A smartphone-based system for detecting hand tremors in unconstrained environments

The detection of tremors can be crucial for the early diagnosis and proper treatment of some disorders such as Parkinson’s disease. A smartphone-based application has been developed for detecting hand tremors. This application runs in background and distinguishes hand tremors from common daily activities. This application can facilitate the continuous monitoring of patients or the early detection of this symptom. The evaluation analyzes 1770 accelerometer samples with cross-validation for assessing the ability of the system for processing unknown data, obtaining a sensitivity of 95.8 % and a specificity of 99.5 %. It also analyzes continuous data for some volunteers for several days, which corroborated its high performance.     

Software for simulating dichromatic perception of video streams

We have designed a configurable stand‐alone Matlab‐based software to simulate dichromatic perception of video streams. The algorithm used is an extension for video streams of the “corresponding pair algorithm” by Capilla and coworkers for simulation of dichromatic perception of images. The software allows the user to upload a video sequence and to process it using different dichromatic color vision models and viewing conditions. The output video may be generated in different spatial and temporal resolutions and file formats. The functions for Matlab environment and a stand‐alone application may be downloaded from the Repository of the University of Alicante. © 2013 Wiley Periodicals, Inc. Col Res Appl, 39, 486–491, 2014     

Solid lubricant behavior of MoS2 and WSe2-based nanocomposite coatings

Abstract

Tribological coatings made of MoS₂ and WSe₂ phases and their corresponding combinations with tungsten carbide (WC) were prepared by non-reactive magnetron sputtering of individual targets of similar composition. A comparative tribological analysis of these multiphase coatings was done in both ambient air (30–40% relative humidity, RH) and dry nitrogen (RH<7%) environments using the same tribometer and testing conditions. A nanostructural study using advanced transmission electron microscopy of the initial coatings and examination of the counterfaces after the friction test using different analytical tools helped to elucidate what governs the tribological behavior for each type of environment. This allowed conclusions to be made about the influence of the coating microstructure and composition on the tribological response. The best performance obtained with a WSe_x film (specific wear rate of 2 × 10^?8 mm³ N^–1m^–1 and a friction coefficient of 0.03–0.05) was compared with that of the well-established MoS₂ lubricant material.     

Effect of Combined Natural Antimicrobials on Spoilage Microorganisms and Listeria Innocua in a Whey Cheese “Ricotta”

The effect of nisin alone and in combination with Microgard? on the natural microbial flora of ricotta cheese and in post-process contamination with Listeria innocua was studied. Microbial groups studied were mesophilic, psychrotrophic, proteolytic, lactic acid and coliform bacteria, and total molds and yeasts. Considering the evolution of all microbial groups and failure criteria adopted for mesophilic and coliform bacteria, this product reached the end of its shelf life before 5 days, which is insufficient time for product commercialization. The combined use of nisin and Microgard? proved to be more effective than the individual application on these microbial groups, resulting in a 13 days shelf life extension. Additionally, the combined treatment reduced the growth of L. innocua as a post-process contamination.     

A bill of materials-based approach for end-of-life decision making in design for the environment

Re-use, recycling or remanufacturing of products and components are good alternatives for reducing the environmental problems resulting from the huge amounts of waste currently arriving at landfills. A new approach is proposed in this paper for enhancing these alternatives from the earliest stages of product design. Given the product structure (obtained from its bill of materials (BOM)) and the joining and geometrical relationships among the components (obtained from the three-dimensional, computer-aided design representation), a model is proposed that will determine the EOL (EOL) strategy, i.e. the depth of disassembly inside the structure and the final end (re-use, recycle, remanufacture or disposal) for each disassembled part leading to the highest profit. A scatter search (SS) metaheuristic is used to determine the disassembly cost at each level of the BOM. The model presents a number of major improvements with respect to previous research. It addresses the problems of simultaneously determining both the best EOL strategy and the disassembly sequence, as well as allowing removal of components not only over the two or three Cartesian axes and affording the possibility of modifying the encountered strategy in a further step so as to fulfil other business criteria (such as disassembly time, resources availability or maximum waste generation rate).     

