Design and implementation of a wide-band real-time mobile channelemulator

A new wide-band mobile channel emulator for the CODIT project is designed and implemented. The UMTS code-division testbed (CODIT R2020) is a research project within the European RACE-II program set up by the Commission of the European Community. Our goal is to be able to simulate in the laboratory, in real time, the multipath propagation found in the mobile radio channel. As code-division multiple access (CDMA) is the access technique within the CODIT project, it was realized that the channel emulator must have simultaneously good delay resolution between propagation paths and long duration of the impulse response. These considerations led to a very flexible channel emulator specifically designed to host the new wide-band channel models developed within the CODIT project. Our emulator features three independent inputs and two outputs, up to 20 complex propagation paths, 10-MHz radio frequency (RF) bandwidth, a delay resolution of 50 ns, and a maximum duration of the channel impulse response of 80 μs. Starting with an explanation of the global structure of the new channel emulator, we derive the optimum design of the interpolation procedures and present the main implementation issues arising from our initial architecture. Finally, we report the results of the laboratory tests of the first prototype of the channel emulator     

Effects of dietary crude protein concentration on late-lactation dairy cow performance and indicators of nitrogen utilization

The objectives of this study were to measure performance responses and to evaluate indictors of N utilization in late-lactation cows fed diets with incremental reductions in crude protein (CP) concentration. Holstein cows (n = 128; 224 ± 54 d in milk) were stratified by parity and days pregnant (86 ± 25 d) and randomly assigned to 1 of 16 pens in a randomized complete block design. For 3 wk, all cows received a covariate diet containing 16.9% CP [dry matter (DM) basis]. For the subsequent 12 wk, pens were randomly assigned to 1 of 4 treatments that contained 16.2, 14.4, 13.1, or 11.8% CP (DM basis). Diets were offered once daily and contained 32.5% corn silage, 32.5% alfalfa silage, 13.5% high-moisture corn, and 21.5% concentrate mix. A reduction in dietary CP was achieved by replacing soybean meal with soy hulls in the concentrate mix (DM basis). Dry matter intake, milk urea N (MUN; mg/dL), and the yield of milk urea N (g/d) decreased linearly with dietary CP. Compared with a 16.2% CP diet, a 14.4% CP diet did not alter milk yield throughout the study, but the 13.1 and 11.8% CP diets reduced milk yield after 4 and 1 wk, respectively. Furthermore, milk protein percentage was reduced for all dietary CP less than 16.2%, but this negative effect was temporary and disappeared after 7 wk for the 14.4% CP diet. In contrast, MUN adjusted to a new steady state within 1 wk for all dietary treatments. Modeling quadratic responses with a plateau led to predictions of no reduction in fat- and protein-corrected milk (32.6 kg/d) and yields of fat (1.31 kg/d), lactose (1.49 kg/d), and true protein (1.12 kg/d) until dietary CP decreased below 15.5, 15.3, 15.9, and 16.2%, respectively. In this study, MUN and the yield of MUN were highly correlated with N intake, milk protein yield, and fat- and protein-corrected milk. Surprisingly, N use efficiency (milk protein N/intake N) was not correlated with any variables related to N utilization and reached an apparent upper limit of approximately 30%. Although this observation may be associated with feeding diets deficient in metabolizable protein, late-lactation cows in this study adjusted to low dietary CP concentration better than anticipated as milk production was 2.6, 3.6, 6.4, and 8.0 kg/d higher than National Research Council (2001)-predicted metabolizable protein-allowable milk for dietary CP of 16.2, 14.4, 13.1, and 11.8%, respectively.     

Application of an entry–exit tariff model to the gas transport system in Spain

Under an entry–exit gas tariff system, reservation of capacity is split into entry capacity, to transport gas from the injection points to a virtual balancing point, and exit capacity, to transport gas from the balancing point to the exit points in the system.     

