Enhanced real-time ECG coder for packetized telecardiology applications.

A new real-time compression method for electrocardiogram (ECG) signals has been developed based on the wavelet transform approach. The method is specifically adaptable for packetized telecardiology applications. The signal is segmented into beats and a beat template is subtracted from them, producing a residual signal. Beat templates and residual signals are coded with a wavelet expansion. Compression is achieved by selecting a subset of wavelet coefficients. The number of selected coefficients depends on a threshold which has different definitions depending on the operational mode of the coder. Compression performance has been tested using a subset of ECG records from MIT-BIH Arrhythmia database. This method has been designed for real-time packetized telecardiology scenarios both in wired and wireless environments.     

Effects of feeding formate-treated alfalfa silage or red clover silage on the production of lactating dairy cows

In trial 1, 15 Holsteins were fed 3 total mixed rations (TMR) with 33% neutral detergent fiber in 3 × 3 Latin squares (28-d periods). Two TMR contained (dry matter basis): 40% control alfalfa silage (CAS) or 40% ammonium tetraformate-treated alfalfa silage (TAS), 20% corn silage (CS), 33% high-moisture shelled corn (HMSC), 6% solvent soybean meal (SSBM), and 18% crude protein (CP); the third TMR contained 54% red clover silage (RCS), 6% dried molasses, 33% HMSC, 6% SSBM, and 16.3% CP. Silages differed in nonprotein N (NPN) and acid detergent insoluble N (ADIN; % of total N): 50 and 4% (CAS); 45 and 3% (TAS); 27 and 8% (RCS). Replacing CAS with TAS increased intake, yields of milk, fat-corrected milk, protein, and solids-not-fat, and apparent dry matter and N efficiency. Replacing CAS with RCS increased intake and N efficiency but not milk yield. Replacing CAS or TAS with RCS lowered milk urea N, increased apparent nutrient digestibility, and diverted N excretion from urine to feces. In trial 2, 24 Holsteins (8 ruminally cannulated) were fed 4 TMR in 4 × 4 Latin squares (28-d periods). Diets included the CAS, TAS, and RCS (RCS1) fed in trial 1 plus an immature RCS (RCS2; 29% NPN, 4% ADIN). The CAS, TAS, and RCS2 diets contained 36% HMSC and 3% SSBM and the RCS1 diet contained 31% HMSC and 9% SSBM. All TMR had 50% legume silage, 10% CS, 27% neutral detergent fiber, and 17 to 18% CP. Little difference was observed between cows fed CAS and TAS. Intakes of DM and yields of milk, fat-corrected milk, fat, protein, lactose, and solids-not-fat, and milk fat and protein content were greater on alfalfa silage vs. RCS. Blood urea N, milk urea N, ruminal ammonia, and total urinary N excretion were reduced on RCS, suggesting better N utilization on the lower NPN silage. Apparent N efficiency tended to be higher for cows fed RCS but there was no difference when N efficiency was expressed as kilograms of milk yield per kilogram of total N excreted.     

Spectral Dependence of the Energy Transfer from Photosynthetic Complexes to Monolayer Graphene

Fluorescence excitation spectroscopy at cryogenic temperatures carried out on hybrid assemblies composed of photosynthetic complexes deposited on a monolayer graphene revealed that the efficiency of energy transfer to graphene strongly depended on the excitation wavelength. The efficiency of this energy transfer was greatly enhanced in the blue-green spectral region. We observed clear resonance-like behavior for both a simple light-harvesting antenna containing only two chlorophyll molecules (PCP) and a large photochemically active reaction center associated with the light-harvesting antenna (PSI–LHCI), which pointed towards the general character of this effect.     

PVDF/BaTiO3/carbon nanotubes ternary nanocomposites prepared by ball milling: Piezo and dielectric responses

Nanocomposites based on poly(vinylidene fluoride) (PVDF) filled with barium titanate, BaTiO₃, (BT) particles, and multiwalled carbon nanotubes (MWCNTs) were prepared by high-energy ball milling (HEBM) and subsequent hot pressing. This method of materials preparation allowed obtaining uniform dispersions of the nanofillers. The influence of the particles on the polymer structure and morphology was studied. To understand the origin of changes in the PVDF properties, thermal and electrical behaviors of the PVDF/BT/MWCNT nanocomposites were studied as a function of composition. The addition of BT, MWCNT, or its mixture had not any influence on the PVDF polymorphism. However, calorimetric results pointed out that the presence of the nanofillers exerted nucleation mainly ascribed to the surface to volume ratio of the nanoparticles. The capacitance of the composites increased as the nanofiller content increased, being the effect mainly dependent on the surface to volume ratio of the nanoparticles. The dielectric behavior of the materials as a function of frequency was modeled by a Debye equivalent circuit only below the percolation threshold respect to the amount of MWCNT. The piezoelectric behavior of the ternary nanocomposites was highly affected by the incorporation of the nanofillers only when high dielectric losses occurred above the percolation threshold. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47788.     

