Effective dimensionality of cuprate superconductors

A novel optical method for accurate monitoring of the carrier densityN in layered conductors is introduced. It is applied to several cuprate superconductors, and it is found thatT _c doesnot scale withN. However, if the closely spaced pairs or triplets of CuO₂ planes were coupled together to act as distinct metallic slabs, the relevant variable could ben, theslab carrier density. Indeed, we found thatT _c does scale nicely withn. This suggests that high-T _c superconductivity is effectively a two-dimensional phenomenon; it can occur in a cuprate slab which is only one unit cell thick. Finally, estimates are obtained for the length scales of localization of charge carriers:d 8 Å andd 2 Å in all the cuprates under study.     

Hematopoietic progenitor constituents and adherent cell progenitor morphology isolated from black-rumped agouti (Dasyprocta prymnolopha, Wagler 1831) bone marrow

Stem cells are present in the adult tissues of most diverse species. Bone marrow is recognized to be the most exploited site to obtain stem cells and cell progenitors. The objective of the present study was to characterize hematopoietic progenitor (HP) morphology and analyze the performance of adherent cell progenitors (ACPs) cultivated in vitro from black‐rumped agouti bone marrow (Dasyprocta prymnolopha). Bone marrow aspirates were obtained from tibia crest and used to prepare histological slides and identify cell morphology. Cells were also scattered on culture plates for later isolation, expansion, and quantification. Smears obtained from bone marrow demonstrated HPs at different stages of maturity. In culture, these cells showed fibroblastoid morphology and a strong tendency to form colonies, demonstrated by the presence of cell aggregates, cytoplasmic elongations lying side by side. An 80% cell confluence was observed at 18 days in culture and progressive reduction in the percentage of nonadherent mononuclear cells. After eight passes, a mean cell viability of 96.07% was observed, from a pool of 1.6 × 10⁷ cells (ACP). Thirteen 25‐cm² culture bottles were trypsinized, resuspended in freezing medium, stored in 14 criotubes at a concentration of 1 × 10⁶ cells per milliliter, and placed in liquid nitrogen at ?196°C. Agouti bone marrow demonstrated high plasticity, moreover different HP lines, and a population of adherent cells demonstrated morphology similar to mesenchymal stem cells in culture. Microsc. Res. Tech. 2012. © 2012 Wiley Periodicals, Inc.     

Information technology use and creativity: Findings from the Children and Technology Project

This research examined relationships between children’s information technology (IT) use and their creativity. Four types of information technology were considered: computer use, Internet use, videogame playing and cell phone use. A multidimensional measure of creativity was developed based on  and  test of creative thinking. Participants were 491 12-year olds; 53% were female, 34% were African American and 66% were Caucasian American. Results indicated that videogame playing predicted of all measures of creativity. Regardless of gender or race, greater videogame playing was associated with greater creativity. Type of videogame (e.g., violent, interpersonal) was unrelated to videogame effects on creativity. Gender but not race differences were obtained in the amount and type of videogame playing, but not in creativity. Implications of the findings for future research to test the causal relationship between videogame playing and creativity and to identify mediator and moderator variables are discussed.     

ILP turns 20

Inductive Logic Programming (ILP) is an area of Machine Learning which has now reached its twentieth year. Using the analogy of a human biography this paper recalls the development of the subject from its infancy through childhood and teenage years. We show how in each phase ILP has been characterised by an attempt to extend theory and implementations in tandem with the development of novel and challenging real-world applications. Lastly, by projection we suggest directions for research which will help the subject coming of age.     

The Kosko Subsethood Fuzzy Associative Memory (KS-FAM): Mathematical Background and Applications in Computer Vision

Many well-known fuzzy associative memory (FAM) models can be viewed as (fuzzy) morphological neural networks (MNNs) because they perform an operation of (fuzzy) mathematical morphology at every node, possibly followed by the application of an activation function. The vast majority of these FAMs represent distributive models given by single-layer matrix memories. Although the Kosko subsethood FAM (KS-FAM) can also be classified as a fuzzy morphological associative memory (FMAM), the KS-FAM constitutes a two-layer non-distributive model. In this paper, we prove several theorems concerning the conditions of perfect recall, the absolute storage capacity, and the output patterns produced by the KS-FAM. In addition, we propose a normalization strategy for the training and recall phases of the KS-FAM. We employ this strategy to compare the error correction capabilities of the KS-FAM and other fuzzy and gray-scale associative memories in terms of some experimental results concerning gray-scale image reconstruction. Finally, we apply the KS-FAM to the task of vision-based self-localization in robotics.     