Effect of <Emphasis Type="Italic">Punica granatum</Emphasis> peel and <Emphasis Type="Italic">Melia azedarach</Emphasis> bark extracts on durability of European beech and maritime pine

A method to improve wood durability using natural extracts was evaluated. Wood deterioration is a condition caused by several abiotic and biotic factors including fungal contamination. To date, approaches aiming at the reduction of these contaminants mainly involve the use of chemicals agents. Natural products could represent an alternative strategy. Aqueous extracts of Punica granatum L. (pomegranate) peel and Melia azedarach L. barks were evaluated as antifungal agents to improve natural durability of beech wood and maritime pine. To evaluate the effect of treatments under simulated accelerated ageing of wood by natural conditions, impregnation and leaching tests were performed. Results demonstrated that samples impregnated with pomegranate or M. azedarach solutions notably increased the biological resistance of wood in a dose-dependent manner. These results were confirmed by the reduction in weight losses in treated samples even after 6 weeks of fungal exposure. Moreover, after leaching tests, 20 and 7% (w/v) of pomegranate and M. azedarach extract solutions were demonstrated as the better concentrations to enhance wood durability. Total phenol content and characterization of the phenolic compounds in both, natural extracts and wood samples were analyzed by Folin–Ciocalteu assay and HPLC-DAD. In conclusion, it was demonstrated that the present method can be considered as an effective treatment to increase wood durability while it proposes the valorization of natural extractives in wood industry.     

Remote Detection of a Frequency Jammer Operating in the Down Link of a Cellular System

The authors propose a novel method to evaluate the interference conditions in a cellular network. The method takes advantage of the signal strength and quality measurements available at a Base Station. Measurements from both up-link and down-link are jointly processed to remotely detect the presence of a medium-range frequency jammer and other situations involving abnormal interference levels, as a malfunctioning of the power control algorithm, a bad radio optimization and planning or an outer interference, among others. The proposed method can be adapted to any cellular system. In this paper we focus on its application to GSM/GPRS system. We include some experiments where real cell data recordings were analyzed.     

Technical note: development of a tool to insert abomasal infusion lines into dairy cows

A tool was developed to aid in ruminal insertion of abomasal infusion lines into dairy cows. The tool consisted of 2 pieces cut from polyvinyl chloride pipe. The first piece of pipe, the insertion tool, contained a groove that held the flexible plastic flange that is on the end of the infusion line. The insertion tool containing the flange was inserted into the ruminal cannula, through the sulcus omasi, and into the abomasum. The second piece of pipe, the delivery tool, was threaded through the insertion tool, and it was used to dislodge the flange from the insertion tool and into the abomasum.     

Kaolin–epoxy‐based nanocomposites: A complementary study of the epoxy curing by FTIR and fluorescence

This work is focused on the study of the effect exerted by the presence of kaolin on the cure reaction of an epoxy‐based polymer, discussing the influence of different kaolin pretreatments. During the last few years, the interest on polymer matrix nanocomposite materials has sharply increased because generally they show improved properties when compared with those of the neat polymer (without filler). Among this sort of materials, polymer clay nanocomposites have been widely studied. However, there are not many works about kaolin‐based composites. Although several techniques have been used to monitor the cure process in epoxy‐based composites such as Fourier transform infrared spectroscopy (FTIR) or differential scanning calorimetry, only the use of the fluorescent response from a fluorophore seems to be adequate to monitor the reaction exactly at the interfaces at a molecular scale. In this work, FTIR and fluorimetry were used to monitor the cure reaction of the different composite systems at different curing temperatures. The analysis of FTIR experiments revealed that the presence of the reinforcement clay affects the extent of the cure reaction depending on the nature of its surface. On the other hand, the use of a fluorescent molecule chemically bonded to the reinforcement allows studying the curing exactly at the interface. Finally, with the collected data, a kinetic analysis was done and the results obtained were compared in terms of the technique used and the information source (interface or bulk). At the interface, the activation energy for the epoxy reaction is lower than that carried out in the bulk indicating that the reaction at the interface proceeds via a particular mechanism for which the reaction is favored. It seems that a higher amount of hydroxyl groups is capable of catalyzing the cure reaction. POLYM. COMPOS., 2010. © 2009 Society of Plastics Engineers     

Parkinsonian gait patterns quantification from principal geodesic analysis

Pattern Analysis and Applications - Parkinson is a neuromotor disease caused by dopamine deficiency that produces progressive alterations in locomotion. Gait analysis is a primary alternative to...