Dynamics of Fusarium Mycotoxins and Lytic Enzymes during Pea Plants’ Infection

Fusarium species are common plant pathogens that cause several important diseases. They produce a wide range of secondary metabolites, among which mycotoxins and extracellular cell wall-degrading enzymes (CWDEs) contribute to weakening and invading the host plant successfully. Two species of Fusarium isolated from peas were monitored for their expression profile of three cell wall-degrading enzyme coding genes upon culturing with extracts from resistant (Sokolik) and susceptible (Santana) pea cultivars. The extracts from Santana induced a sudden increase in the gene expression, whereas Sokolik elicited a reduced expression. The coherent observation was that the biochemical profile of the host plant plays a major role in regulating the fungal gene expression. In order to uncover the fungal characteristics in planta, both pea cultivars were infected with two strains each of F. proliferatum and F. oxysporum on the 30th day of growth. The enzyme activity assays from both roots and rhizosphere indicated that more enzymes were used for degrading the cell wall of the resistant host compared to the susceptible host. The most commonly produced enzymes were cellulase, β-glucosidase, xylanase, pectinase and lipase, where the pathogen selectively degraded the components of both the primary and secondary cell walls. The levels of beauvericin accumulated in the infected roots of both cultivars were also monitored. There was a difference between the levels of beauvericin accumulated in both the cultivars, where the susceptible cultivar had more beauvericin than the resistant one, showing that the plants susceptible to the pathogen were also susceptible to the toxin accumulation.     

Growth of Single‐Walled Carbon Nanotubes from Sharp Metal Tips

The nucleation and growth of single‐walled carbon nanotubes is observed in situ in a transmission electron microscope. Carbon atoms are implanted into catalytically active metal particles by electron‐beam sputtering. The metal particles are then shaped with a focused electron beam. Once the particles have a region of high surface curvature, spontaneous nucleation and growth of single‐walled carbon nanotubes occurs on the metal particles. It is shown that the local solubility of carbon in the metal determines the nucleation of nanotubes. This is confirmed by atomistic computer simulations treating the solubility of carbon in a metal particle as a function of the size of the system.     

Large‐area epitaxial silicon solar cells based on industrial screen‐printing processes

Thin‐film epitaxial silicon solar cells are an attractive future alternative for bulk silicon solar cells incorporating many of the process advantages of the latter, but on a potentially cheap substrate. Several challenges have to be tackled before this potential can be successfully exploited on a large scale. This paper describes the points of interest and how IMEC aims to solve them. It presents a new step forward towards our final objective: the development of an industrial cell process based on screen‐printing for > 15% efficient epitaxial silicon solar cells on a low‐cost substrate. Included in the discussion are the substrates onto which the epitaxial deposition is done and how work is progressing in several research institutes and universities on the topic of a high‐throughput epitaxial reactor. The industrial screen‐printing process sequence developed at IMEC for these epitaxial silicon solar cells is presented, with emphasis on plasma texturing and improvement of the quality of the epitaxial layer. Efficiencies between 12 and 13% are presented for large‐area (98 cm²) epitaxial layers on highly doped UMG‐Si, off‐spec and reclaim material. Finally, the need for an internal reflection scheme is explained. A realistically achievable internal reflection at the epi/substrate interface of 70% will result in a calculated increase of 3 mA/cm² in short‐circuit current. An interfacial stack of porous silicon layers (Bragg reflectors) is chosen as a promising candidate and the challenges facing its incorporation between the epitaxial layer and the substrate are presented. Experimental work on this topic is reported and concentrates on the extraction of the internal reflection at the epi/substrate interface from reflectance measurements. Initial results show an internal reflectance between 30 and 60% with a four‐layer porous silicon stack. Resistance measurements for majority carrier flow through these porous silicon stacks are also included and show that no resistance increase is measurable for stacks up to four layers. Copyright © 2005 John Wiley & Sons, Ltd.     

