Treatment of Humic Waters By Ozone

Two different generators for ozone were tested, a traditional electrical discharge generator and a generator based upon UV–irradiation of air at 150–180 nm. It was demonstrated that the traditional generator gave slightly higher reductions in levels of color for equivalent ozone dosages. Both gases affected the molecular weight distribution in the way that the bigger molecules were broken down to smaller ones. No significant difference between the molecular weight reduction efficiency of the gases was found.     

The effect of backbone fluorination on the carrier mobility in alkoxy and alkyl substituted conducting polymers of the poly(phenylenevinylene) type

Summary We report the synthesis of some new backbone fluorinated polymers of the poly(phenylenevinylene) type. The new polymers were characterised by NMR, SEC and X-ray powder diffraction. The charge carrier mobilities were determined using pulse radiolysis time resolved microwave conductivity (PR-TRMC) and the carrier mobilities were compared to the similar non-fluorinated analogues. The changes in charge carrier mobilities as a function of molecular substitution pattern is discussed in terms of other materials properties such as electronic structure and absorption properties. The major result is that it was found possible for this type of material to alter the electronic energy levels by molecular substitution without imparting significant changes in the magnitude of the charge carrier mobilities and the optical properties.     

Perceptual evaluation of color gamut mapping algorithms

The recommendation of the CIE has been followed as closely as possible to evaluate the accuracy of five color gamut mapping algorithms (GMAs)—two nonspatial and three spatial algorithms—by psychophysical experiments with 20 test images, 20 observers, one test done on paper and a second one on display. Even though the results do not show any overall “winner,” one GMA is definitely perceived as not accurate. The importance of a high number of test images to obtain robust evaluation is underlined by the high variability of the results depending on the test images. Significant correlations between the percentage of out‐of‐gamut pixels, the number of distinguishable pairs of GMAs, and the perceived difficulty to distinguish them have been found. The type of observers is also important. The experts, who prefer a spatial GMA, show a stronger consensus and look especially for a good rendering of details, whereas the nonexperts hardly make a difference between the GMAs. © 2008 Wiley Periodicals, Inc. Col Res Appl, 33, 470–476, 2008     

Societal Safety: Concept,Borders and Dilemmas

In most industrialized countries, the end of the Cold War marked a change in focus from preparedness for war to an increasing focus on civil society's own vulnerability and safety. To meet new threats and changing risks, there is also a need for new analytical concepts. Societal safety is a concept developed in Norway during the last decade. It could be defined as: ‘The society's ability to maintain critical social functions, to protect the life and health of the citizens and to meet the citizens' basic requirements in a variety of stress situations’. It aims to be a systematic approach for understanding, mitigating and responding to social problems such as extraordinary stresses and losses, interferences in complex and mutual dependent systems, or lack of trust in vital social institutions. Future threats to society are not limited to specific sectors or areas, but stem from complex interactions amongst economic, technological, social and cultural factors. Thus, the main challenges to improve societal safety will be the ability to coordinate, organize and assign clear roles to different actors at the international, national and local levels. Societal safety has interfaces with other safety‐related areas such as national security, sustainable development, human security and incident management (handling of isolated accidents, common illness and ordinary criminal acts). Societal safety is, however, a sensitive political issue containing dilemmas and value choices that are hardly possible to perceive or solve as pure scientific problems.     

Effect of grain refinement on the fluidity of two commercial Al-Si foundry alloys

The effect of grain refinement on the fluidity of AlSi7Mg and AlSi11Mg has been investigated by spiral tests. Two different types of grain refiners have been evaluated. An AlTi5Bl master alloy was added to different Ti contents. Since the commercial alloys had a high initial content of titanium, model alloys were made to investigate the fluidity at low grain refiner additions. Commercial alloys grain refined only by boron additions have also been investigated. The results from the fluidity measurements have been verified by measuring the dendrite coherency point of the different cast alloys. Although different, the two methods show similar trends. The spirals from each fraction grain refiner cast were subsequently investigated metallographically at the tip of the spirals and at a reference point a distance behind, but no obvious difference in structure was observed. For both alloys, an increase in fluidity is observed as the content of grain refiner increases above 0.12 pct Ti, while the fluidity is impaired with increased grain refinement below 0.12 pct Ti. The alloys grain refined with ~0.015 pct B show the highest fraction solid at dendrite coherency, the smallest grain size, and the best fluidity.     

