layer of reasoning in a more energy efficient way. We also address the trade-off between reducing power consumption and reducing delay for incoming data. We present results from experiments using our implementation of these mechanisms at the middleware that comprises from node firmware to the PC driver. The number of messages of the proposed method with respect to the raw data is reduced by approximately 98.5%. The resources used in the PIR signal processing is reduced by approximately 85%. The resulting delay introduced is small (10–19 s) but system dynamics is slow enough to avoid contextualisation errors or reduction of system performance. We consider these results as very satisfactory.     

Designing a personal informatics system for users without experience in self-tracking: a case study

Thanks to the advancements in ubiquitous and wearable technologies, Personal Informatics (PI) systems can now reach a larger audience of users. However, it is not still clear whether this kind of tool can fit the needs of their daily lives. Our research aims at identifying specific barriers that may prevent the widespread adoption of PI and finding solutions to overcome them. We requested users without competence in self-tracking to use different PI instruments during their daily practices, identifying five user requirements by which to design novel PI tools. On such requirements, we developed a new system that can stimulate the use of these technologies, by enhancing the perceived benefits of collecting personal data. Then, we explored how naïve and experienced users differently explore their personal data in our system through a user trial. Results showed that the system was successful at helping individuals manage and interpret their own data, validated the usefulness of the requirements found and inspired three further design opportunities that could orient the design of future PI systems.     

Characterization and properties of blended cement matrices containing activated bamboo leaf wastes

The worldwide production of bamboo generates large volumes of leaf wastes, which are deposited in landfills or burned in an uncontrolled manner, with negative effects in the environment. The ash obtained by calcining of the bamboo leaf waste, shows good qualities as supplementary cementing material for the production of blended cements.The current paper shows a detailed scientific study of a Brazilian bamboo leaf ash (BLA) calcined at 600 °C in small scale condition, by using different techniques (XRF, XRD, SEM/EDX, FT–IR, TG/DTG) and technical study in order to analyse the behaviour of this ash in blended cements elaborated with 10% and 20% by mass of BLA. The results stated that this ash shows a very high pozzolanic activity, with a reaction rate constant K of the order of 10^?1/h and type I CSH gel was the main hydrated phase obtained from pozzolanic reaction. The BLA blended cements (10% and 20%) complied with the physical and mechanical requirements of the existing European standards.     

Adaptive controller placement for wireless sensor–actuator networks with erasure channels

Wireless sensor–actuator networks offer flexibility for control design. One novel element which may arise in networks with multiple nodes is that the role of some nodes does not need to be fixed. In particular, there is no need to pre-allocate which nodes assume controller functions and which ones merely relay data. We present a flexible architecture for networked control using multiple nodes connected in series over analog erasure channels without acknowledgments. The control architecture proposed adapts to changes in network conditions, by allowing the role played by individual nodes to depend upon transmission outcomes. We adopt stochastic models for transmission outcomes and characterize the distribution of controller location and the covariance of system states. Simulation results illustrate that the proposed architecture has the potential to give better performance than limiting control calculations to be carried out at a fixed node.     

Investigation of the Equivalence of National Dew-Point Temperature Realizations in the ?50?°C to +?20?°C Range

In the field of humidity quantities, the first CIPM key comparison, CCT-K6 is at its end. The corresponding European regional key comparison, EUROMET.T-K6, was completed in early 2008, about 4?years after the starting initial measurements in the project. In total, 24 NMIs from different countries took part in the comparison. This number includes 22 EURAMET countries, and Russia and South Africa. The comparison covered the dew-point temperature range from ?50?°C to +20?°C. It was carried out in three parallel loops, each with two chilled mirror hygrometers as transfer standards in each loop. The comparison scheme was designed to ensure high quality results with evenly spread workload for the participants. It is shown that the standard uncertainty due to the long-term instability was smaller than 0.008?°C in all loops. The standard uncertainties due to links between the loops were found to be smaller than 0.025?°C at ?50?°C and 0.010?°C elsewhere. Conclusions on the equivalence of the dew-point temperature standards are drawn on the basis of calculated bilateral degrees of equivalence and deviations from the EURAMET comparison reference values (ERV). Taking into account 16 different primary dew-point realizations and 8 secondary realizations, the results demonstrate the equivalence of a large number of laboratories at an uncertainty level that is better than achieved in other multilateral comparisons so far in the humidity field.     

Public Service Broadcasting's Participation in the Reconfiguration of Online News Content1

This article analyses public service broadcasting in Europe, looking at public broadcasters' role as promoters of participative processes. Computer‐mediated communication and studies rooted in mediated human interactivity are used to explore participative elements provided by digital technology, and how these can be incorporated into the news websites, through an empirical study of 5 case studies in the European market. The analysis is based on the methodology of content analysis with the goal of outlining the particularities of the participative elements implemented by each broadcaster and revealing the most common participative strategies. The findings suggest that although public service broadcasters offer a wide variety of possibilities, encouraging audiences to take on more active roles, their role is still peripheral and complementary.     

Antioxidant mechanism of grape procyanidins in muscle tissues: Redox interactions with endogenous ascorbic acid and α-tocopherol

The present study investigates the antioxidant mechanism of grape procyanidins and, in particular, their aptitude to establish redox interactions with two important components of the endogenous antioxidant system of muscle tissues, α-tocopherol (α-TOH) and ascorbic acid (AA). To this end, the progress of lipid oxidation was monitored in fish muscle supplemented with grape procyanidins at the concentrations usually employed in antioxidant food applications, and then related to the redox stability of the endogenous α-TOH and AA. In addition to the lipid oxidation protective effect, the incorporation of procyanidins also provided an improvement of the redox stability of the endogenous components in a straight procyanidinic concentration-dependent manner. Results showed the capacity of procyanidins to repair oxidised α-TOH at medium-long term, and to delay the AA depletion. Therefore, such cooperative redox interaction of exogenous procyanidins adequately complements the natural α-TOH regenerative system supplied by AA that is efficient at the early post mortem stages.