On the failure mode in dry and hygrothermally aged short fiber-reinforced injection-molded polyarylamide composites by acoustic emission

The failure mode in injection-molded short glass (GF) and carbon fiber (CF) reinforced polyarylamide (PAR) composites was studied on compact tension (CT) specimens in as-received (AR), hygrothermally aged (HA) and re-dried (RD) states, respectively, using acoustic emission (AE) and fractography. A significant difference was revealed in the failure manner characterized by the cumulative run, amplitude and energy distribution of the AE events as a function of the water content of the composites. Furthermore, a correlation was found between the cumulative AE events up to the maximum load and the fracture toughness of the composites. It was shown that the fracture response and thus the failure behavior of the water-saturated PAR composites can be restored by drying. This fact indicates that the water absorption and desorption are of a purely physical nature, i.e. they are reversible processes. It was established that chopped fiber-reinforced PAR composites fail by matrix deformation along with fiber/matrix debonding in the crack initiation, whereas fiber pull-out becomes dominant in the crack propagation range. Water uptake shifts both the AE amplitude and energy curves toward lower values, a phenomenon attributed to plastification of the PAR matrix by water.On leave from Institute of Machine Parts, Technical University of Budapest, H-1111 Budapest, Hungary.On leave from School of Industrial Technology, Universiti Sains Malaysia, 11800 Penang, Malaysia.     

Breeding habitats of Aedes aegypti (L) and Aedes. albopictus (Skuse) in villages of Barru, South Sulawesi, Indonesia

The breeding habitats of the dengue vector, Aedes aegypti and Aedes albopictus, were studied using larval collection method inside and outside houses in 6 villages of Barru, South Sulawesi, Indonesia from July 1994 to August 1995. Aedes aegypti was the dominant species, being abundant indoors especially in the coastal areas. Aedes albopictus was breeding primarily in outdoor containers in the hill and mountain areas. Earthen jar was the most common breeding habitat of Aedes aegypti in all villages surveyed. Drum can was the most common outdoor breeding habitat of Aedes albopictus in the hill and mountain areas. The high Breteau indices of Aedes aegypti and Aedes albopictus suggests that these species may play an important role in the transmission of dengue hemorrhagic fever in Barru where epidemics of the fever occur occasionally.     

Effects of display design on performance in a simulated ship navigation environment

Although automation is playing an increasing role on the ship's bridge, empirical research on the effectiveness of alternative bridge designs is limited. In this paper, we describe an experimental study of the benefits of integrated information display, using a computerized simulation of a highly automated ship's bridge. The study compared three types of interface design, which presented radar and electronic chart information to the operator in different ways: (a) integrated display, (b) functionally-separate display, and (c) spatially-separate display. Effects were examined in relation to time on watch and scenario complexity. Following extensive training on the task, 39 participants were tested over a 4-h experimental session, during which they encountered a sequence of collision scenarios of varying complexity. Using a dual-task methodology, a range of measures of primary and secondary task performance were taken, together with assessment of information sampling behaviour and subjective operator state (workload, fatigue, anxiety and situation awareness). The results indicated slight navigational advantages of the integrated display over the two alternative display types, although it also incurred higher levels of operator cost, particularly fatigue. There were no marked effects of time on watch, but more complex scenarios were associated with impaired performance, increased workload and reduced situation awareness. Overall, the findings have suggested some benefits of integrating primary information sources in a ship's bridge environment. The study further confirms the value of experimental simulations as tools for investigating design issues for ship's bridge automation.     

Granulomas and cholestatic--hepatocellular injury associated with phenylbutazone. Report of two cases

A combined cholestatic-hepatocellular injury and noncaseating granulomas occurred in two patients 1 and 4 weeks after phenylbutazone therapy. Both patients were jaundiced, one had a macular rash, and both had peripheral blood eosinophilia. Symptoms and signs subsided, and abnormal findings from tests of hepatic function rapidly returned to normal following withdrawal of the drug. Sections of liver biopsy specimens 6 months later showed no granulomas or other pathologic changes. Previously reported cases are reviewed.     

Development and test of a new catalytic converter for natural gas fuelled engine

This paper presents characteristics of a new catalytic converter (catco) to be used for natural gas fuelled engine. The catco were developed based on catalyst materials consisting of metal oxides such as titanium dioxide (TiO₂) and cobalt oxide (CoO) with wire mesh substrate. Both of the catalyst materials (such as TiO₂ and CoO) are inexpensive in comparison with conventional catalysts (noble metals) such as palladium or platinum. In addition, the noble metals such as platinum group metals are now identified as human health risk due to their rapid emissions in the environment from various resources like conventional catalytic converter, jewelers and other medical usages. It can be mentioned that the TiO₂/CoO based catalytic converter and a new natural gas engine such as compressed natural gas (CNG) direct injection (DI) engine were developed under a research collaboration program. The original engine manufacture catalytic conveter (OEM catco) was tested for comparison purposes. The OEM catco was based on noble metal catalyst with honeycomb ceramic substrate. It is experimentally found that the conversion efficiencies of TiO₂/CoO based catalytic converter are 93%, 89% and 82% for NO_x, CO and HC emissions respectively. It is calculated that the TiO₂/CoO based catalytic converter reduces 24%, 41% and 40% higher NO_x, CO and HC emissions in comparison to OEM catco respectively. The objective of this paper is to develop a low-cost three way catalytic converter to be used with the newly developed CNG-DI engine. Detailed review on catalytic converter, low-cost catalytic converter development characteristics and CNGDI engine test results have been presented with discussions.     

