NOTCHED FATIGUE BEHAVIOUR OF TWO COLD ROLLED STEELS

Abstract— A SAE1010 plain carbon steel and a SAE945X HSLA steel were cold rolled to various thickness reductions. Centre notched specimens were tested under stress control at a stress ratio of—1. The effect of loading direction on the fatigue strength was examined. The notched specimen fatigue strength was only slightly increased by cold rolling, since two opposing factors: the smooth specimen fatigue strength and the notch sensitivity, were increased by cold rolling. The notched specimen fatigue strength in the transverse direction was approximately the same as that in the longitudinal direction. An empirical equation and equations derived from fracture mechanics and Neuber's rule were applied to predict the fatigue notch factor for the sharp and blunt notch geometries examined. A reasonable agreement between the predictions and the experimental results was observed for the sharp notches. For the blunt notches, the predicted fatigue notch factors were conservative.     

Modeling of multilevel converters

In this paper, the imbricated cells multilevel converters are studied and modeled from a control viewpoint. These converters make use of several switches connected in a series, which allows using switches with reduced voltage ratings; these low voltage switches have lower conduction losses and can switch at higher frequency. In addition to this feature common to all converters using series connected switches, the control signals of multilevel converters can be phase shifted to increase the apparent switching frequency and improve the dynamic performances of the whole converter. It is shown that a multilevel inverter leg, composed of p pairs of switches and p-1 capacitors, forms a multivariable nonlinear system that cannot be properly modeled by standard methods such as state-space averaging. The transient behavior of this system depends on the current harmonics and their phase shift with the different control signals. A specific model is detailed, studied, and used to illustrate the properties of these converters. In particular, the natural balancing of the voltage across the switches is demonstrated and the time constants involved in this process are determined     

Cardiac papillary fibroelastoma excision combined with reconstructive surgery

1. The effect of the aqueous extract of Cissus sicyoides (CS) on isolated guinea pig aortic rings was studied. CS contracts the smooth muscle of the aorta in a dose-response relation. 2. The extract of CS increases the norepinephrine contraction in normal calcium and in solutions without calcium. 3. Lanthanum inhibits the contraction induced by CS. 4. The vasoconstrictor effect of CS was increased in solutions without calcium or with low calcium, which is an inverse calcium-dependent contraction. 5. Prolonged exposure to calcium-free solution did not abolish CS contraction. These contractions can be elicited repeatedly even after 6 hr of continuous exposure to calcium-free solutions. 6. Caffeine reduces contractile response induced by CS in normal calcium, as well as in solutions without calcium. 7. Our results support the idea that the aqueous extract of CS acts at the membrane level, increasing the calcium entry through the membrane as well as acting on the internal calcium deposits, possibly on the sarcoplasmic reticulum.     

Development of maraging steel compositions intended for quenching from the liquid state

A. A. Baikov Institute of Metallurgy, Moscow. Ulyanovsk Polytechnic Institute. Translated from Metallovedenie i Termicheskaya Obrabotka Metallov, No. 4, pp. 22–25, April, 1992.     

Anthropometric data for describing the kinematics of the human hand.

The major goal of this investigation was to collect statistically-based anthropometry describing the kinematics of the human hand and to model this anthropometry as a function of external hand measurements, so that it may be predicted noninvasively. Joint centres were anatomically estimated as the centre of curvature of the head of the bone proximal to the given joint. Joint centres determined using Reuleaux's method for PIP and DIP were within 1.4 mm of this anatomical estimate. Models using bone length as the independent variable explain more than 97% of the variability in the anatomically estimated joint centre position along the mid-line of the bone. Models for estimating the lengths of the kinematic segments using external hand length as the independent variable account for between 49 and 99% of the variability in segment length. Models for estimating the axial location of the finger MCP and thumb CMC joints with respect to the distal wrist crease using external hand length as the independent variable account for between 82 and 96% of the variability in these locations. Models for estimating the radio-ulnar location of the finger MCP and thumb CMC joints with respect to the long axis of the third metacarpal using external hand breadth as the independent variable account for between 30 and 74% of the variability in these locations.     

Osteoclastic features of multinucleated giant cells responding to synthetic hydroxyapatite implanted in rat jaw bone.

Multinucleated giant cells (MGCs) that responded to synthetic hydroxyapatite (HAP) implanted in rat mandibles were studied with electron microscopy. HAP used in this study sintered at 200 degrees C (HAP200) and at 125 degrees C (HAP1250) after the synthesis by a wet method. One to three weeks after the intraosseous implantation of HAP, MGCs responding to HAP200 had not only well-developed ruffled border and the clear zone but well-developed perinuclear Golgi complex, many mitochondria and vesicles in their cytoplasms. MGCs responding to HAP1250 had the clear zone, but not the ruffled border although they showed similar cytoplasmic features to those of MGCs responding to HAP200. They merely extended short slender cytoplasmic processes to HAP1250. These results suggest that although osteoclast-like MGCs respond to HAP implanted in the bone, the development of the ruffled border-clear zone system depends on physicochemical properties of HAP.     

A case of aneurysm of the descending thoracic aorta associated with Beh?et's disease]

A 66-year-old male with Beh?et's disease admitted again with hemoptysis. He underwent the resection and direct closure of descending aortic aneurysm 3 years ago, followed without the use of steroid. Chest CT scanning demonstrated a recurrent aneurysm of the descending aorta which was could not be detected on the previous CT only 23 days before. In the current operation, we performed resection, direct closure and wrapping of the aneurysm. The pathological examination showed a true aneurysm of Beh?et's disease. The patient is free from recurrence for 17 months since the operation under steroid therapy.     

Sexual dysfunction

According to the definition of the ICD-10 or DSM-III, sexual dysfunction is not caused by organic disorder or disease, and psychogenic. But, the patient who is suffered from sexual dysfunction caused by organic disorder or disease, has many psycho-social problems. So, in this article, all types of sexual dysfunction are subjected. Especially sexual hypofunction is mentioned. And the new type of sexual dysfunctions such as computer sex are also explained. Sex therapy of the Masters and Johnson method and the new sex therapy of Kaplan, H. are explained.