The Danish Twin Apartment Study – Part II: Mathematical modeling of the relative strength of sources of indoor air pollution

Abstract This study deals with the modeling of air pollution in apartments from laboratory measurements of source strengths, using formaldehyde and Total Volatile Organic Compounds (TVOCs) as model pollutants. The sources in two test apartments were grouped into two: building-related sources and occupant-related sources. The measured source strengths and ventilation rates were used for the prediction of concentrations expected in the apartments. These predictions were compared to measurements in the apartment over 12 months. The conclusions were that the model predictions based on emission rates measured in the laboratory can be used to predict the long-term concentration of the two model pollutants in the apartments. Considering the measured differences in ventilation between the apartments, an occupant emission rate of between 0.2 and 0.3 mg/h/kg body weight could be estimated. Based on previous suggested limits of acceptable exposures of humans to VOCs, an acceptable average emission rate of VOCs from building materials in general was estimated to be about 30 (μ/m²/h. The modeling showed that during the first 200 days, building materials dominated the emissions. After this, sources relating to the occupants dominated. On average about half of the VOC pollution originated from the building materials.     

Simulating Ramsey-Type Fringes in a Pulsed Microwave-Driven Classical Josephson Junction

We present evidence for a close analogy between the nonlinear behaviour of a pulsed microwave-driven Josephson junction at low temperature and the experimentally observed behaviour of Josephson systems operated below the quantum transition temperature under similar conditions. We specifically address observations of Ramsey-type fringe oscillations, which can be understood in classical nonlinear dynamics as results of slow transient oscillations in a pulsed microwave environment. Simulations are conducted to mimic experimental measurements by recording the statistics of microwave-induced escape events from the anharmonic potential well of a zero-voltage state. Observations consistent with experimentally obtained Ramsey-type oscillations are found in the classical model. An erratum to this article can be found at     

An Operator-integration-factor splitting method for time-dependent problems: Application to incompressible fluid flow

In this paper we present a simple, general methodology for the generation of high-order operator decomposition (splitting) techniques for the solution of time-dependent problems arising in ordinary and partial differential equations. The new approach exploits operator integration factors to reduce multiple-operator equations to an associated series of single-operator initial-value subproblems. Two illustrations of the procedure are presented: the first, a second-order method in time applied to velocity-pressure decoupling in the incompressible Stokes problem; the second, a third-order method in time applied to convection-Stokes decoupling in the incompressible Navier-Stokes equations. Critical open questions are briefly described.     

Glycogen content, buffering capacity and resting pH in live muscles of pigs of different halothane genotypes (a pilot project)

The development of PSE (pale, soft and exudative) meat is characterized by a rapid decrease in pH post-mortem and/or a low ultimate pH. We investigated some physiological properties of the live muscle (the glycogen content, the non-bicarbonate buffering capacity and 'resting pH'), which could influence both the decrease in pH and the ultimate pH. Measurements were performed on three halothane genotypes, hal(N)hal(N), hal(N)hal(n) and hal(n)hal(n), with their known predispositions for PSE meat. It was demonstrated that the glycogen content in both the groups of double recessive and heterozygous individuals was higher than the levels in the group of homozygous dominant pigs. No difference was found in non-bicarbonate buffering capacity between the groups. The groups with the highest glycogen levels also had the lowest 'resting pH' values. The results indicate that measurement of glycogen content in vivo may be superior to the halothane test in detecting PSE-prone individuals. The lower pH values of carriers of the hal(n) gene further indicate that the characteristic rapid decrease after slaughter may not be as fast as generally accepted, as even very low pH values can be observed in the muscles of live pigs.     

The structure of a cast dental Ni-Cr-Be alloy

The structure of a typical dental Ni-Cr-Be alloy with 1.8 wt% Be has been investigated by SEM and TEM as well as by quantitative X-ray microanalyses in both instruments. Due to its low atomic weight the atomic fraction of Be is as high as 0.10. During solidification beryllium segregates substantially, and a large volume fraction of the casting is made up of a eutectic with coarse ( 1 µm diameter) alternating rods of fcc Ni-Cr and NiBe with a CsCl-type structure (ordered bcc). Smaller ( 0.1 µm diameter) rods of NiBe are precipitated in matrix in the solid state. Microanalyses of the NiBe rods show that they have a low chromium content ( 1.5 wt%). The cube boundary planes of the ordered b cc and fcc structures have a slight difference in orientation of about 7° which is most probably due to a small coherency misfit of the two types of lattices. The 100 directions in cube boundary plane of the fcc structure are nearly parallel to the 110 directions of the ordered bcc cube boundary plane. Sometimes another and more complex relationship between the two lattices occurs. The alloy contains 3.9 wt% Al which gives rise to numerous small ( 10 nm), spherical, ordered particles of Ni₃Al both in matrix as well as in the fcc eutectic rods.