Rheological and mechanical properties of dynamically cured poly(vinyl chloride)/nitrile butadiene rubber thermoplastic elastomers

Plasticized poly(vinyl chloride)/nitrile butadiene rubber (PVC/NBR) thermoplastic elastomers (TPEs) were dynamically cured in the melt stage with the incorporation of a semi‐efficient curing system using a Brabender Plasticorder at 150 °C and rotor speed of 50 rev min^?1. Sulfur concentration was progressively increased from zero to 1 part per hundred NBR to study the effect of dynamic curing on mechanical and rheological behaviour of the TPEs. The compounds were characterized in respect of their rheological and mechanical properties. The effectiveness of dynamic curing was studied using Brabender plastograms, a moving disc rheometer and swelling index measurement. The mechanical properties investigated include tensile strength, elongation at break, modulus at 100% elongation, tear strength and hardness. The influence of thermooxidative ageing on the mechanical properties was investigated by incubating the PVC/NBR TPEs in an air oven at 80 °C for 168 h. The torque values obtained from both rheometers increased with increasing sulfur dosage, while the swelling index decreased. The significant increase in the degree of curing evidenced by the steady reduction in the swelling index provided excellent proof of the efficiency of the dynamic curing technique. Thermo‐oxidative ageing resulted in a pronounced enhancement in mechanical properties as a function of sulfur content. This observation seems to indicate that some microstructural changes, such as the formation of new crosslinks, occur in the thermo‐oxidatively aged TPEs. This trend was supported by further reduction in the swelling index of the aged TPEs. © 2003 Society of Chemical Industry     

Magnetically tunable oscillators and filters

Magnetically tunable filters and oscillators can be built throughout the 500-MHz-110-GHz range using a number of ferrite materials and varied geometries. The authors survey current trends and state-of-the-art results for oscillators and filters using YIG spheres _, YIG films, and hexagonal ferrites as the magnetically tunable elements     

Effects of compatibilizer and testing speed on the mechanical and morphology behaviors of co‐continuous amorphous copolyester‐polyoxymethylene blends

Co‐continuous amorphous copolyester (PETG)/polyoxymethylene (POM) (50/50 wt%/wt%) blends were prepared using a twin screw extruder followed compression molding. Two types of thermoplastic polyurethane (TPU) (i.e., polyester‐based and polyether‐based) were used to compatibilize the blends system. The thermal properties were characterized by using differential scanning calorimetry (DSC). The mechanical properties of the co‐continuous PETG/POM blends were studies through flexural and single‐edge notch tensile test (SEN‐T). The SEN‐T test was performed at three different testing speeds; 1, 100, and 500 mm/min. Scanning electron microscope (SEM) was used to access the fracture surface morphology. The flexural strength of the PETG/POM blends was decreased in the presence of TPU. This was attributed to the elastomeric nature of the TPU. The compatibilizing effects of TPU on the PETG/POM blends were proven by moderate improvement in the fracture toughness and confirmed by the SEM observation. The SEN‐T fractured surface of the compatibilized blends showed gross matrix shear yielding as compared to the uncompatibilized system. The K_c values of the PETG/POM blends decreased as the testing speed increased. The optimum toughening effect was observed in PETG/POM blends compatibilized with polyether‐based TPU at testing speed of 100 mm/min. The polyether‐based TPU is a more efficient compatibilizer, because the amount required is one‐half that of the polyester‐based counterpart to achieve the same K_c value. This was attributed to the elastomeric nature of the polyether‐based TPU. The softer nature of polyether‐based TPU could provide better toughening effect than the polyester‐based TPU, which is relatively harder in nature. POLYM. ENG. SCI., 45:710–719, 2005. © 2005 Society of Plastics Engineers     

Organomodification of montmorillonite and its effects on the properties of poly(butylene succinate) nanocomposites

The pristine sodium montmorillonite (MMT) was organically modified with hexadecyltrimethylammonium bromide (HTAB) at different contents. The organoclay was characterized by X‐ray diffraction (XRD), Fourier transform infrared spectroscopy, energy dispersive X‐ray techniques, and thermogravimetric analysis. Then, poly(butylene succinate) (PBS) nanocomposites were prepared by melt‐mixing process using maleic anhydride‐grafted PBS (PBS‐g‐MA) as compatibilizer. It was found that the mechanical properties of PBS nanocomposites filled with organoclay were apparently higher than that of the nanocomposite filled with MMT. This is attributed to the better filler–matrix interactions between PBS and the organoclay and the better filler dispersion. This is verifiable through the XRD, scanning electron microscopy, and transmission electron microscopy. The addition of PBS‐g‐MA further improved the mechanical properties. It was also found that our laboratory synthesized organoclay modified with HTAB has provided a better reinforcing efficiency when compared with the commercial octadecylamine‐modified organoclay. Besides that the thermal properties of PBS nanocomposites were studied through differential scanning calorimetry. POLYM. ENG. SCI., 2013. © 2013 Society of Plastics Engineers