Composites formed by glass fibers and PS‐modified epoxy matrix. Influence of the glass fibers surface on the morphologies and mechanical properties of the interphases generated

In this work, the influence of the nature of the reinforcement surface on the interfacial morphologies developed in E‐glass fibers/polystyrene (PS)‐modified epoxy composites has been studied. Different surface modifications of the fibers were considered. In a complementary way, morphological analysis and nanoindentation measurements were carried out using atomic force microscopy to subsequently correlate the interfacial structure with the morphologies observed. In every composite, reaction‐induced phase separation happened with a morphology composed of PS‐rich domains immersed in an epoxy‐rich phase. However, depending on the surface modification of the glass fibers, different distributions of PS‐rich domains at the interfaces were obtained. The results were interpreted in terms of a gradual phase separation process because of stoichiometric gradients from the glass fibers surface to the matrix bulk caused by specific segregation of one of the components of the reactive epoxy mixture to the fibers occurs. It was concluded that specific and controlled reinforcement modification allows obtaining tailored interfaces formed by a polymer blend and a reinforcement in which the morphology can be previously selected. POLYM. COMPOS., 2010. © 2009 Society of Plastics Engineers     

Characterization of repolarization alternans during ischemia: time-course and spatial analysis

T-wave alternans (TWA) has been linked to increased vulnerability to ventricular fibrillation in different settings including myocardial ischemia. In this study, we propose a methodology for the characterization of TWA induced by transient, regional ischemia. We studied the prevalence, magnitude and spatio-temporal relationship between TWA and ischemia in 95 patients undergoing percutaneous transluminal coronary angioplasty (PTCA). Two electrocardiogram records of each patient, a control recording before PTCA and the PTCA record, were analyzed using a robust, recently proposed method for TWA analysis. The detected episodes were characterized in terms of their time-course, lead distribution and alternans waveform. One third of the patients (33.7%) showed TWA episodes during PTCA. The highest prevalence (51.7%) and amplitude were found in patients with left anterior descendent artery occlusion. The onset of TWA was detected after the first 1-2 min of occlusion, suggesting that some level of ischemia must be attained before TWA arises, while disappearance of TWA following reperfusion was much more rapid. The TWA lead distributions and waveforms showed distinct distributions according to the occluded artery reflecting the regional nature of the TWA phenomenon.     

Effect of dietary crude protein concentration on ruminal nitrogen metabolism in lactating dairy cows

Ten lactating Holstein cows fitted with ruminal cannulas that were part of a larger feeding trial were blocked by days in milk into 2 groups and then randomly assigned to 1 of 2 incomplete 5 × 5 Latin squares. Diets contained [dry matter (DM) basis] 25% alfalfa silage, 25% corn silage, and 50% concentrate. Rolled high-moisture shelled corn was replaced with solvent-extracted soybean meal to increase crude protein (CP) from 13.5% to 15.0, 16.5, 17.9, and 19.4% of DM. Each of the 4 experimental periods lasted 28 d with data and sample collection performed during the last 8 d. Digesta samples were collected from the omasum to quantify the ruminal outflow of different N fractions. Intake of DM was not affected but showed a quadratic trend with maxima of 23.9 kg/d at 16.5% CP. Ruminal outflow of total bacterial nonammonia N (NAN) was not different among diets but a significant linear effect of dietary CP was detected for this variable. Bacterial efficiency (g of total bacterial NAN flow/kg of organic matter truly digested in the rumen) and omasal flows of dietary NAN and total NAN also showed positive linear responses to dietary CP. Total NAN flow increased from 574 g/d at 13.5% CP to 688 g/d at 16.5% CP but did not increase further with the feeding of more CP. Under the conditions of this study, 16.5% of dietary CP appeared to be sufficient for maximal ruminal outflow of total bacterial NAN and total NAN.     

