How nanoparticles encapsulating fluorophores allow a double detection of biomolecules by localized surface plasmon resonance and luminescence

The paper shows how polysiloxane particles encapsulating fluorophores can be successfully used to detect biotin-streptavidin binding by two types of technique. After functionalization of the particles by streptavidin, the fixation of the biomolecule can indeed be detected by a shift of the localized surface plasmon resonance of the biotinylated gold dots used as substrate and by the luminescence of the fluorophores evidenced by scanning near-field optical microscopy. The development of particles allowing such a double detection opens a route for increasing the reliability of biological detection and for multi-labelling strategies crossing both detection principles.     

Mapping the spatial distribution of charge carriers in LaAlO3/SrTiO3 heterostructures

At the interface between complex insulating oxides, novel phases with interesting properties may occur, such as the metallic state reported in the LaAlO(3)/SrTiO(3) system . Although this state has been predicted and reported to be confined at the interface, some studies indicate a much broader spatial extension, thereby questioning its origin. Here, we provide for the first time a direct determination of the carrier density profile of this system through resistance profile mappings collected in cross-section LaAlO(3)/SrTiO(3) samples with a conducting-tip atomic force microscope (CT-AFM). We find that, depending on specific growth protocols, the spatial extension of the high-mobility electron gas can be varied from hundreds of micrometres into SrTiO(3) to a few nanometres next to the LaAlO(3)/SrTiO(3) interface. Our results emphasize the potential of CT-AFM as a novel tool to characterize complex oxide interfaces and provide us with a definitive and conclusive way to reconcile the body of experimental data in this system.     

Nano-polymer-dispersed liquid crystal as phase modulator for a tunable vertical-cavity surface-emitting laser at 1.55 mum

We demonstrate what we believe is the first nonmechanical tunable vertical-cavity surface-emitting laser operating in the C band. This was achieved as a result of the combination of an InGaAs quantum well structure with a 6lambda thickness tunable index nano-polymer-dispersed liquid-crystal material. Experimental results exhibited a potential tunable range close to 10 nm, in the preliminary version, and excellent single mode locking due to the side-mode suppression ratio (more than 20 dB) over the whole spectral range. Another decisive advantage, compared to mechanical solutions, was the tuning response time of a few tens of microseconds (>30 micros) to scan the full spectral range (10 nm), making this device appropriate for some access network functions, as well as being robust and low cost. The voltage values are the main limitation to wavelength range extension. We present a first version of the device optically pumped. The next version will be electrically pumped as required for the access network applications targeted here.     

Entangling atoms and ions in dissipative environments

Abstract

Quantum information processing rests on our ability to manipulate quantum superpositions through coherent unitary transformations, and to establish entanglement between constituent quantum components of the processor. The quantum information processor (a linear ion trap, or a cavity confining the radiation field for example) exists in a dissipative environment. We discuss ways in which entanglement can be established within such dissipative environments. We can even make use of a strong interaction of the system with its environment to produce entanglement in a controlled way.     

Quantum correlations,local interactions and error correction

Abstract

We consider the effects of local interactions upon quantum mechanically entangled systems. In particular we demonstrate that non-local correlations cannot increase through local operations on any of the subsystems, but that through the use of quantum error correction methods, correlations can be maintained. We provide two mathematical proofs that local general measurements cannot increase correlations, and also derive general conditions for quantum error correcting codes. Using these we show that local quantum error correction can preserve non-local features of entangled quantum systems. We also demonstrate these results by use of specific examples employing correlated optical cavities interacting locally with resonant atoms. By way of counter example, we also describe a mechanism by which correlations can be increased, which demonstrates the need for non-local interactions.     

DIFFERENCES IN MALTING PERFORMANCE BETWEEN BARLEYS GROWN IN SPAIN AND SCOTLAND

Two barley genotypes were grown, in 2 seasons, at sites in both Scotland and Spain. The development of enzyme levels and endosperm modification were assayed, over the final 3 days of malting. Spanish grown samples demonstrated faster and more extensive synthesis of both α-amylase and β-glucanase, more rapid cell wall modification and a greater reduction in milling energy during malting than Scottish grown samples. Malt milling energy was strongly associated with cell wall breakdown, which was a limiting step in modification of Scottish, but not Spanish, grown samples. Extract levels were not related to α-amylase activity, but Kolbach index exhibited an association with extract at both sites.     