Recursive identification of Hammerstein systems with application to electrically stimulated muscle

Modeling of electrically stimulated muscle is considered in this paper where a Hammerstein structure is selected to represent the isometric response. Motivated by the slowly time-varying properties of the muscle system, recursive identification of Hammerstein structures is investigated. A recursive algorithm is then developed to address limitations in the approaches currently available. The linear and nonlinear parameters are separated and estimated recursively in a parallel manner, with each updating algorithm using the most up-to-date estimation produced by the other algorithm at each time instant. Hence the procedure is termed the alternately recursive least square (ARLS) algorithm. When compared with the leading approach in this application area, ARLS exhibits superior performance in both numerical simulations and experimental tests with electrically stimulated muscle.     

Influence of oxygen content on some properties of Nb3Sn tape used for superconducting transmission lines

The influence of the presence of oxygen in the Nb-Zr substrate upon some physical and mechanical properties of the Nb-ZrO₂ substrate and/or Nb₃Sn tape superconductor prepared from such a substrate has been studied. The results have shown that the Nb₃Sn grains are much finer in the case of Nb-ZrO₂, than those obtained on Nb-Zr substrate. As a result, both the electrical and mechanical properties have been substantially improved. The critical current at a field of 5 T increased by between 100 and 200 %, the alternating current losses decreased by about one order of magnitude, the tensile strength increased by about a factor of three and the microhardness value also increased by about a factor of three for oxygen contents in the range 0.03 to 0.70 wt%. The specific resistance of this substrate increased at the same time from 17 to 22 cm and the relative elongation decreased from 5 to 3 %.     

Concurrent analogue fault simulation,the equation formulation aspect

Fault simulation is an essential tool for developing test patterns for circuits. Because the potential number of faults in a circuit is potentially very large, computational efficiency is an important consideration. In the digital domain, concurrent fault simulation is well‐established as an efficient tool. For analogue circuits, fault simulation is often performed by repeated insertion of possible faults and resimulation of the circuit. Consequently, methods for efficient concurrent analogue fault simulation are attracting attention. A review of existing methods of concurrent analogue fault simulation shows that most are based on a similar fundamental perturbation of the original fault‐free circuit equations, although the methods differ in the procedure applied after the circuit equations are formulated. We develop here a comprehensive set of element stamps, describing faulty elements, enabling effective and routine equation formulation for faulty circuits. These may be used no matter what method of fault simulation is later applied. These stamps are used in a new technique for concurrent analogue fault simulation, based on modified nodal analysis. A significant improvement in efficiency, compared with other methods, is demonstrated. Copyright © 2004 John Wiley & Sons, Ltd.     

A rough set approach to design concept analysis in a design chain

The inherent dynamic relationships among design tasks performed concurrently at different organizations characterize the complexities of a design chain where designers with diverse expertise need to collaborate across organizational boundaries. To ensure timely completion of inter-related design tasks, metrics to facilitate the early evaluation of design concepts are crucial. The ability to evaluate and select suitable design concepts at an early stage will ensure better solutions and greater savings in time and effort further downstream. This paper proposes a new approach based on the rough set theory to design concept analysis. The approach aims at early detection of design inadequacy. A so-called information system is constructed using the information gleaned from design concepts and design capabilities, and analyzed using the rough set theory to derive a set of design rules for design concept analysis. The approach embodies a technique for handling attributes with unavailable information, which is a frequent occurrence in design. This paper presents details of the proposed approach, the novel technique, and a case study.     

Development of a new hybrid plasma torch for materials processing

The main objectives of this study were to construct a plasma generator device and to investigate its applications in welding, cutting, and surface hardening. The device was derived from the union of two plasma-generating technologies, non-transferred-arc plasma and magnetoplasmadynamic thruster (MPDT), and characterised by the simultaneous formation of two plasma arcs in one device, generating a plasma jet with high energy density. Initially, trials were conducted to analyse the influence of the physical variables (gas flow rate and electric current intensities – primary and secondary) on the plasma jet, for which the thruster and the length of the plasma jet expulsed from the chamber were determined. The relevant parameters for welding, cutting and surface hardening were determined by trial and error, in which the trials were conducted using various plate thicknesses and materials. The results have shown that this device can be used for welding, cutting and surface hardening.