Optimising the inactivation of grape juice spoilage organisms by pulse electric fields

The effect of some pulsed electric field (PEF) processing parameters (electric field strength, pulse frequency and treatment time), on a mixture of microorganisms (Kloeckera apiculata, Saccharomyces cerevisiae, Lactobacillus plantarum, Lactobacillus hilgardii and Gluconobacter oxydans) typically present in grape juice and wine were evaluated. An experimental design based on response surface methodology (RSM) was used and results were also compared with those of a factorially designed experiment. The relationship between the levels of inactivation of microorganisms and the energy applied to the grape juice was analysed. Yeast and bacteria were inactivated by the PEF treatments, with reductions that ranged from 2.24 to 3.94 log units. All PEF parameters affected microbial inactivation. Optimal inactivation of the mixture of spoilage microorganisms was predicted by the RSM models at 35.0 kV cm^− 1 with 303 Hz pulse width for 1 ms. Inactivation was greater for yeasts than for bacteria, as was predicted by the RSM. The maximum efficacy of the PEF treatment for inactivation of microorganisms in grape juice was observed around 1500 MJ L^− 1 for all the microorganisms investigated. The RSM could be used in the fruit juice industry to optimise the inactivation of spoilage microorganisms by PEF.     

A reduction in milking frequency and feed allowance improves dairy cow immune status

Twice-daily milking is the most common milking regimen used globally. A reduction in milking frequency to once daily, combined with a reduced feed allowance (FA), could reduce the physiological stress associated with the transition to peak milk production, and hence improve immune function. This study investigated how milking frequency and FA affect dairy cow immune status. Cows (n = 48) were milked once a day (OAD) or twice a day (TAD) on 1 of 2 FA: high (HFA) or low (LFA), in a 2 × 2 factorial arrangement of treatments. After the mean calving date of March 11, HFA cows were offered ad libitum grass silage and 7 kg of concentrates/cow per day until March 22, then 4 kg of concentrates/cow per day until April 17, and thereafter allocated 31.3 kg of dry matter (DM) grass/cow per day. The LFA cows were offered 4 kg of concentrates/cow per day, 1 kg of concentrates/cow per day, and allocated 19 kg of DM grass/cow per day for the same respective periods. Milk yield was recorded daily and body condition score weekly, and somatic cell count was performed at approximately 2-wk intervals. Blood samples were collected prepartum (d -7 to -1) and at d 1 to 7, d 14 to 21, and d 42 to 49 postpartum. Total and differential leukocyte percentage, IFN-γ production in response to concanavalin A and phytohemagglutinin, and cortisol, haptoglobin (Hp), and serum amyloid A (SAA) concentrations were evaluated. Cows milked OAD had reduced milk yield and body reserve mobilization, but higher somatic cell counts. Milking frequency and diet had no effect on total leukocyte counts. Cows milked OAD had a higher lymphocyte percentage and lower monocyte percentage, and tended to have a lower neutrophil percentage than cows milked TAD. In addition, the LFA cows had a higher eosinophil percentage than cows fed the HFA. Milking frequency and diet had no effect on IFN-γ, Hp, SAA, or cortisol production. Utilization of strategies to reduce milk yield at the beginning of the lactation could not only reduce body reserve mobilization, but also help to maintain a functioning immune system, and thus improve cow welfare.     

Influence of thermal treatment and aging time on the stability and swelling properties of nano/micron-sized polymeric spheres for improved oil recovery application

Understanding the knowledge of swelling and stability properties of polymeric spheres are essential for improved oil recovery; these properties will allow guaranteeing an efficient block of high permeability channels and large pore throats. These properties of nano/micron-sized polymeric spheres commercially available for improved oil recovery applications were investigated. The polymeric spheres emulsion was characterized by scanning electron microscopy (SEM). Data analysis reveals uniform and spherical structures with an average diameter of 47 ± 4.8 nm. After hydration, polymeric spheres can swell due to water absorption reaching an average particle diameter of 3.3 ± 0.2 μm. The effect of aging time, thermal treatment, the removal of the oil phase, and the dispersing stabilizer on the swelling and stability was studied. It has been found that polymeric spheres structure suffers deterioration with the progressive aging time, temperature increase, and with the removal of the oil phase and dispersing stabilizer. As a result, crosslinked polymer aggregates are formed which subsequently acquiring fibrillar morphologies. Further, this study provides an understanding of the stability and swelling behavior of polymeric microspheres using polydimethylsiloxane microdevices. The results evidenced that the behavior of the polymeric spheres can be beneficial to improve oil recovery. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 48030.