Influence of copigment derived from Tasmannia pepper leaf on Davidson's plum anthocyanins

Davidson's plum (Davidsonia pruriens, F. Muell.), a native to Australian rainforests, large, crimson-red fruit, which superficially resembles plum, has been commercially cultivated in Australia since 1990s. The current production volume exceeds market demands therefore this study was designed to evaluate the suitability of Davidson's plum extract as a source of anthocyanin-based food colorant. The stability of the Davidson's plum extract towards heat treatment at 95 °C was higher than that of commercial mulberry colorant, but inferior to colorants derived from red cabbage and purple sweetpotato. An addition of a variety of phenolic acids significantly increased color intensity indicating the formation of copigmentation complexes. Commercial chlorogenic acid as well as extract from a native Australian herb rich in chlorogenic acid, Tasmannia pepper leaf (Tasmannia lanceolata, R. Br.), were both tested in model soft drink solutions subjected to light irradiation and heat treatment. In both cases, the addition of the copigment resulted in a lasting increase in color intensity. In conclusion, Davidson's plum extract can successfully be utilized as a source of natural food color. Extract from Tasmania pepper leaf can be used as a co-pigment for Davidson's plum anthocyanins. PRACTICAL APPLICATION: The color properties of an anthocyanin colorant derived from the native Australian fruit Davidson's plum are comparable to those of mulberry, which is currently applied as a food colorant in Australian food products. Utilization of Davidson's plum fruit as a source of natural color will allow the industry to increase the range of natural pigments and will create new opportunities for the emerging native food industry.     

Albumin Binds Doxorubicin via Self–Assembling Dyes as Specific Polymolecular Ligands

Congo red (CR) type self–assembled ribbon–like structures (SRLS) were previously shown to interact with some proteins, including albumin. SRLS also complex with some drugs with a flat, ring–shaped structure with aromatic characteristics, intercalating them into their ribbon structure. The combination of interaction with proteins and drug binding by SRLS enables the use of such systems for immunotargeting. It is especially interesting in the case of chemotherapeutic agents. The present experiments aimed to show that the model carrier system composed of supramolecular albumin and Congo red efficiently binds doxorubicin (Dox) and that the drug can be released at reduced pH. The presented results come from the studies on such complexes differing in the molar ratio of CR to Dox. The following methods were used for the analysis: electrophoresis, dialysis, gel filtration, spectral analysis, and analysis of the size of the hydrodynamic radius using the dynamic light scattering method (DLS). The applied methods confirmed the formation of the CR–Dox complex, with large dimensions and changed properties compared with free CR. The presented results show that albumin binds both CR and its complex with Dox. Various CR–Dox molar ratios, 5:1, 2:1, and 1:1, were analyzed. The confirmation of the possibility of releasing the drug from the carriers thus formed was also obtained. The presented research is important due to the search for optimal solutions for the use of SRLS in drug immunotargeting, with particular emphasis on chemotherapeutic agents.     

Tumor Infiltration with CD20+CD73+ B Cells Correlates with Better Outcome in Colorectal Cancer

Immunotherapy has become increasingly important in the treatment of colorectal cancer (CRC). Currently, CD73, also known as ecto-5′-nucleotidase (NT5E), has gained considerable interest as a potential therapeutic target. CD73 is one of the key enzymes catalyzing the conversion of extracellular ATP into adenosine, which in turn exerts potent immune suppressive effects. However, the role of CD73 expression on various cell types within the CRC tumor microenvironment remains unresolved. The expression of CD73 on various cell types has been described recently, but the role of CD73 on B-cells in CRC remains unclear. Therefore, we analyzed CD73 on B-cells, especially on tumor-infiltrating B-cells, in paired tumor and adjacent normal tissue samples from 62 eligible CRC patients. The highest expression of CD73 on tumor-infiltrating B-cells was identified on class-switched memory B-cells, followed by naive B-cells, whereas no CD73 expression was observed on plasmablasts. Clinicopathological correlation analysis revealed that higher CD73⁺ B-cells infiltration in the CRC tumors was associated with better overall survival. Moreover, metastasized patients showed a significantly decreased number of tumor-infiltrating CD73⁺ B-cells. Finally, neoadjuvant therapy correlated with reduced CD73⁺ B-cell numbers and CD73 expression on B-cells in the CRC tumors. As promising new immune therapies are being developed, the role of CD73⁺ B-cells and their subsets in the development of colorectal cancer should be further explored to find new therapeutic options.     

