A novel ±0.5 V,high current drive,and rail to rail current operational amplifier

A current operational amplifier (COA) with very high current drive capability is presented in this paper. The principle of operation of this unique structure is discussed, its most important formulas are derived and its outstanding performance is verified by HSPICE simulation in TSMC 0.18 μm CMOS, BSIM3, and Level49 technology. Owing to the elaborately arranged components, the proposed circuit demonstrates very high frequency bandwidth, extremely high CMRR, high output impedance, and true rail to rail output voltage swing range while operating at very low power supply of ±0.5 V. The interesting results such as current drive capability of ±1 mA, high output impedance of 5 GΩ, wide gain bandwidth of 220 MHz, extremely high output voltage swing of ±0.45 V, which interestingly provides the highest yet reported output voltage compliance for current mode building blocks implemented by regular CMOS technology, low static power consumption of 159 μW, and very high CMRR of 155 dB is achieved utilizing standard CMOS technology. Full process, voltage, and temperature variation analysis of the circuit is also investigated in order to approve the well robustness of the structure. The transient stepwise and sinusoidal response analysis is also done to verify the proposed COA stability.     

Implementation of OpenFlow based cognitive radio network architecture: SDN&R

Wireless Networks - The static conventional network architecture is ill-suited to the growing management complexity and highly dynamic wireless network topologies. Software Defined Radio systems...     

Best Minimum Summation Scheduler for Long Term Evolution

Resource scheduling in Long Term Evolution (LTE) is an open and rising issue. It has an enormous impact on the entire system performance. Due to the nature of LTE system, the scheduler has to be designed carefully. It has to overcome many challenges such as limited processing time and the high dynamic behavior. This paper proposes a novel scheduling policy for the MAC layer in LTE called the Best Minimum Summation (BMS). The main aim of this scheduling policy is to achieve high performance with low complexity. Three sub-schedulers have been developed. Each one of these schedulers deals with scheduling table in different dimension. The first one operates on the scheduling table through the user dimension (BMS.UE); while the second one operates on the scheduling table through the resource block dimension (BMS.RB). The third scheduler operates on the scheduling table correlating both of these dimensions (BMS.2D). All of the proposed solutions were intensively evaluated in a system level simulator. Three performance metrics were used which are throughput, error rate and fairness. The results have shown that the ability of the BMS.UE scheduler to outperform other existing schedulers of LTE.     

Hybrid opto-digital signal processing in 112 Gbit/s DP-16QAM and DP-QDB transmission for long-haul large-$$\hbox {A}_\mathrm{eff}$$ pure-silica-core fiber links

In this work, we investigate the energy efficiency in optical code division multiplexing access (OCDMA) networks with forward error correction (FEC). We have modeled the energy efficiency considering the capacity of information transmitted and the network power consumption. The proposed network power consumption model considers the optical transmitter, receiver, optical amplifiers, FEC and network infrastructure as encoders, decoders, star coupler and network control in the overall optical power network consumption balance. Furthermore, an expression relating the signal-to-noise-plus-interference ratio gain for forward error correction with low-density parity-check code scheme considering the power consumption and bandwidth occupancy has been derived. Numerical results for OCDMA networks with aggregated FEC procedure have revealed the viability of the FEC deployment aiming to increase the overall energy efficiency of OCDMA networks.     

64抽头LED线性亮度控制器用数字电位计控制LED亮度

采用LED但缺少微控制器或其它形式控制功能的应用可以得益于一种简单的电路,该电路能对LED的光强作手动控制.适合这种目的的器件有机械式(模拟)和电子式(数字)电位器.     

Fabrication of porous ZnO via electrochemical etching using 10 wt% potassium hydroxide solution

We described the fabrication of porous ZnO using the electrochemical etching method. ZnO thin films deposited by radiofrequency sputtering were etched electrochemically using 10 wt% KOH solution as an etching medium to obtain porous ZnO surface structure. A constant voltage of 15 V was applied to enhance the etching process. The etched samples were then characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), and photoluminescence (PL) spectroscopy to examine their structural and optical properties. XRD spectra showed that by performing the electrochemical etching process, porous ZnO could be obtained without severely deteriorating the crystallinity of the samples. Moreover, SEM characterization revealed that hillock-type porous ZnO was fabricated successfully. In addition, the cross-sectional SEM images revealed that there were only minimal changes in the layer thickness after the ZnO had been etched for various lengths of time. This finding shows the dominance of the vertical etching process. Notably, the intensity of PL spectra increased and the PL excitation peak exhibited a red shift trend as the etching time increased. These observations are due to the increase of the surface to volume ratio of the ZnO surface and the strain relaxation along the dislocation and grain boundary.     

New modified-majority voter-based efficient QCA digital logic design

ABSTRACT

Quantum-dot cellular automata (QCA) is an emerging nanotechnology and a possible alternative solution to the limitation of complementary metal oxide semiconductor (CMOS) technology. One of the most attractive fields in QCA is the implementation of configurable digital systems. This article presents a novel multifunctional gate called the modified-majority voter (MMV). The proposed gate works on the explicit interaction of the cell characteristic property for the implementation of digital circuits. This prominent feature of the proposed gate reduces the maximum hardware cost and implements highly efficient QCA structures. To verify the functionality of the proposed gate, some physical proofs, truth table and computational simulation results are performed. These results assured the validity of the existence of the proposed gate. It also dissipates less energy which has been calculated under three separate tunnelling energy levels using the QCAPro tool. To prove the effectiveness of the proposed MMV gate, several optimal irreversible arithmetic circuits such as three-input XOR, half-adder and full-adder are proposed. The modular layouts are verified with the freely available QCADesigner tool version 2.0.3.     

An efficient routing protocol for cognitive radio networks of energy-limited devices

Telecommunication Systems - In the era of Internet-of-things (IoT), the future 5G networks are supposed to provide ubiquitous connectivity, high speed, as well as low latency and energy efficiency...     

Analysis of Multi-Server Scheduling Paradigm for Service Guarantees during Network Mobility

Multi-server scheduling of traffic flows over heterogeneous wireless channels affix fresh concerns of inter-packet delay variations and associated problems of out-of-sequence reception, buffer management complexity, packet drops and re-ordering overhead. In this paper, we have presented an exclusive multi-server scheduling algorithm that is specifically tuned for mobile routers equipped with multiple wireless interfaces and has attained multiple care-of-address registrations with its home agent (HA). The proposed adaptive, Self-clocked, Multi-server (ASM) scheduling algorithm is based on predetermined transmission deadlines for each arrived packet at the mobile router. The mobile flows receive desired service levels in accordance with their negotiated service rates and are only constraint by the cumulative capacity of all active links. The major challenge lies in the handling of asymmetric channels to stitch into a unified virtual channel of higher capacity with reliable service guarantees during mobility. The sorted list of transmission schedules is used to assign physical channels in increasing order of their availability. This approach specifically encapsulates the physical layer disconnections during the handovers and ensures continuous service to ongoing flows. The proposed scheduling scheme is supplemented by an analytical model and simulations to verify its efficacy. The simulation results demonstrate higher degree of reliability and scalability of service provisioning to flows during mobility.