This paper presents the results of a study which has been carried out to investigate the crevice corrosion behavior of high-alloy stainless steel in a SWRO pilot plant. The study evaluated the corrosion performance of some austenitic and duplex steels in a crevice-forming environment created in a RO plant, especially in high-pressure feed and brine lines. The study of the effect of chemical dosing on crevice corrosion in the RO plant and electrochemical testing of crevice corrosion in the laboratory were the main objectives of this test program. High-alloy stainless steels, namely AL 6XN® and 254 SMO (superaustenitic), 2205, 2507 and DP3W (Duplex) were used in the test program. The tests were carried out in natural seawater and RO concentrate (conductivity: 75,000 to 80,000 μS/cm) at ambient temperature by operating the test plant at normal SWRO operating feed pressure of 54 bar. FeCl3 was added as coagulant to maintain a silt density index of ∼3, and H2SO4 was added to feed in order to maintain the feed pH of ∼ 6.5. Chlorination and subsequent dechlorination agents were not added to the feed. For crevice corrosion tests in RO unit, the exposure periods were 6 and 12 months, respectively. The results of the tests showed that alloy DP3W has the best pitting resistance in crevice forming environment of seawater. In RO concentrate, alloys 2507 and 254 SMO showed lowest “maximum pit depth”. The results of potentiodynamic cyclic polarization (PCP) indicate that all the alloys have high pitting potential and small hysteresis loop. The results of critical crevice solution pH (CCSpH) indicated excellent resistance of alloys 254 SMO and DP3W against crevice corrosion attack and 2205 had least resistance in most aggressive sodium chloride solution. 相似文献
Silicon - In this study, we report the synthesis of lead iodide PbI2 nanoparticles (NPs) by magnetic field-assisted pulsed laser ablation in ethanol. Results of X-ray diffraction (XRD) show that... 相似文献
In this study, mercury iodide (HgI2) nanoparticles (NPs) were synthesized by pulsed laser ablation in ethanol at laser fluences of 22.9, 33.1, and 43.3 J/cm2. The effect of laser fluence on the structural and optical properties of HgI2 NPs was studied. X-ray diffraction findings reveal that all synthesized HgI2 samples were polycrystalline in nature with orthorhombic structure. Absorption peak was appeared at 474 nm and the optical energy gap of HgI2 NPs decreases from 2.13 to 2.05 eV as laser fluence increased from 22.9 to 43.3 J/cm2. Zeta potential (ZP) results confirm that the nanoparticles synthesized at 22.9 and 33.1 J/cm2 have high degree of stability. Fluorescence measurements show the presence of several emission bands. Raman spectra of HgI2 NPs show the presence of six vibration modes centered at 15, 29, 37, 44, 51, and 70 cm?1. Fourier transform infrared (FT-IR) results show the presence of two bonds, namely, C–O and Hg-I. Transmission Electron Microscope (TEM) results showed that the formation of spherical nanoparticles for sample prepared at 22.9 J/cm2, 25–75 nm in size. While the nanoparticles synthesized with 33.1 and 43.3 J/cm2 exhibit nanorods and nanotubes morphologies, respectively. The dark I–V characteristics of β-HgI2 NPs/Si heterojunction photodetectors show rectification properties and the junction quality depends on the laser fluence and the best junction characteristics was obtained for heterojunction prepared at 33.1 J/cm2. The white light photosensitivity of the HgI2/p-Si photodetectors was measured at reverse bias under different intensities. The maximum responsivity reached was 3.39A/W at 450 nm for photodetector prepared at 33.1 J/cm2.