DNA Demethylation in Response to Heat Stress in Arabidopsis thaliana

Environmental stress is one of the most important factors affecting plant growth and development. Recent studies have shown that epigenetic mechanisms, such as DNA methylation, play a key role in adapting plants to stress conditions. Here, we analyzed the dynamics of changes in the level of DNA methylation in Arabidopsis thaliana (L.) Heynh. (Brassicaceae) under the influence of heat stress. For this purpose, whole-genome sequencing of sodium bisulfite-treated DNA was performed. The analysis was performed at seven time points, taking into account the control conditions, heat stress, and recovery to control conditions after the stress treatment was discontinued. In our study we observed decrease in the level of DNA methylation under the influence of heat stress, especially after returning to control conditions. Analysis of the gene ontology enrichment and regulatory pathways showed that genes characterized by differential DNA methylation are mainly associated with stress response, including heat stress. These are the genes encoding heat shock proteins and genes associated with translation regulation. A decrease in the level of DNA methylation in such specific sites suggests that under the influence of heat stress we observe active demethylation phenomenon rather than passive demethylation, which is not locus specific.     

Changes in the Physicochemical Properties of Blood and Skin Cell Membranes as a Result of Psoriasis Vulgaris and Psoriatic Arthritis Development

Psoriasis is accompanied by disturbed redox homeostasis, with systemic and local oxidative stress promoting the modification of basic components of cellular membranes. Therefore, the aim of the study was to investigate the effect of development of psoriasis vulgaris and psoriatic arthritis on the composition and physicochemical properties of skin cell membranes (keratinocytes and fibroblasts) and blood cells (lymphocytes, granulocytes and erythrocytes). Both forms of psoriasis are characterized by decreased levels and changes in the localization of membrane phospholipids, and an increased level of sialic acid as well as the lipid peroxidation product (malondialdehyde), which resulted in an increase in the zeta potential of skin cells and blood cells, with granulocytes and lymphocytes affected more than erythrocytes. Using theoretical equations and the dependence of the cell membrane surface charge density as a function of pH, it was shown that patients with psoriatic arthritis have a greater increase in the concentration of negatively charged groups on the membrane surface and reduced the value of the association constant with H⁺ compared to patients with psoriasis vulgaris. Therefore, it can be suggested that the physicochemical parameters of membranes, skin and blood cells, especially lymphocytes, can be used to assess the severity of the disease.     

Silicon-Boron Alloys as New Ultra-High Temperature Phase-Change Materials: Solid/Liquid State Interaction with the h-BN Composite

Silicon-boron alloys have been recently pointed out as novel ultra-high temperature phase change materials for applications in Latent Heat Thermal Energy S     

Biodegradable PLA based nanocomposites for packaging applications: The effects of organo-modified bentonite concentration

The effects of concentration and surface modification of two Brazilian bentonite clays on nanocomposites' properties based on polylactic acid – (PLA) were investigated. The samples were prepared by the extrusion/injection method to obtain biodegradable packaging plastics. The raw materials and their bionanocomposites were characterized by various techniques. Natural clay samples presented a size of around 2 μm while the modified ones' size was 5–6 μm, probably due to the presence of cetyltrimethylammonium bromide in the interlayer space. The particle size and the contact angle increased with the treatment and the clay's density decreased. The organoclays were homogeneously dispersed in PLA, which can be associated with the interactions between PLA chains' carbonyl groups and the organoclays. The bionanocomposites present modified clay particles axis aligned to the flow direction of the extruder/injector. Chocolate organoclay acts as a nucleating agent to PLA crystal growth, increasing the sample's crystallinity, while Bofe organoclay interferes with the amorphous chain's mobility and diminishes the sample's crystallization. The addition of both organoclays to PLA diminished the sample's elongation at break and strength, although the organoclays increased the sample's Young modulus, even though Bofe organoclay is more active in PLA amorphous phase and Chocolate organoclay on the crystalline one.