道路旁大气悬浮微粒之理化特性及污染源解析

旨在探讨道路旁悬浮微粒之理化成分,并解析其可能的污染来源.悬浮微粒采样作业于2003年5月～2004年1月期间进行,悬浮微粒样本采集时间包括春、夏、秋、冬四季的假日与非假日,所采集的悬浮微粒样本经化学成分分析可得水溶性离子成分与金属元素成分,并透过化学质量平衡受体模式及逆轨迹模式进行污染源解析.测量结果显示,假日的大气悬浮微粒PM10浓度高于非假日,而假日与非假目的总悬浮颗粒则无明显变化.此外,道路旁悬浮微粒PM10主要受非交通源的长程传输与当地的交通源所影响,而总悬浮颗粒则主要源自于附近道路的车行及逸散扬尘.另就悬浮微粒化学成分而言,金属元素成分以Ca、Fe、Al最多,水溶性离子成分则主要为SO42-、NO3-、NH4+等二次污染物.受体模式及逆轨迹模式分析结果得知,污染来源主要为交通污染及道路扬尘,然而,亦有相当部分的污染来自上风处的非交通源.     

Allometric relationships in the bioconcentration of heavy metals by the edible tropical clam Gafrarium tumidum

Although metal contamination is a problem of major concern in the lagoon of New Caledonia due to intense mining activities conducted on land, very little is known on the metal ecotoxicology of local marine organisms. The clam Gafrarium tumidum was investigated to assess its usefulness as a bioindicator species of metal contamination in this lagoon. More particularly, allometric relationships between metal accumulation and clam size were determined for five common metals in New Caledonian lagoon waters (Cd, Cr, Co, Zn and Ag) using a highly sensitive radiotracer technique. Experimental results showed that allometric relationships were dependent on the element and on the body compartment considered. As a rule, allometric relationships of metal concentration factor were more pronounced in shell than in soft parts. Significant relationships with clam size for Cd, Cr, Co and Zn followed inverse power functions. In contrast, the degree of Ag bioaccumulation was positively correlated with size. In view of the literature on Ag in bivalves, the latter observation suggests the occurrence of a specific detoxification mechanism (sequestration) that would be more efficient in old individuals. Overall, the experimental results indicate that the use of G. tumidum as a bioindicator in monitoring programmes requires selecting individuals of a specific size range in order to obtain comparable information about ambient metal levels. Since the size effect is greatest among smaller individuals, it is recommended to select clams with a shell width greater than 35 mm.     

Optimal contracts decision of industrial customers

This paper develops a software package to calculate the optimal contract capacities for industrial customers. Based on the time-of-use (TOU) rates employed by the Taiwan Power Company, the objective function is formulated, to minimize the electricity bill of industrial customers during the whole year period. Evolutionary programming (EP) was adopted to solve this problem. Users can get the optimal contract capacities for the peak load, semi-peak load, and off-peak load, respectively. Practical load consumption data were used to prove the validity of this program. Results show that the software developed in this paper can be used as a useful tool for industrial customers in selecting contract capacities to curtail the electricity bill.     

Isolation and characterization of copolymers of beta-lactoglobulin, alpha-lactalbumin, kappa-casein, and alphas1-casein generated by pressurization and thermal treatment of raw milk

Raw skim milk was submitted to high pressure (300 to 600 MPa) and temperature (4 to 70 degrees C) treatments for 2 or 5 min. The combined effects of pressure and temperature on milk proteins induced structural changes and polymer and copolymer formation characterized by anion-exchange and size-exclusion fast protein liquid chromatography and electrophoretic techniques. Approximately half of the beta-lactoglobulin formed polymers, and the other half formed large copolymers, mainly with kappa-casein, alpha-lactalbumin via intermolecular disulfide bond exchange, and alpha(s1)-casein via physicochemical interactions, in proportions of 1.0:0.7:0.3:0.1, respectively. Minor whey proteins (serum albumin, immunoglobulins, and lactoferrin) also participated in the formation of the copolymers but to a lesser extent. Two populations of the copolymers were found with apparent molecular masses ranging from 440 to 2000 kDa for the first and more than 2000 kDa for the second. On the contrary, for heated milks the aggregation kinetics obtained by combination of high pressure and thermal treatment were very fast, as no intermediates such as dimers and small size oligomers were observed after pressurization, whatever the temperature studied. Lactosylation of proteins as well as proteolysis were very limited. A beta-casein amino-terminal peptide of 22 kDa was specifically recovered in milk samples treated under the more drastic conditions (500 MPa/55 degrees C per 5 min and 600 MPa/70 degrees C per 5 min) and might have been generated by neutral proteases such as elastase released from somatic cells present in milk. No casein was released from the micelle whatever the combination of high pressure and temperature studied.