Recently, the application of metal oxides such as Fe3O4 nanoparticles have wide interest for environmental remediation and treatment of wastewater especially contaminated with azo dyes owing to its high degradation efficacy and low toxicity. The recovery of magnetic catalysts without losing their efficiency is an essential feature in the catalytic applications. The aim of this article is to investigate and synthesis of magnetically retrievable Fe3O4/polyvinylpyrrolidone/polystyrene (Fe3O4/PVP/PS) nanocomposite for the catalytic degradation of azo dye acid red 18 (AR18). Fe3O4/PVP/PS nanocomposite was prepared in two steps. Firstly, PVP/PS microsphere was synthesized by γ-irradiation polymerization of styrene in presence of PVP solution. Secondly, deposition of Fe3O4 nanoparticles on PVP/PS microsphere was achieved by the alkaline co-precipitation of Fe3+/Fe2+ ions. The chemical structural and morphological properties of PVP/PS microsphere and Fe3O4/PVP/PS nanocomposite were examined by XRD, TEM, DLS, FTIR, EDX and VSM techniques. TEM results showed homogeneous morphology, spherical shaped and well-dispersed Fe3O4 nanoparticles with average particle size of 26 nm around PVP/PS microspheres. The VSM measurements of Fe3O4/PVP/PS nanocomposite exhibit excellent magnetic response of saturation magnetization 26.38 emu/g which is suitable in magnetic separation. The effect of the synthesized Fe3O4/PVP/PS nanocomposite on the catalytic degradation of AR18 in presence of hydrogen peroxide (H2O2) as a heterogeneous Fenton-like catalyst was examined. The catalyst Fe3O4/PVP/PS/H2O2 played basic role in promoting the oxidation degradation efficiency of AR18 of initial concentration 50 mg/L to 94.4% in 45 min with excellent recyclability till the sixth cycles under the best conditions of pH 3, 2% v/v H2O2 and 0.3 g catalyst amount. Furthermore, the Fe3O4/PVP/PS/H2O2 hybrid catalyst system supports high capability for oxidation degradation of mixture of different dyes. The Fe3O4/PVP/PS nanocomposite catalyst had high magnetic and recyclability characters which are acceptable for the treatment of wastewater contaminated by various dyes pollutants.
This work deals with the synthesis of ZnFe2O4 NPs and studies the effect of addition on the physical properties PVDF/PVC blend. XRD affirmed the formation of ZnFe2O4 NPs and HRTEM shows that the size of the prepared ZnFe2O4 NPs ranged from 20 to 55 nm. The effect of ZnFe2O4 on the behavior of PVDF/PVC was studied through XRD, ATR-FTIR, FESEM and UV–Visible spectroscopy. XRD revealed that the addition of ZnFe2O4 NPs enhanced the crystallinity of PVDF/PVC blend system and also confirmed the incorporation of ZnFe2O4 NPs by appearing a diffraction peak at 2θ equals 35°. ATR-FTIR affirmed the interaction between blend sample and ZnFe2O4 NPs by appearing new bands 554 cm?1 and 421 cm?1 which are corresponded to ZnFe2O4 NPs functional group with appearing a new band at 603 cm?1. FESEM showed that the addition of ZnFe2O4 to PVDF/PVC blend improved surface properties, for example, roughness average has been increased from 319 to 414 nm while maximum height increased from 260 to 473 nm for PVDF/PVC and PVDF/PVC/10% ZnFe2O4, respectively. Optical properties and band gap calculations revealed that addition of ZnFe2O4 NPs changes the structure of polyblend samples which results due to the formation of localized states. The removal efficiency of Cd (II) by using PVDF/PVC/10% ZnFe2O4 reached about 50% at pH 6 after 60 min. the absorption mechanism as well as kinetics isotherm have been studied. It is found that adsorption of Cd (II) occurred through the Langmuir mechanism and fellow pseudo-second order isotherm.
Polyamide thin film composite membranes have dominated current reverse osmosis market on account of their excellent separation performances compared to the integrally skinned counterparts. Despite their very promising separation performance, chlorine-induced degradation resulted from the susceptibility of polyamide toward chlorine attack has been regarded as the Achilles’s heel of polyamide thin film composite. The free chlorine species present during chlorine treatment can impair membrane performance through chlorination and depolymerization of the polyamide selective layer. From material point of view, a chemically stable membrane is crucial for the sustainable application of membrane separation process as it warrants a longer membrane lifespan and reduces the cost involved in membrane replacement. Various strategies, particularly those involved membrane material optimization and surface modifications, have been established to address this issue. This review discusses membrane degradation by free chlorine attack and its correlation with the surface chemistry of polyamide. The advancement in the development of chlorine resistant polyamide thin film composite membranes is reviewed based on the state-of-the-art surface modifications and tailoring approaches which include the in situ and post-fabrication membrane modifications using a broad range of functional materials. The challenges and future directions in this field are also highlighted. 相似文献