Evaluation of decay photocurrent measurements in dye‐sensitized solar cells: Application to laser beam‐induced current technique

The use of the laser beam‐induced current (LBIC) technique in photovoltaic devices is widespread, but its use in photoelectrochemical cells, such as dye‐sensitized solar cells (DSSCs), is limited due to the configuration of these devices. The main reason is the very slow response time of DSSCs in the decay process, and therefore LBIC scans take too long to perform. We have designed a procedure published in the literature to correct the photocurrent values obtained by the LBIC technique, based on an algorithm that uses a decreasing mono‐exponential model. This work presents a study of the decay measurements in DSSCs using several functions, in order to improve the algorithm designed. It concludes that functions such as a decreasing bi‐exponential or Becquerel function generate better fits to experimental data. Copyright © 2010 John Wiley & Sons, Ltd.     

Application of digital image correlation at the microscale in fiber-reinforced composites

Digital image correlation (DIC) is applied to analyzing the deformation mechanisms under transverse compression in a fiber-reinforced composite. To this end, compression tests in a direction perpendicular to the fibers were carried out inside a scanning electron microscope and secondary electron images obtained at different magnifications during the test. Optimum DIC parameters to resolve the displacement and strain field were computed from numerical simulations of a model composite and they were applied to micrographs obtained at different magnifications (250×, 2000×, and 6000×). It is shown that DIC of low-magnification micrographs was able to capture the long range fluctuations in strain due to the presence of matrix-rich and fiber-rich zones, responsible for the onset of damage. At higher magnification, the strain fields obtained with DIC qualitatively reproduce the non-homogeneous deformation pattern due to the presence of stiff fibers dispersed in a compliant matrix and provide accurate results of the average composite strain. However, comparison with finite element simulations revealed that DIC was not able to accurately capture the average strain in each phase.     

Selective extraction,structural characterisation and antifungal activity assessment of napins from an industrial rapeseed meal

This article reports an extraction–purification of napins from an industrial rapeseed meal and the assessment of their antimicrobial activity against Fusarium langsethiae. The best extraction conditions are observed at pH 2, 12% (w/w) of rapeseed meal after 15 min of extraction in water at room temperature. Under these conditions the extraction is highly selective, allowing a simple purification process (ammonium sulfate precipitation followed by desalting size exclusion chromatography) to get purified napins. These napins possessed significant anti-Fusarium activity (IC₅₀ = 70 μM) and a compact secondary structure rich in α-helix, which may explain this bioactivity.     

An optimization algorithm inspired by the States of Matter that improves the balance between exploration and exploitation

The ability of an Evolutionary Algorithm (EA) to find a global optimal solution depends on its capacity to find a good rate between exploitation of found-so-far elements and exploration of the search space. Inspired by natural phenomena, researchers have developed many successful evolutionary algorithms which, at original versions, define operators that mimic the way nature solves complex problems, with no actual consideration of the exploration-exploitation balance. In this paper, a novel nature-inspired algorithm called the States of Matter Search (SMS) is introduced. The SMS algorithm is based on the simulation of the states of matter phenomenon. In SMS, individuals emulate molecules which interact to each other by using evolutionary operations which are based on the physical principles of the thermal-energy motion mechanism. The algorithm is devised by considering each state of matter at one different exploration–exploitation ratio. The evolutionary process is divided into three phases which emulate the three states of matter: gas, liquid and solid. In each state, molecules (individuals) exhibit different movement capacities. Beginning from the gas state (pure exploration), the algorithm modifies the intensities of exploration and exploitation until the solid state (pure exploitation) is reached. As a result, the approach can substantially improve the balance between exploration–exploitation, yet preserving the good search capabilities of an evolutionary approach. To illustrate the proficiency and robustness of the proposed algorithm, it is compared to other well-known evolutionary methods including novel variants that incorporate diversity preservation schemes. The comparison examines several standard benchmark functions which are commonly considered within the EA field. Experimental results show that the proposed method achieves a good performance in comparison to its counterparts as a consequence of its better exploration–exploitation balance.